Liczymy pasujące modele…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
The Ender 3 S1 has been a great machine so far except for the loud hotend fan. I had a spare 4020 blower fan so I designed this bracket to replace the one found on the sprite extruder. Even at 100% I've found it to be quieter than stock,…
Simple model of fan cover with voronoi style. Space between fan and tall fan covers might help with noise reduction, i haven't really tested it.
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Voronoi fan cover Printer mods: Tool holder Filament…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
Recently upgraded to the Micro Swiss NG for my Ender 3 v2. While the kit from Micro Swiss includes a shroud to use the stock 4010 axial hot end fan and 4010 blower part cooling fan, I wanted to use larger fans. I looked around and found a…
Simple dual 4020 blower fan cooling duct for BIQU H2. Simple and low profile, it is height adjustable via the 2 mounting slots that connect directly to the H2. print gets fairly thin by the duct so .4mm nozzle or smaller would be best,…
This is a remix to the Red Squirrel fan duct found here: https://www.thingiverse.com/thing:4170231 and https://www.thingiverse.com/thing:4763804 I modified the front fan so that a 4020 fan would fit without overhang. This is for an…
Simple stand for 4020 extrusion. Used it for: https://www.printables.com/model/76059-jo-presser-threaded-insert-heat-press Dimensions: Extrusion hole - 20.40x40.40mm Mounting hole - 4.3mm
I designed this shroud to keep my 14TB EasyStore cool as it would consistently run around 55C which is way too hot for a drive. After this mod, my temps are typically 31C which matches that of the drives in my computer case with dual…
Have constructed a stand for the Perplexus puzzle from with the Thingiverse ID3402067 maybe someone can use it Perplexus Puzzle https://www.thingiverse.com/thing:3402067 including holder for two balls Category: 3D Printing
This socket is needed when the original fan of the Creality Ender 2 is replaced by a quiet Cooltec 4020 fan. The holder of the original fan is not compatible with the Cooltec 4020. Print Settings Printer: Creality CR-10 Rafts: Doesn't…
🧵 BMG V6 ABL Direct Drive Extruder - Dual 4020 Remix Este diseño está pensado para quienes buscan precisión, refrigeración eficiente y facilidad de mantenimiento en su extrusor directo. ✔ Compatible con BMG + V6 ✔ Sistema Direct Drive…
I modified a 40mm shroud, so that it can carry 60mm fan with a 4020 blower for part cooling. DEAD quiet with half the rated fan voltage (the bigger fan manages to cool it on lower RPMs) Printed with PETG, infill about 70% (its just around…
This is a multi-fan mount designed for 3 4020 fans (I may add a 4 fan model in the near future), that is designed to mount a XH Splitter fan port multiplier board. I created several places where zip ties can be used to secure fan cables…
Key changes: Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. Works with Sprite Extruder SE that also mounts to the stock carriage.…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
This is a remix of @GalvanicGlaze’s Diplo Duct – Ender 3 V2 4020 BMG Direct Drive. I’ve modified the model to better suit my setup: Adjusted the backplate to fit my linear bearing mount for the hotend Modified the extruder mount to work…
Revisions v3 : Has a more directed airflow and mounting holes for a BTT AXDL345 module. Allover better design. v2 : More robust mount system. Features While there are multiple pretty good cooling mods out there I missed one with all the…
John Deere 4020 NFE (Narrow Front End) - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A…
To make the 4020 1/64 scale, start by scaling it down to %12.5 (in mm) Here's a link to the 4020: 4020 Tractor
UPDATE: Made a v2 to give 2mm more clearance at the bottom of the chamber. Will prevent the fan touching the bottom motor mount during homing when the bed is at the max height. Pretty self-explanatory. Pick the model that matches the M3…
E3D snap on fan duct for 3010 axial & 4020 radial fan
I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store Check out my other AD5X replacement parts,…
Since I love the Stealthburner but its cooling performance is poor, here's my version. For Rapido and Dragon UHF hotends. As hotend fans, the 4010 works at 100% and the 4020 at around 65-70%. Printed in 0,2 mm Layer hight with PC…
Simple fume extractor with 12v 4020 fan. Hardware: - Boost DC-DC 3,7V - 12V module - Usb-C connector - 4020 12v Fan - Switch button
Carro para la sapphire plus, con ventiladores 4020 , se apoya sobre la chapa original dela maquina, gana mas de 8 mm de alturaa tambien. ** Añadidas nuevas toberas optimizadas, levantadas para que no rozen, y mejora del entrante , aumento…
Remix of stock Micro Swiss cooler for the NR Revo to fit 4020 blower
I ran 3, 24 awg wires, from the RGB through the housing and added a piece of heat tube where the wire is exposed on the outside. I ran it outside because I am not great at Fusion 360 and didn't know how to mod the file any other way at…
After upgrading my Layer Fans to 5015's, the stock 2010 Diffuser Fan looked comically tiny. This mount directs the airflow of a 4020 Fan to the Diffuser. Note: The Fan just slips-in… No screws. If tolerances make for a loose fit, a dab of…
Now with new version ender 3 drilling template - Future improvements will include threaded insert support for the limit switch and an adjustable Y belt tensioner. For a single top mounted MGN linear rail. This set of files will allow you…
4020 Part Cooling fan for the K1, K1 Max. Parts - Stock Creality fan, and 4 M3 Bolts ( 2 M3x15 and 2 M3x5) I printed this with ASA for high temperature durability. You will need supports for the outside only. Also, you will need to remove…
The original fan duct of the creality CP01 with the fan intake sucking hot air from the bed isn't very good, so I designed a fanduct to use a 4020 blower located next to the extruder stepper motor.
