Counting matching models…
Just remixed the Hotendholder to fit my linear rail base plate for Ender3 Pro. Design files can be found here: https://orbiterprojects.com/download/Ender/Apogee%20step.zip
This hotend base is intended for Ender 3 V2 Neo. The original model didn't fit, due to a different design of the carriage plate, so mounting holes are in different places. I couldn't find a good way to place the mounting holes, without…
I bought a knockoff Bambu hotend and I already has a Noctua 4020 cooler. There wasn't any toolhead for my needs unfortunately, so I've done one of my most challenging CAD work. Not an engineer here, but a designer. Anyways, I wanted to do…
I like the looks of the Apogee toolhead but noticed there was not a variation that was made for the Triangle Labs CHC PRO hotend ($29 Aliexpress / Amazon) so I jumped into F360 and started designing. This is beta, but I am putting it…
This is an Apogee shroud modification for an "Ender-3 V2 Neo" with a "Micro Swiss hotend" (not usable with the original Neo hotend). Unlike the original Apogee shroud, this modification leaves the CR-Touch mount on the left side. This…
I created a mount to fit the Orbiter Apogee tool head on the Ender 3 max.
I thought the price for the Apogee wand was nuts, and I have a bunch of ½" PVC laying around, so I made this. Seems to work pretty well. I printed without supports.
I modified the MK8 (original Creality) hotend baseplate to fit the Trianglelab TZ E3 2.0 Bambulab clone hotend. Changes i've made: Because the TZ is deeper (14.5mm) then the MK8 (12mm) i've made the baseplate (only in the location the…
Trying out this duct from this project: https://www.orbiterprojects.com/beltender-linear-rail-upgrade-for-ender-printers/ It's pretty minimal and esthetic, still waiting for better 4010 blowers, but had to fit NF Crazy hotend on it.
The Part is already Oriented in the correct way. I increased some tolerances slightly to improve the overall ease of Printing. Print Settings used: · 0.4mm nozzle – 0.4mm layer width and 0.25mm layer height · Bottom layers: 6 · Top…
EDIT jan 17 23 - when finally putting on Orbiter 2, there were some problems. I fixed the issues, reprinted, and all seems well now. Orbiter 2 sits in the proper location, mounting holes are fixed, as well as the wire management chimney…
Modified for better airflow and more rigid.
Modified Apogee tool head to mount to the Aditiva3D EnderXY conversion. All screw holes are modified to accept heat sink threaded inserts. Update 9/16/23 - added files for side mount electronics and new cable management end stops. Zip…
Cable management/dock for Apogee Duet 3 Printed using PLA on Bambu X1C. Supports were manually painted in. I used Heatset Inserts and bolts with these specs: - M3 inserts 4mm tall - M3 bolts, 12mm tall
38mm Motor Retainer This is a screw-style retainer for 38mm high power rocket motors, inspired by similar retainers from AeroPack and Apogee. It securely holds a 38mm rocket motor in the mount so that it is not popped out by the rocket's…
I remix Apogee Orbiter v2.0 by leejsmith tool head for the ender 3 max with Mosquito/NF Crazy hotend with screw brass insert. 6 X M3 4mm brass screw insert Screw size will updated later. For other print part please download from leejsmith…
I have used my orbiter extruder on another printer and had the LGX lite on hand. Step model coming soon. This is my first revision of the part and everything seems to fit so will most likely not make another version
Apogee toolhead adapter An adapter to use the Apogee toolhead with the stock Ender 3 exturder. !!! Attention !!! When using the stock extruder motor, the motor would hit the frame of the printer before activating the X-endstop. To avoid…
This remix aims to integrate the MK8 nozzle mounts into the X carriage itself instead of mounting them onto the existing X carriage of the Ender 3. Due to this, a linear rail is required to mount this variant. I may consider creating an…
4010 blower style fans, may have different dimensions. I have adapted the fanshroud design of the apogee orbiter printhead to fit creality's 4010 fans, which for example were shipped with the ender 3 v2
I wanted to get myself a linear rail mod for my Ender 5, but I also wanted to keep my Apogee as long as possible(I plan to mod it into Mercury ZeroG 1.1). I know there is a better toolhead called EVA, but since I have skills to remix…
This is a simple frame to create a pop filter for a microphone. There is a lot of info on creating pop filters - including using nylon stockings and wire mesh. The basic idea is to prevent the "pop" when a high volume/velocity of air is…
Why make this toolhead when the sv06 already has a good toolhead stock? I fell in love with the toolhead on my Ender 3 V2. However, due to the SV06's use of screws to secure the heat block to the extruder, the heat break often bends out…
Modification of the Apogee toolhead to allow for mounting a PINDA-style 8mm inductive probe onto the toolhead. Utilizes the nuts and washers that came with it. Started with the BL-touch mount and modified it for inductive probe and…
Remixed the Rapido hotend base to fit the TZ V6 2.0.
