1 / 5
Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system — zdjęcie 1
1 / 5

Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An alternative mounting plate for the new Unifi AP. To replace a lost/broken one/use as a spare for DIY projects.

Ocena
5 / 5
Polubienia
13
Pobrania
215
Wydruki
1
Wyświetlenia
640
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system.

1. Two original landing sizes - square 50x50mm and square 85.6x85.6mm. For M3 screws, for M4 you'll need to drill mount for head probably. You can use these mounting holes with other popular AP stand designs.

2. To unlock, you will have to slightly pull the secure latch like a lever towards the front side.

I printed in PETG without any support, orientation just as placed. 0.2mm layer will be enough. Recommended 5 walls with alternate extra walls, 100% fill.

I highly recommend calibrating your printer for the correct print sizes.

Have fun.

P.S. Magic numbers is -10, 110, 210 and 170.

Tagi