1 / 6
4010 / 4020 fan shroud for ceramic quick swap hot end
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
updated original Emil's model to fit slimmer hot end heat sink
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 240
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks Emil for his STEP model.
I bought a Creality ceramic unicorn quick swap nozzle kit but when I install it I found out that there is gap around between the fan shroud and hot end nozzle - so to do not loose the airflow, I fit the shroud to my porpose.
