Biqu H2 V2S Lite 4010 Cooling Fan Duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the model from Sumerlin_Designing to better line up with the V2S Lite due to the longer nozzle/heat block.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remixed the model from Sumerlin_Designing to better line up with the V2S Lite due to the longer nozzle/heat block.
I added a little more than 10mm along the Z axis and relocated the mounting holes to accommodate for the difference.
Print Instructions:
Print in the orientation of the STL, with the duct positioned the way it would be installed on the extruder. Will need supports touching build plate, I printed with tree supports.
Printed in PLA as the duct stays quite a bit away from the nozzle/heat block. Should not have any issues printing this in PETG though.
NOTE: I don't believe the 4010 fan will be a long term cooling solution but had an extra one from my Ender 3 so needed to fit it while I wait to receive a 5015.