Liczymy pasujące modele…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…
A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.
Snatdard PC case backplate for server motherboard Supermicro X10SRH-CF.
Print with standard settings but my preference is that this is printed in ABS or ASA. with 50% infill. V2 is honestly better where it has a more stable and flat profile. if you prefer V1 then this is still an option. I would recommend…
Another version of "Electric toothbrush holder" from Josef Adamcik, adapted for holding toothpaste and improved to be detachable from the wall. The detachable backplate "prints in place" and is meant to be mounted with adhesive tape.…
Backplate for Sonicake VolWah pedal to attach to pedalboards using Velcro. I modeled it to use the original screws. I'm sharing this before they start charging a lot for a piece of plastic.
I wanted to upgrade the backplate fan and WIFI dongle for my QIDI Plus 4. I found a few nice backplates that could accommodate the 120mm fan, but there was nowhere to mount the significantly larger WIFI dongle I had, so I decided to…
Increased size quite a bit. It it tight on the back with the rubber and the screws pull it in. Start the 4 corner screws loosely, then tighten progressively. Print in PETG or PLA (if it will not be exposed to high heat like in a vehicle…
I was inspired by another model, but I drew it from scratch because it was without thermal bushings and was not aligned.
Backplate with switch cutout for the MeshNRW Heltec T114 Case
I found that the shuttle and backplate weren't mating properly once I added the pins and bushings, I reduced the height
*UPDATE - 18-02-26 V2 models added, depth increased to ensure clearance of adaptor board components *UPDATE - 23-05-26 please be aware support bar at the back wont fully close due to the larger battery area Back plate battery area…
Another version of "Electric toothbrush holder" from Josef Adamcik, improved to be detachable from the wall. Models available for one Phillips Sonicare and one happybrush toothbrush, or both of each. The detachable backplate "prints in…
A universal backplate mount for the Flybear Reborn 3 printer. Made of PETG plastic. The top part can be modified to accommodate any type of material; I designed it to hold a TPU spool. The tilt angle is adjustable. Standard M3 cage nuts…
Upgrade your budget FlySky FS-i6X into a fully capable ELRS radio! I designed this custom back cover to fit a Radiomaster ELRS Nano module and a 2S 18650 Li-ion battery pack . Combined with the OpenTX/EdgeTX mod for the FS-i6X, this turns…
This is a glueable clip-in backplate for the IKEA MITTLED lighting system. The design snaps into the original MITTLED mounting ring that comes with the product. You can use the original mount as an alignment template, clip in and then…
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
Slimmed down the flat part of the original design by about 30%, it cuts an hour off the print time.
I can't tell you how many countless of these knobs our kids have broken over the years because we have a heavy cast iron skillet that sits next to them and when the kids pull it off, they inevitably bump the knobs and they break. I've…
Magnetic Backplate for Shelly Blu Wall Switch 4 Just glue in some 5mm diameter magnets ( 5x2mm, 5x3mm, 5x4mm, 5x5mm should fit)
Traced from original plate that i happen to own. Test-fitted.
To make this successfully, you need a switching usb c charging board for 3.7 volt batteries (The one I have is 3A and I changed the resistor to 2A so it wouldn't overheat) and a 3.7 volt 5200mAh battery. place the charging board into the…
Retention backplate for the UCG-Fiber PSU rackmount found at CAD on OnShape
DISCLAIMER: This is a very rough, amateur remix. It is a "function over form" project with several fitment issues, but it works great for thermals. I modified the "Dual Fan version of BC-250 ATX CASE" to add about 50mm of extra width. My…
This Backplate gasket is made specifically for CV carburetors and is used between an air cleaner or backing plate and the Carburetor. These should be replaced when installing a new air cleaner. Print in TPU, brother.
I needed a back plate to mount my Icom IC-2730a to a Lido AMPs mount. The stock brackets seem exorbitantly high priced for what they are, so I decided to make my own. Just pay attention that the Lido mount is asymmetric, note the way the…
Backplate for Lenovo K800G2 (RD452x) motherboard. To mount it, unscrew the bolts from the VGA and COM-port connectors, place the plate and then screw it in in place. The source .scad file is included.
I needed a backplate to mount the Fysetc H36 Combo v2 to my Wristwatch G2 on my A4T. Ziptie Version This version only has a strain relief with zipties. You need two heatset inserts for mounting the H36 to the backplate and two zipties.…
Remix of the Backplate from https://www.printables.com/model/68643-vesa-100-quick-release to make it VESA 75 compatible
Printed in PETG. Use long 2m screws and 1mm thick double sided tape on the squares to provide the support necessary for it to stay in place. A printer with at least 170x170 bed area is required.
