1 / 3
Apogee FAT For Sprite Extruder SE, 4020 Fan, MK8 / Spider hotend — image 1
1 / 3

Apogee FAT For Sprite Extruder SE, 4020 Fan, MK8 / Spider hotend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remixed from adms Apogee FAT with no nozzle offset if you use the original hotend and carriage for ender 3 v2.

Rating
0 / 5
Likes
4
Downloads
13
Makes
0
Views
318
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Key changes:

  • Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. 
  • Works with Sprite Extruder SE that also mounts to the stock carriage. PTFE tube should be able to go straight to the hotend. 
  • This means both extruder and hotend mounting are independent from these toolhead parts, and all mounting points are metal to metal for good rigidity. 
  • Works with KlackEnder probe by kevinakasam
  • Because of the offset change, further modification is required if you want to use BLTouch. 
  • All mounting points now take standard size M3 hex nut. You should only need 2 for fan cover, 1 for wire cover. 
  • Made some modification to the fan cover to make WINSINN 4010 blower fans fit. If it's too loose, you can stuff some wires in the channel to make a tight fit. 
  • Included step files as this is unlikely to fit most people's needs out of the box, unless you run my exact setup. 

Tags