Ender3 S1 SpriteBurner Backplate 4020 Fan 0 Y Offset and PTFE holder and Filament Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A custom backplate for ender 3 s1 sprite extruder that has all the goodies optional filament cutter.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 872
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A brand new design of a backplate for ender 3 s1 sprite extuder. Mainly designed to be used with my SpriteBurner cooling duct v2.
New update has a filament cutter for my hopefully upcoming multi filament build.
Uses a 4020 hotend cooling fan. Caution on fan polarity . The default cooling fan connectors had the connector reversed for me. Please check yours before wiring anything.

Compatible with various heights using the provided standard model and spacers. If you are using CHCB OT you can use CHCB versions directly instead , no spacer needed.
Can take a PTFE connector with 10mm thread for using reverse-bowden tubes.
If using with the SpriteBurner V2 cooling duct. Trim the middle screw connector leg on the 4020 fan.

Needed parts
You will need
2x M2.5mm brass insert for the backplate. (version without needing brass insert is also uploaded, use that if you dont have inserts)
2x M3 threaded insert for probe mount (version without needing brass insert is also uploaded, use that if you dont have inserts)
2x M3 bolts for the probe mount . length will vary for your hotend and the version you chose.
2xM3 Bolts for connecting 4020 fan. Length will vary based on manufacturer of fan
1xM3 nut
1x18mm Box Cutter Blade segment (only for filament cutter)
2x 10x2mm Neodymium Magnet Disc (only for filament cutter)
1 smooth rod or any type of nail for the lever fulcrum.
4020 fan is mounted with 1 top bolt with nut.
And bottom bolt is attached directly to extruder through the fan and back plate part. Marked blue

4020_CHCB_OT_COMPACT
This version is designed specially for CHCB-OT hotend, uses the extra space to move probe more towards nozzle to get a reduced X offset.
[bltouch]
x_offset: -50
y_offset: -0
4020_STANDARD
has both threaded insert and non threaded insert (nuts for probe mount and sized holes for backplate.)
[bltouch]
x_offset: -57
y_offset: -0
4020_CHCB_OT_Ultra_COMPACT & Ultra_COMPACT with Filament Cutter
This was an experiment but worked nice for me. If you are not ok with trimming the creality sensor try other backplates.
I rotated the probe 90 degree on place to get even more reduced X offset and was able to get it as low as 45
[bltouch]
x_offset: -45
y_offset: -0
In this version the probe is mounted in a semi exposed threaded insert. And also need to trim the wing of the mount on your CRTouch with some clippers.
WARNING: If not trimmed this will hit the gantry before X end stop button. You will need to trim the leg by a few mm to make this one work. Check image-

UPDATE New Filament Cutter.
For the cutter I went with using 2 magnets instead of a spring it gave more control also made the entire thing more compact. Got the idea of using magnet from magneto filament cutter.
The blade is from 18mm box cutter blade 1 or 2 segment (varies by model)
Blade holder:

Use a 10x2mm disc magnet with the blade holder to put the blade in place. if the blade is too loose you can shove some print shavings on the blade slot to make it tighter. I used ASA CF but recommend using something smoother for free movement.

The backplate has a slot for another 10x2mm magnet. Put it with opposite polarity of the one used on the blade holder. They should repel each other giving a springy feel to the blade piston asembly. Push it a couple time to make it move free.
Glue the magnet if its too lose.
Using magnet like this has added benefit of adjusting spring tension. I can add a thicker 10mm magnet or just put another 10x2 on top of this to increase tension!
The extra holes on top are there for optional brass insert (for future me) feel free to use or just leave them as is.
Lever assembly is pretty straight forward. I used a wood nail instead of a smooth rod. Use whatever you have. The nail is held in place by a spare piece of ptfe tube i had glued to place.

The lever base is attached with 2 m3 8mm and 1 m3 5mm bolts. Use spacer as needed

For printing the lever use 4/5 walls 10/20% infil. Important to make it strong.
As for the assembly that hammers the cutter lever is up to you. I have my ender 3 s1 inside an enclosure of ply wood bolted to brick wall so I have my hammer hit the wall. You might need something rigid or modify the lever.