This is a remix of the weighted backplate design from aaextra44 on Thingiverse. I printed this in PA6-CF on my X1C and noticed the trigger would not function when the part was installed on the TX22. Through trial and error, I was able to…
SF bolt checked: E1 needed to be updated to make it work with the SF bolt, this can been seen by the SF mark, older versions with out this mark will not work with a SF bolt! E2 already was compatible with the SF bolt so it's the same file…
I made a set of replacement pieces for the LaserActive, but as they are all quite small detailed parts (and not to mention, awkward angles for FDM printing), it either requires a Resin printer, or you could order them through a shop like…
This small rugged phone has a nice rubber case built-in, but the fancy backplate is unfortunately glass. As expected it got spider web cracks in the first year and later chips of glass started to drop from it. So there was no other…
I have remixed the Backplate from SirCBO for the O11 Dynamic XL as his version is too long for the XL. I uploaded the original Design and a modified version where all holes are closed and a Hole for an HDMI Cable was created. Have fun.…
This is a backplate for the Mean Well power supply for the Ender 3 Pro, used to replace the fan with a 60x25mm fan. I used the Noctua NF-A6x25 FLX, for silent operation and direct 12V compatibility.
I couldn't find original backplate for my guitar so I designed and printed by myself. I've printed in grey because I'm out of black pla but i will paint it. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports:…
This is the backplate of a lamp I have that broke and could not find a replacement. In the very slim chance someone needs this it is printed with petg with no supports.
I needed a larger backplate for the Honeywell T6 thermostat. This backplate uses a smaller cover plate adapter.
This is simple and lightweight really helping to clean up the toolhead in coordination with BTT EBB36.
Slicer settings like BambuSlicer allow for “painting” which colors you want. You can just use the fill option to “paint” the backplate with the filament you want to use. Where not available you may be able to change filament by Z height…
This backplate was created to keep items from coming in contact with the exposed electronics while having a 15mm u.2 drive installed in the vertical orientation. If you use m3 standoffs you can keep the horizontal orientation as long as…
I remixed the spring dependent pieces to fix a 5.56x41.28 spring my local hardware store happened to carry.
Disclaimer: I ended up not printing it because I found a different solution to what I had planned. I attached the Fusion file with all the parameters so you can edit it to your needs. I am certain the dimensions are correct. I would be…
Use the short wedge to push the striker cylinder nub inwards, and the long wedge to push the nub downwards. The other part is used for reinstallation of the striker and backplate. See…
As Aqara U200 doesn't have 10mm diameter adapter, and especially for my EVVA 4KS deadbolt with hole for retainer - I had to model it by myself. Made few iterations before to gain perfect for my purposes. * By the way, it should also fit…
This model was used to put a backplate on a rambo 1.3a board (to prevent short circuits). Make sure to print the spacers too (forgot to add them in when I printed the first model)
A backplate to hold the stock or other compatible CPU cooler for an AM4 motherboard. This design is slightly stronger than the original on Thingiverse, as I made the pegs slightly larger and the hole slightly smaller. DO NOT tighten the…
10G server NICs are usually ugly green PCIe cards. Not a great fit for a gaming PC. But maybe you still want one for whatever reason. A backplate can easily fix this. This one is made for the Inter-Tech Argus ST-7211 and hides the ugly…
I bought a Supermicro SC505-203B with an A1SRI-2758F, and an E200 with a different board. Wanted to swap the boards between the cases, but the I/O plates don't align. One existed for the SC505-203B, but there wasn't one for the E200 so I…
Fixture for milling flats on a backplate for a k11-100 chuck. Jig helps to position the backplate in the vise at to the corrrect angle. 2 x 2 flats are needed to hold the chuck in the vise or to mount it on a rotary table.
Reupload of https://www.thingiverse.com/thing:4681860 made by j_conlan1970 @j_conlan1970, if you ever upload this on printables, let me know and I'll remove this upload.
Replacement Rear backplate for Anycubic Photon Printer Two versions. Vented Vented with hole for fan duct - https://www.thingiverse.com/thing:3013054 Designed in Fusion360 Category: 3D Printer Parts
Backplate for Trimui Model S / Powkiddy A66 with extended space for a 523450 Li-Po battery. WARNING : Opening, modifying your handheld may void your warranty. I will take no responsability if you break something. To do this mod you will…
Gives a firmer and more secure lok for speed sloth mag holders for use in bandolier setups (invrt, cloud9 etc...)
One of the drawers in our house (40 years old) would just fall down. the track backplate was shattered... designed, printed, installed... works great. Print Settings Printer Brand: FlashForge Printer: Finder **Rafts:** No Supports: No…
Slim and modular backplate for uConsole. Plastic material provides much needed boost to the Wi-Fi signal and would allow to hide extra radio components such as the 4G antennae inside the case. The backplate is modular so the parts can be…
The knob was hard to turn so I made a bigger one. The sign was hard to see so here's an angled back plate. I used 12mm x 3mm magnets instead. To keep it from sliding I put a thin layer of E6000 on the back. You can use silicone sealant,…
I added a sixth magnetic slot and a backplate to mount the Beehive to a metal wall/door/case etc. Just insert the magnets during the print process. I printed the wallbase at 103% for a perfect fit of the magnets. All credits to…
A Mounting Bracket to attach your Air Quality Monitor (AQM) to the wal l . I created two versions, one with screw holes around the perimeter and one without (to stick it to the wall). Designed to be used with this Air Quality Monitor -…
Hope you like my design for my Voron 0.2 Backplate without anything extra. Same Size then the original plate. ABS / 0.2mm
A 3D printed rigid smartphone case that is designed for its back to be changed so anybody could personalized the way they want. The print was made using PLA, however, other rigid materials, such us PETG may be more advisable to use.…
I like the new LCD holder from the MK4S as it's backplate gives some protection from the backside for the LCD. But I do not want to use the new also molded LCD cover as I want to have it in a special color and with my own text on it. So I…
Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…
Print this in 0.20 with 0 support and infill, make the walls as thick as required to ensure there is no gaps/infill. if the spring is too long/big slice some off the end. the spring design is 50mm so fingers crossed it fits most.