Thanks Emil for his STEP model. I bought a Creality ceramic unicorn quick swap nozzle kit but when I install it I found out that there is gap around between the fan shroud and hot end nozzle - so to do not loose the airflow, I fit the…
I designed this fan adapter to upgrade from loud 30mm standard fan to a bigger 40mm one. Adapter has a hole at the bottom of 40mm fan flange for M3 bolt to thread into if you choose to use the included modified fan nozzle to add extra…
A very specific title for a very specific part. Technically this is not the entire end effector, just the groovemount portion, so it's compatible with any basic end effector that supports groovememounting (mine is aluminum). Designed to…
NOT TESTED YET! Knomi v2 mount, which goes in front of the hummingbird extruder. For the front half, use arachne (in the slicer), with minimum wall width of 40%, and minimum feature size of 15%. Has wire management and place to put the…
This mount enables mounting three 40x40 fans to cool the motor drivers. Standoffs are required (I did use 25mm standoffs but it depends on the height of your motor drivers so better test yourself) and each fan requires heatset…
Español: Esta es una montura magnética diseñada específicamente para impresoras 3D Ender 3. Incluye un ventilador 4020 que proporciona un enfriamiento eficiente del extrusor o la pieza de impresión. Su diseño modular permite una…
It all snap fits into place but I strongly advise bolting it down if you're gonna move it around often or will put it somewhere it might fall. The top piece needs supports for the bottom of the screen hole The 4 holes on the side can be…
Just a simple can cover for the 4020 5015 satsana fan duct, I used 4 m3x25 bolts
Used in 1982-1985 Celica and FJ60 Land Cruiser and many more. If it fits your car let me know and I'll update the description. Printed using ABS. Make sure to use a material that's temperature resistant. Being modelled after something…
4020 fan air assist for lasers, suits 40mm x 40mm wide laser modules diode laser cutting and engraving
V2 Nozzle design now available, blower outlet now closer to nozzle, new design has improved air coverage and control This is an adjustment to ILAN SABAR Creality Ender 3 V3 KE Extruder Housing to allow for 24volt 4020 Blower fans aimed at…
Made For A 4020 Blower Fan How To Get All Needed Parts Go to Auxiliary Fan Then Go To The 5015 Folder To Get Everything Needed Credits To @JacobG3231_143196 Also if you are wondering what the small fan with the voron logo is it is a…
Final, tested, and working. Option 1 Separates the fan shroud from the extruder shroud like the original fan. uses new fan shroud with magnet that connects to original extruder connection magnet. also uses tab to align with tab hole,…
Voron Stealthburner with 4020 mm fan. Since it is now about 12 mm thicker and would hit the door with case extensions for 250 mm Trident and 350 mm V2. The fan goes in a bit fiddly. But there was no more space. You might have to sand the…
I noticed my Ender 3 had a slight wobble when sitting on an even tabletop and I couldn't seem to adjust it. Printing these legs fixed my issues. Plus, elevating the printer 2" made it much easier to move around when needed. I also added…
The rocker is deisgned to help rotate a printer onto its back to allow for easy access to electronics. It is inspired by similar Rock n Roll mods for Voron printers. Printing with 0 bottom and 0 top layers can give for a nice effect,…
A brand new design of a backplate for ender 3 s1 sprite extuder. Mainly designed to be used with my SpriteBurner cooling duct v2. New update has a filament cutter for my hopefully upcoming multi filament build. Uses a 4020 hotend cooling…
This is an M12 size inductive probe mount that fits in combination with @Elias_1320404 's Dual 4020 Satsana remix hot-end cooler for the Ender3 and Ender3Pro. Also fits when using @Senkii_375738 ‘s Ender3 Direct Drive mod and clears…
Update - added LED Bar for nozzle lighting. Hi, this is my newest part cooling solution for the Ender 3 S1 (Sprite Extruder). In this version, I focused on making the model much sturdier while keeping the unobstructed view of the nozzle.…
