Liczymy pasujące modele…
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
________________________________________________________________________________________________________________ 🇬🇧English🇬🇧 ((In 🇫🇷Français 🇫🇷 at the bottom of the page )…
This model was originally posted on thingiverse by me and is still available there if you want to read through the many comments and questions. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the…
This is a simple honeycomb fan grill for 40x40mm fans, as they are typically found on consumer grade 3D printers.
Disclaimer: Before you start doing anything with electrics, make sure that you understand what you are doing and comply with all conditions for your safety, the safety of others, as well as the safety of equipment.…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
MK15.1 is the latest and suggested version to use, the other versions may not work as expected but have been left here for users that already have the previous versions and want to print it again. Hexagon Pattern can be printed with two…
Print settings: KP3S V6 Heatsink Cooler.stl - NEEDS SUPPORTS 5015 Fan Holder.stl - NO SUPPORTS KP3S Nozzle 5015 Duct.stl - NO SUPPORTS (print slower - high overhangs) You need to print 3 files for the complete assembly. Variations below.…
4010 Mount for Ender 3 v3 se
Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
Fan shroud diffuser with better airflow, and compatible with Sand's Lightweight Fan Shroud. Like many of you, I experienced the shrieking death of the stock 2510 cooling fan on my Ender 3 V3 SE. I liked TheDude's fan shroud, but found it…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
ok i have fixed the old versions flaws and now this works great. make sure to have the fans blow away from the board. the MCU fan now blows out the original hole. you can make these changes in your printer.cfg to have the fans use PID.…
After realizing my factory fan duct was broken I quickly drafted this replacement fan duct up to get back to printing. I am currently testing this in PETG (ABS recommended) and will be providing a couple of improvements soon. I will…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
Based on the ingenious design by [jwags55](https://www.thingiverse.com/jwags55). This remix is designed to fit standard 4010 fans (with or without built-in nut traps). It should be a tight fit on 35mm DIN Rails and hold the fan securely.…
3D-printable replacement blades for the extruder cooling fan. The cooling fan placed in front of the extruder's heat sink has the important job to keep things cool above the hot end. By accident and a bit of bad luck the fan blades can…
Satsana Duct 5015/4010 with support to BLTouch and Pinda inductive probes remix This is a remix of the amazing Satsana Ender 3 Fan Duct by eric-anastas and max_davis's remix to support the BLTouch probe. Main enhancements of my remix:…
Following several cooling problems with my Dragon HF hotend, I noticed that with a 4010 fan more air was being blown back than was cooling the hotend, so I increased the thickness slightly to smooth the air flow.
Lista de materiales - Material list: 1 unit - Screw DIN 912 M3x10 1 unit - Inductive sensor M8
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
3D-printable replacement blades for the extruder cooling fan. The cooling fan placed in front of the extruder's heat sink has the important job to keep things cool above the hot end. By accident and a bit of bad luck the fan blades can…
Basic BigTreeTech ADXL345 accelerometer to mount to the 4010 axial fan that comes with Creality Stock Hotends. Screws Needed: M3x4 (Mounting the ADXL325) M3x14-20 (Possibly even bigger. This depends on your current setup. I needed M3x16.…
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this. It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). As I only had a 24V fan laying around, I…
Extended the mount by 5mm. This way, the fan is further away from the back panel, the flow is then less restricted.
This design features a unique mounting system that positions the fan in front of the Raspberry Pi rather than on top, which is ideal for tight spaces. This also supports cooling when utilizing a Waveshare USB tophat, which traditional…
remixed mini Satsana dual 4010 light with CR touch mount for my ender 3 pro, allowing the CR touch to be a little lower to match the height of the air ducts and with a little more distance from the fan, for easier access to the mounting…
Revisions v3 : Has a more directed airflow and mounting holes for a BTT AXDL345 module. Allover better design. v2 : More robust mount system. Features While there are multiple pretty good cooling mods out there I missed one with all the…
When upgrading the machine with an SKR Mini E3 , the original electronics cover no longer fits. I recreated the cover to restore a look closer to the machine’s original appearance. The files provided allow you to print the cover either as…
Rigid and reduced air-flow leakage towards parts. (unwanted air over high-temp parts is not good design) X-Plus 3 Part.
Suitable for standard mounting points Material: PETG Resolution: 0.2 Supp: Yes Magnets 5*2 for 4020 fan mounting - 2 pcs are enough
This replacement fan blade fits a Ryobi blower model RY404010VNM and works great using PLA material and nozzle 0.4.
⚠ Please note: So far, I haven't had time to print and test this model myself. If you run into any issues — please leave feedback so I can improve it. 🧾 Disclaimer Before working with any electrical components, make sure you fully…
With the OG model had to heat the model and bring it down a little, i made a remix, it should allow you to bring the fan duck up and down.