This is a backplate cover for a 1990s Ibanez S-series electric guitar. It has been successfully installed on such a guitar, however it may fit both other Ibanez S-series guitars sharing the same screw hole positions and dimensions, and…
Backplate / IO-Shield for MSI TRX40 PRO WiFi Motherboard
If you find my designs useful, please consider sending a tip I needed to install a XFX Radeon HD 5450 into a tower PC but the card originally came with a low profile/SFF bracket. The card also took up 2 slots as the VGA port was on a…
A backplate for Fender Strat with offset fender logo. I would reccommend printing with the logo facing down and then filling in the logo with permanent marker so as to make it nicer.
A basic backplate and a magsafe backplate for the KV4P project (https://kv4p.com/). Use a magsafe sticker like https://www.amazon.com/gp/product/B09DFB9733 for the magsafe backplate.
Base Backplate Vanilla This is the the dove tail backplate, Youll use it to cad Your own tool holders and organizers for the Peg board/Wall mount MODULA system. Included are 1x single backplate and 2x 3x 4x for larger tool holders. There…
I had a Prusa Mini Display that seems to be a different revision (despite label showing same model number) which has through hole components which results in solder points on the backplane. On my Day 1 Mini, there are no through hole…
Various backplates for ATLANTIS for MiSTer within Thin Mini-ITX or cases with standard ATX size IO zones. The tabs are connected with 6mm M3 bolts and nuts - rotate to fasten. See the user guide on our web page for further information.
I made a backplate for the original model. Enjoy the extra storagespace
I made a remix of the blank backplate for use with a Hard Kernel Odroid C4 board.
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
Modified one of Arcanazen's backplates https://www.thingiverse.com/thing:6542357 to go along side the battery cover i moded https://www.printables.com/model/1078106-legion-go-nvme-battery-cover-heat-sink added some spines for rigidity and…
After some of the screws coming lose with heavy repeated use, I wanted to try threaded inserts in the backplate to hopefully make it a bit more robust. I found this really helps the tension screw and allows you to add more tension then…
Mount IP camera on tripod. Backplate for Dahu IP camera with standard camera tripod thread (¼-20 UNC). I plan to add mounts for other IP cameras in the future
My first desighn (that i publish) :) was lookin every where for eva2.4 for ratrig vcore 3 with goliath watercooled hotend, didnt find:\. so did a little remix to the original eva 2.4. on the way remixed and added orbitool mount, and…
A brand new design of a backplate for ender 3 s1 sprite extuder. Mainly designed to be used with my SpriteBurner cooling duct v2. New update has a filament cutter for my hopefully upcoming multi filament build. Uses a 4020 hotend cooling…
Just add 4x M5 nuts and use 4x M5x20 screws (longer also possible). The tolerances for the nuts is very tight, I recommend to gently hammer them into position. I printed it with 4 walls and cross hedge infill (40%) which might be overkill…
This photo frame consists of three parts, the frame, the backplate and the stand. The frame is suggested to be printed by laying flat on the print bed. For 0.2 layer height, it takes around 8 hours to print. Assembling the frame is…
This is a remix of @Nick1 Ender 3 S1 Filament Cutter Backplate to use a 5015 Fan instead of a 5020 fan.
Designed for my setup of an ASRock B650i Lightning and an Asus TUF 4070Ti with the Spine in position 5. It should technically fit any setup in that position, but your mileage may vary. It isn't a perfect fit, but just enough that you can…
Simple back plate for a door knob in art deco style For best results print in resin or finish with filler and paint
Snatdard PC case backplate for server motherboard Supermicro X10SRH-CF.
https://cad.onshape.com/documents/8a5a9c1e25e2dd4079678661/w/4eb034519b12f242969be554/e/6ae7786b512ce77b647fc3be Onshape model above if you need to tweak tollerances or export in other formats
Made this model because I needed a replacement backplate for my Schecter C-1 Classic after having my original signed by a band. Schecter does not sell these so I was stuck. Ended up using the orignal and scanned it via flatbed, cleaned up…
The backplate of this Procar dreifachsteckdose was missing. So I designed a fitting backplate.
Print orientation: Standing upright with the flattened pegs on the bottom. Enable brim if needed. Glue to the back of the charger.
BTT filament sensor backplate with ears This backplate provides 2x M3 holes to mount the filament sensor whereever you want to. In my case, at the back right extrusion of my Voron 0.1. I printed it in eSUN ABS+ with 40% infill so with…
