1 / 4
Ubiquiti Unifi U7 Pro XGS UFO Stand [u7-pro-xgs]
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UFO-style stand for the Unifii U7 Pro XGS access point
- Ocena
- 4,5 / 5
- Polubienia
- 22
- Pobrania
- 328
- Wydruki
- 2
- Wyświetlenia
- 1528
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 5)Remiksy (0)Kolekcje (46)Powiązane
UFO-style stand for the Unifii U7 Pro XGS access point.
Both standard and skeletonized designs. The design with cut-outs may help with airflow heat dissipation.
I'm not sure if this will fit the other AP models, but it should be good for the U7 XG/XGS line.
Mounting hardware - I used 4 M3 x 6mm screws to tap directly into the print, which holds securely.
Printing:
- Material: PETG
- Layer Height: 0.20mm
- Infill: 15%
- Brim: Auto
- Filament Used: 22.68g
- Print Time: 1hr 34m