Since I love the Stealthburner but its cooling performance is poor, here's my version. For Rapido and Dragon UHF hotends. As hotend fans, the 4010 works at 100% and the 4020 at around 65-70%. Printed in 0,2 mm Layer hight with PC…
SE version. Added slot for a visualizer and two 4010 fan blower. Ducts separated from cover so it is easier to replace and print. Gonna update the ducts for better ones.
Combined the original fan shroud aswell as the "spoiler" remix which guides the air better. Also noticed during assembly that the original model didn't leave enough space for the power cables of the dryer. When closing up the bottom, it…
It's a mini Satsana, but it has a 4010 axial fan on the side instead of a 4010 radial/blower fan. Use m3 brass inserts for the fan mounts.
This blower fan cooling duct is angled down and straight out. Printer: ANY Nozzle: 0.4 mm Line Width: 0.30 mm Layer Height: 0.10 - 0.20 mm Speed: You pick speed for best printing Filament: ABS, ASA, PCTG, PETG, etc.
Dual 4010 fan. This model has a place for mount the crtouch also. Since I couldn't see nozzle while printing at the first model I decided to carry fans up and extend the ducts. And 4010 axial at the heatsink didn't make any difference so…
Remix de la caja OrangePi Zero 3 para ventilador de 40 mm. OrangePi Zero 3 case remix for 40mm fan.
Orange Pi 3 LTS Bracket & 4010 Fan Mount (Personal Use) The fan and bracket are secured with M3 nuts. The lower section does not include a protective guard. For personal archival.
4010 blower against CPAP
Esse Reparo do Fan é preciso ser feito com cautela e com muita paciência. Use um alicate para aneis para poder remover a helice ou algo de consiga empurrar os dois lados da helice para cima, para não quebrar a carcaça e tomar muito…
These blocks may appear as simple as a printable model gets. Designing them was unexpectedly meticulous; implementing automated mesh exports required additional technical effort; and in the end, the range of practical use cases turned out…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, ABS, GreenTec, GreenTec Pro or similar). New Version 2024-04-07:…
Рычаг привода картриджа Canon MF 4018-4010-4270-4690 FC7-3647 Category: Electronics
Simple Skid plate for WLtoys 144010 - 144001 RC buggy 1/14. Use 4 M2.5x12mm screw. Print in Petg but PLA will work too. Made with Tinkercad.
New design incorporating a 4010 fan. ****************************************************************************************************************** NOTE MUST REDUCE MAX Y DISTANCE TO 273MM TO MAKE CLEARANCE WITH X AND Y STEPPER MOTORS…
Other Hemera ducts are for large blower fans, often at an angle, which is fine for bed-slinger printers, but severely reduced my Y-axis on my Ender 5. The bottom surround is definitely someone else's design, but I tried so many so long…
Mounts a 4010 blower fan to a 1515 extrusion. Mainly targeted at under the Micron printer bed. But could be used in other orientations as-needed. I never printed one of these, seems that it needs supports. BOM (simply modified to have one…
Noticed a gap between the outlet of the 4010 fan and the inlet to the Satsana fan duct. Not sure if this was specific to the version of Satsana I was using but I've seen it mentioned elsewhere as well so I doubt that's the case. I wasn't…
Thanks Emil for his STEP model. I bought a Creality ceramic unicorn quick swap nozzle kit but when I install it I found out that there is gap around between the fan shroud and hot end nozzle - so to do not loose the airflow, I fit the…
Models are printed in PLA+ (eSun) at 200c. Duct doesn't seem affected by heat creep from nozzle proximity. Standard settings in Creality Print V5 seem to work well but feel free to play around. Stock 4010 fan and fittings can be used to…
Ajout d'un régulateur de température en 24V continu alimenté par le 24V de la carte du plateau chauffant couplé à 2 ventilateurs 4010 en 24V DC Ensemble des pièces à utiliser avec ce Remix que j'ai effectué :…
Boitier de protection carte du plateau chauffant pour une ventilation avec 2 ventilateurs 4010 et une sonde thermique
Inspired by Valerie's work. Not better, just using fans I have. Stock 4010 for Host cooling and 6010 for the drivers. Not intended to work with the stock covers (but may fit), my printer is well away from kids and kitty fingers. Host fan…
I designed this fan adapter to upgrade from loud 30mm standard fan to a bigger 40mm one. Adapter has a hole at the bottom of 40mm fan flange for M3 bolt to thread into if you choose to use the included modified fan nozzle to add extra…
converted to radial fan 4010 redesign fan duct to direct air nearer to nozzle
These toolhead boards get hot, crazy hot, especially the BTT SB2209 RP2040. Before it burns up I decided to add active cooling. I initially made one with a 3010 fan which took the temp down to ~65-70 depending on print time which doesn't…
This is a tool board protective base with a fan mount for cooling the Orbitool tool board mounted to a Orbiter2 extruder. I remixed it to support a 4010 fan and the umbilical cable. Printed in ASA 5 walls, bottom and top. Orca 2.2.0 If…
