HP LSI 9207-8e 4010 radial fan duct
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this.
It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers).
As I only had a 24V fan laying around, I added a little bracket to add a step-up converter.
it's press-fit, so no additional hardware required, unless you also need a step-up of course.
In the picture you can see some electrical tape, that because the wall were too thin and broken, but I updated the part.