1 / 3
Apogee FAT For Sprite Extruder SE, 4020 Fan, MK8 / Spider hotend — zdjęcie 1
1 / 3

Apogee FAT For Sprite Extruder SE, 4020 Fan, MK8 / Spider hotend

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed from adms Apogee FAT with no nozzle offset if you use the original hotend and carriage for ender 3 v2.

Ocena
0 / 5
Polubienia
4
Pobrania
13
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Key changes:

  • Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. 
  • Works with Sprite Extruder SE that also mounts to the stock carriage. PTFE tube should be able to go straight to the hotend. 
  • This means both extruder and hotend mounting are independent from these toolhead parts, and all mounting points are metal to metal for good rigidity. 
  • Works with KlackEnder probe by kevinakasam
  • Because of the offset change, further modification is required if you want to use BLTouch. 
  • All mounting points now take standard size M3 hex nut. You should only need 2 for fan cover, 1 for wire cover. 
  • Made some modification to the fan cover to make WINSINN 4010 blower fans fit. If it's too loose, you can stuff some wires in the channel to make a tight fit. 
  • Included step files as this is unlikely to fit most people's needs out of the box, unless you run my exact setup. 

Tagi