This mount enables mounting three 40x40 fans to cool the motor drivers. Standoffs are required (I did use 25mm standoffs but it depends on the height of your motor drivers so better test yourself) and each fan requires heatset…
NVIDIA Tesla P40 Shroud with 2x4010 Fans on top instead of bottom
I remixed Nadir's CN3D cover version for a 4010 fan above because I didn't have a 3010. I also added some holes for cable tie mounting and optimized air outlets. Before use, check the distance between the cover and the upper front…
I bought a steel fan proctector for my ender 3 and I thought, why not print one? so here it is
Build as described in the manual https://rh3d.xyz/build_guide.html
Want to turn an ordinary WLToys 144001 or 144010 RC Car into one not driven by its wheels, but by an extremely powerful Electronic Ducted Fan commonly used in RC Airplanes? Here are the 3D files you need! Also check out this video I made…
Booty made a great mod, but it makes use of a lot of extra hardware (bolts, heatset inserts, etc) that I felt was just unnecessary. Now, the only hardware used are the screws already attached to the printer. No need for additional screws,…
Basic BigTreeTech ADXL345 accelerometer to mount to the 4010 axial fan that comes with Creality Stock Hotends. Screws Needed: M3x4 (Mounting the ADXL325) M3x14-20 (Possibly even bigger. This depends on your current setup. I needed M3x16.…
This is targeted at Ender3 series of printers and similar style, if using a different backplate than stock ender3/3pro/3v2, you can get those aftermarket, but I would then simply recommend you install a linear rails instead anyway, a much…
Full satsana, double 4010 fan with bl touch and mounting nuts! No additional hardware required, stock hardware only
I bought some thick(12mm height)thermal from mcuzone,and seems most case model won't fit,so I designed this one with below features. Support thick (12mm) thermal. 4010 PWM fan TF Card Exposed Power Button Exposed GPIO Pinout Exposed Use…
An additional Carbon Filter with Dual 40mm Fans It is recommended to use 4mm or Larger Pellets You need 4x30mm 4x35mm M3 Screws (both will work) to fix the Carrier and Cover There are multiple options with inserts without inserts with…
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
This 4010 extended blower duct is specifically designed to optimize airflow for the K1 CHC (Ceramic Heater Core) Hot End , seamlessly integrated with the Toybox Alpha 3D Printer's stock fan location . The duct channels airflow efficiently…
Remix of https://www.thingiverse.com/thing:1746358 I wanted to use the original version together with this Bondtech mount for my HEVO: https://www.thingiverse.com/thing:2768735 But I needed to mirror it, so I modified it to be used with a…
A mod that moves the CR-Touch back is a must needed e.g. https://www.printables.com/model/716958-linear-x-rail-mod-ender-3-v3-se The Toolhead cover for Ender 3 V3 SE. Design motevated by Ender 3 V3 KE. You need x2 4010 blower fan, x1 4010…
As said above a modified shroud made to fit three 40x10 fans. Low profile mount for the hot end for reduced air travel and sleeker look. Also vertically rotated nozzle cooling fans with a customized exhaust for optimal cooling (Aero…
4010 format cooler holder for cooling the extruder motor to solve the known problem of overheating and jamming of the rod. It features convenient installation - without the need to remove the filament and reinforced side holders. Printed…
I originally made it for a new fanduct, I designed for my Phaetus Dragon. You can find it in my prints :-) It fits a standard 4010 blower fan. Print time for me was about 1 hour.
Print in PETG, 0.2mm layer height, no support required. Press fits nicely. Do this mod at your own risk. :) (Optional but recommended) Carefully push the fan blades from both sides to remove the fan blade rotor from the casing. Cut all…
BE SURE TO HAVE ENOUGH FRESH AIRFLOW TO THE BLOWERS OR A WAY FOR THE HOT AIR TO SCAPE AFTER IT HIT THE DRIVERS, THEY WOULD OVERHEAT IF ENCASED WITH THE BLOWERS ONLY.…
Version 2 : Download If you've already tried it, Please leave a comment. Thank you! Support tree auto With Threshold Angle 20° Using filament, PETG at a minimum or ABS would be better. Printing With Polymaker ABS G10 Build Plate Result..
La mise place de ce montage accélère la montée en température du caisson et homogénéise la chaleur dans le volume. Sur la creality K1C il y a un cache frontal devant le lit chauffant, il est fixé par 2 vis M3, après retrait du cache…
This is a fan duct for a CR10s Pro using the MicroSwiss DirectDrive and AllMetalHotend to mount two 4010 radial and one 4010 axial fan while keeping the stock position of the stock probe! The model was a request made on my discord server,…
This encases the entire bottom and side of the Raspberry Pi 4 board with an opening on the bottom for easy removal of the microSD card. Utilizes two low profile DIN rail mounting brackets for a sturdier and secure installation of the Pi 4…