My father in law asked me to print out replacement feet for an ironing board ordered from Amazon that came with 2 of the protective feet missing. They had tried to return the ironing board when it first arrived with one foot missing but…
A version of the Mini-Satsana for the ender-3 which supports a single 4020 blower fan and a BL-Touch
Drill holes all the way through the fan shroud in the threaded nuts where the stock fan mounted with a 1/8" drill bit (see pictures). Install M3 heat-set insets on the side that faces the hot-end. (I used 10mm long inserts) Printed the V1…
This remix makes the feet a little stiffer, and about 50% wider. Finally I made the horizontal sections solid for added strength. I absolutely do like the original, but when 8 of them break, snap, collapse in 2 weeks time, I need to get…
It's an extension to https://www.printables.com/model/549938-4020-blower-fan-adapter-for-sovol-sv06-and-sv06-pl It's a snug fit, so it will hold the regulator in place without glue or anything. It also has a side-effect of illuminating…
I modified a 40mm shroud, so that it can carry 60mm fan with a 4020 blower for part cooling. DEAD quiet with half the rated fan voltage (the bigger fan manages to cool it on lower RPMs) Printed with PETG, infill about 70% (its just around…
[UPDATE Feb 15, 2022]: I made an update of this mod which you can find here https://www.prusaprinters.org/prints/134733-updated-satsana-50154020-fanbltouch-for-ender-3-en Thanks! [UPDATE Feb 12, 2021]: Uploaded the .step files for the…
Untested, my printer has been down for over a month. in order to use a 4020 fan the mount needed to be altered, and the fan housing altered to be one piece, just like stewy's design, the difference is this beacon mount is for a 4020 fan.…
Support brace for connecting the 4020 Hotend Fan of the Zuff Duct while using a Taurus Cooling.
a mounting bracket for a 4020 fan (40mm x 20mm). The bracket features: Two elongated mounting slots for adjustability during installation. A cutout section to allow airflow. A flange with bolt holes to securely attach the fan. This design…
John Deere 4020 Tractor - 1:8th Scale Uses M2, and M4 Screws Certain holes will need drilled. Indents on parts show drill locations 0.25in x 11in (6.4mm x 280mm) rod used for rear axle M2 rod used for steering wheel A single M1x6mm screw…
I recently converted my old SV06+ to a 1.0mm nozzle for some fun prints, unfortunatelly i noticed the NAV 5015 fan duct mod wasn't enough to reliable cool things. Then i downloaded the SV07 5015 part fan duct for the front, but…
Deutsch: Ein überarbeiteter Lüfterkanal, um die Materialkühlung zu verbessern. Durch die Anpassung schleift der Fan Duct nicht auf dem Druckbett. Druckeinstellungen: Filament: PETG (PLA verformt sich über die Zeit) Schichthöhe: 0,2mm…
I had some spare 4020 fans left over from building a Xol toolhead and figured I should put them to use as bed fans. Imagine my surprise to find that there are very few mounts available to fit them! These mounts are intended to fit 2020…
The original version is based on the Katz Moses design . It wasn't labled as such but the original is for the 6030 aluminum extrusion. I have smaller extrusions (4020) around that I wanted to use it with so I created this version. It…
I made this to slip over a 4020 fan on my 3d printer, it's got half a hinge I use for mounting a raspberry pi camera module. When I printed this I printed it with 100% infill as I wanted it strong and its walls are thin. I was over…
fan for smoke box G1/2" with or without PWM controller smoke generator for smokehouse designed for fan 4020 120x69x30, 90x69x30mm version without PWM version with fan 5015 https://www.thingiverse.com/thing:6905735 Print Settings Rafts: No…
if you want to operate the magician without an extruder cover (as i prefer), then you need a fan holder like this one. print the holder with heat-resistant filament (PETG, PCTG, ABS, GreenTec, GreenTec Pro or similar). New Version for…
https://temu.to/k/e4gg1j4kd3n 8010 24V FAN The mounting bracket for the motherboard cooling fan allows the installation of an 8010 fan instead of a 4020, using the original 20 mm screws. Printed in PETG. please comment your opinions on…
