22 modeli
This is a stable desktop stand designed for the Ubiquiti U7 Pro XG access point. Compatible with any AP using the Flagship AP Replacement Mounting System (SKU: U-PRO-MP), up to approximately 206 mm in diameter. Updates in V2: Reduced size…
There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed screw hole. I use M3 bolts + nuts to attach the base plate to the wall mount arm. See pictures.There are 4 new screw holes,…
This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…
UFO-style stand for the Unifii U7 Pro XGS access point. Both standard and skeletonized designs. The design with cut-outs may help with airflow heat dissipation. I'm not sure if this will fit the other AP models, but it should be good for…
This is a rackmount that can be screwed onto the side of a Sophos XG / XGS 106/107 device. It will likely fit on a few of the other smaller variants too. It sits pretty close to the rack side, and thats for a reason - its made to work…
Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system. 1. Two original landing sizes - square 50x50mm and square 85.6x85.6mm. For M3 screws, for M4 you'll need to drill mount for head probably. You can use these mounting…
Desk or shelf stand for unifi u7 pro xg/xgs. The u7 pro xg is quite heavy, so this is designed with large sections to be stiff and not bend over time even if printed in pla/petg, and without using a lot of filament. The ap is mounted to…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Unifi U7 Pro XG/XGS overheats a lot on the wall. That's why I created this model. It has a distance from the wall, has holes for air flow. And it is possible to install a 60x60mm fan with a 50x50 mounting hole spacing. I modeled it after…
A mount for the Calix GP1101X XGS-PON ONT in the ESRack system by @EvilProphet, based on the dimensions in the datasheet (135mm x 135mm x 33mm), but not yet verified IRL. I don't have fiber service yet, but it's coming in a few months and…
V ČR osazuje tento modem T-mobile, zejména pro zákazníky mající zájem o připojení pomocí transparentní bridge. U modemu není řešeno uchycení na stěnu, doporučuji umístit větracími otvory ode zdi i když je počítáno s větrací mezerou při…
1U Rackmount for Zyxel XGS1250-12. Split design for small printers. BOM: 14x M2 heat-inserts 8x M2x25 (or longer) SHCS Screws 2x M2x16 (or longer) SHCS Screws 4x M2x10 (or M2x12) SHCS Screws You'll find a full assembly which shows how to…
Remix of the model by Exen to have less air gap for the smaller heatsink and make it compatible with PDC004 USB C board
Thanks to @Vaarlion_340250 for the Original Model.
supports on the build plate. PETG, 20% infill is fine. Needs assembly, 6 screws and square nuts M3x8
DIN rail mount for Comtrend GRG-4362 XGSPON ONT , used by CETIN in the Czech Republic. Three-part print: a spring-loaded DIN-rail clip plus two screw-on hooks for hanging the ONT.
This simple adapter ring is made to fit Unifi U7 Pro XG/XGS on a cool custom stand designed by @malind_211864 (stand model: https://www.printables.com/model/1641379-unifi-u7-pro-xgxgs-stand ) Ring does not have any lock, since it's a desk…
My Zyxel switch took too much room laying flat and I didn't want to put it on the wall, so I designed a basic stand. The switch is fixed with two flanged headed screws (screwed directly into the plastic, leaving a gap between the head and…
Designed for the UniFi Dream Wall Replacing your ISP’s ONT with an XGS-PON SFP+ stick in the UniFi Dream Wall works well, but the stick runs hot: the Dream Wall gives the SFP+ cage very little airflow. This shroud clips onto the exposed…
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Unifi U7 Pro XG/XGS overheats a lot on the wall. That's why I created this model. It has a distance from the wall, has holes for air flow. And it is possible to install a 60x60mm fan with a 50x50 mounting hole spacing. I modeled it after…
Thanks to @Vaarlion_340250 for the Original Model.
![Ubiquiti Unifi U7 Pro XGS UFO Stand [u7-pro-xgs]](https://media.printables.com/media/prints/8d294a2f-166c-4294-9164-afa97368111c/images/10724954_8c122fdc-1e08-413e-b4a4-2da95fec3088_a8464d49-d763-4f49-ae13-76a072856495/ubiquiti_unifi_u7-pro-xgs_ufo_stand_screenshot.png)
