1 / 2
HP LSI 9207-8e 4010 radial fan duct — image 1
1 / 2

HP LSI 9207-8e 4010 radial fan duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this.

Rating
5 / 5
Likes
6
Downloads
48
Makes
0
Views
523
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

I needed a low profile fan duct for my HBA card inside my space constraint hp EliteDesk 800 G4 SFF so I created this.

It uses an 4010 radial fan (mostly found as part cooling fans for 3d printers). 

As I only had a 24V fan laying around, I added a little bracket to add a step-up converter.

it's press-fit, so no additional hardware required, unless you also need a step-up of course.

In the picture you can see some electrical tape, that because the wall were too thin and broken, but I updated the part.