This is a remix of @0x53 flat mount for 4010 fan that works with 4020 aswell that is sighly longer to accomodate the shallower depth of the hotend heatsink of the Ender 3 V3 SE ceramic hot end upgrade kit. Needed parts: 4020 / 4010 Fan…
A very simple remix of a a 4020 fan assembly for the extruder/coldend . Print as oriented with supports. You will need 3x M3x3mm heat set threaded inserts, 4mm diameter (such as the ones sold in this pack on AliExpress). I've included a…
I wanted to use a noctua fan to reduce the noise from the stock fan and also for better cooling. I've included the STEP file of a simple fan cover so you can modify it if needed. Also included is the STEP file of the door so you can…
My own design for Ender 3 Pro with Klipper. I use KLACKENDER as Z probe and bed mesh. -Direct drive extruder with BMG & E3D V6 combo, NEMA17 Pancake is enough for high speed printing. -Volcano hotend can be used but duct need modifying…
Motherboard mount. I couldnt find all of the dimensions so 1 of the mobo holes is off. Not an issue but check pics. if anyone has exact dimensions, comment and i will update the sketch. Thats why its a work in progress but otherwise…
This adapter screws in place of the stock hotend fan, and have the provisions to screw a 40mm fan over it. So now you can use a normal, probably stronger fan on your hotend. It is also compatible with any fan ducts that fits the stock…
Offset to use 4020 fan with any dual ducts that use a single fan. M3 brass inserts required.
Upgraded hotend fan cooling capable of high temperatures.
Remix of the fan mount for a 4020 fan with tronxy sensor. It positions the duct a little farther than the original from the nozzle so my heat sink fan had room. Picture shown with my replacement carriage from…
The main paper tray from some laser printers from Samsung and HP have a pull "handle" thats very flimsy and thin, causing the handle area to be damaged. This model helps the reinforcement of that area and can even be used in trays that…
This is a remix of the original (link below). Added an adapter for the 4020 fan instead of the 2510 axial fan. It is not fully tested on its performance. Some soldering may be required since the 2510 has only 3 wires instead of 4 for the…
This is a multi-fan mount designed for 3 4020 fans (I may add a 4 fan model in the near future), that is designed to mount a XH Splitter fan port multiplier board. I created several places where zip ties can be used to secure fan cables…
Originally designed for the Centauri Carbon electronics bay, this is generic enough to work in many scenarios and on many printers.
This is an intermediate step in the development of our quiet fan kit for the Elegoo Centauri Carbon. It allows an ElectroCookie quarter printed circuit board (PCB) to be mounted where the 4020 fan resides in the electronics bay of the…
V2 has been published! [bltouch] x_offset: -0.26 y_offset: -34.0
Updates: I made following changes to my Satsana 5015 remix for 4020 fans and BLTouch: Changed the position and the mount for the BLTouch. The mount is now on the left side and fully integrated into the shroud. Change the X, Y, Z offsets…
This is the remodeled version with a more stable mounting solution for the Bl-Touch. I also split the model up so it's easier to print. Print the fan shroud and fan without supports. The dual 4020 fan mount should be printed with…
The original Mini Satsana was designed for Creality printers, but I wanted to put it on my Voxelab Aquila with an upgraded Noctua 4020 hotend fan with the stock 5015 radial fan. This design should also work with the stock 4010 hotend fan…
Google translator is used. My version front fan adapter for ender 3 v3 se. For 4010 fan use M3*14mm screws. Front mounting for wires.
This was made to help with heat break cooling and lower noise. As the original fan we very annoying to listen to. Unfortunately some QoL had te be sacrificed for this to work. like now having a fan connector to deal with and the cover…
![E3NG - Knomi v2 Mount [Hummingbird Extruder] and Extended Bambu Hotend 4020 Fan Duct](https://media.printables.com/media/prints/1033948/images/7845769_fb971539-230d-4fef-8fd6-f0abe3d1d322_30e7bb40-44f4-4782-ab5f-223618a3c9ac/screenshot-2024-10-09-080115.png)