This deployment altimeter mount places an Eggtimer Apogee atop the 2.5-to-2-inch transition of the Estes Argent. To attach the mount, you'll need to remove the top of the blow-molded transition, and attach with small counter-sunk flathead…
I remixed the original holder to fit the BQ microprobe
Apogee Tool Head - Extended MK8 Mount Moved mounting points down 2mm Some MK8/Microswiss clone hotends are about 2mm shorter than the stock versions. This mounts makes up for it.
Still working on this, but i have it functional and printing more parts. Loved the design so I modified it for my needs, Orbiter 1.5 and Ender 3 Max. I have to use a small 2mm spacer to reach the X limit stop without modifying the frame…
I remixed the two part shock mount by @stcredzero and added a mounting block to attach to the arm of an Ikea Tertial lamp. I made a two part mic holder with matching loops to string the hair binders through which eliminated the need for a…
I modified the MK8 (original Creality) hotend baseplate to fit the Creality Spider 3.0 hotend. Changes i've made: Because the Spider 3.0 is deeper then the MK8 i've made the baseplate (only in the location the hotend mounts to) 1.947mm…
I ordered a clone Bambu X1C style hotend and needed a base plate for my Apogee toolhead. I found only a wider version of this ( https://www.printables.com/model/953172-apogee-fat-for-orbiter-20-bambu-hotend-noctua-cool ), so I decided to…
(Download the new Version (1mm Offset)) Two years ago, I bought the now discontinued Zodiac X Phaetus BMS Hotend . Now I want to upgrade my Ender 3 V2 with an Orbiter Direct Drive Extruder. For that Combination, the Apoogee Tool Head…
I remixed the two part shock mount by @stcredzero and added a mounting block to attach to the arm of an Ikea Tertial lamp. I made a two part mic holder with matching loops to string the hair binders through which eliminated the need for a…
Quick remix of the Belt Ender Mount for the MGN12H carriage, to work with the Revo Voron extruder. · 0.4mm nozzle – 0.4mm layer width and 0.25mm layer height · Bottom layers: 6 · Top Layers: 6 · Walls: 4 · Infill: 75% · No supports needed
Designed an alternative to the Apogee Hotend LIT suitable for NeoPixel LED's with Klipper. Used a blob of superglue only on the center strut to hold the led's in.
Key changes: Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. Works with Sprite Extruder SE that also mounts to the stock carriage.…
In my quest to finally stop upgrading the toolhead on my CR-6, I decided to install a Hermit Crab v2, that way if I have a problem I can just pop the toolhead off instead of disassembling everything in the enclosure or pulling the printer…
I made an induction probe mount for the Apogee toolhead and noticed that i would be able to use more of the print space if the probe was mounted on the left side. I then decided to combine the probe mount with the wire cover.
Apogee Logo It can be printed in multi color eather in Bambu Lab studio, or in Cura by adding a pause in the layer tool, to shift filament. It can also be printed seperately and glued together. Will recommend printing the parts in one…
I needed a quick and easy way to mount my Apogee SQ-420 PAR meter onto something that could reach the bottom of my reef tank. Most of the pieces on the open market were either extremely expensive, or poor quality. I also disliked how most…
Key changes: Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. Works with Sprite Extruder SE that also mounts to the stock carriage.…
Remixed the Rapido hotend base to fit the TZ V6 2.0.
