Stealtchanger Stealthburner Backplate with screwed pins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Stealthchanger Stealthburner Toolhead Backplate but with screwed top pins, instead of glue.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 768
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Hi,
Since I had a lot of play in my Toolheads after a few toolchanges, I was wondering why. After checking I saw that the glue of the pins was very flexible and I did not like the glued version at all. I was wondering why nobody had the idea to screw the top pins also and so I played around a bit.
You can use M3x4 countersunk head screw to screw the upper pins. The 2 heat inserts for mounting the clockwork are moved backwards, so you will now need a M3x16 screw, which is still a bit long, but you wont see it, instead of the M3x10 (I think).
Happy printing!