Liczymy pasujące modele…
This is a Jig to help you fix the FlexGate issue on Macbook Pro version 2016 and 2017. The new cable will be 4mm longer and there is a line to help with the cut at the right lenght. It is highly inspired from…
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
Wandhalterung für eine Makita 40 V Stichsäge, das Maß funktioniert mit der Schutzhülle auf dem Sägefuß. Ich habe eine Version mit einer kürzeren Aufnahme hinzugefügt, um den Weg für das Einstecken der Stichsäge von oben zu begrenzen.
Wydruk około 4,48 €–5,47 € nettoWstępna wycena jednego wariantu
Please Note: This Design is not being developed or maintained, and is now obsolete, please go for either the REDUX or the PRO DIY Steam Machine: REDUX DIY Steam Machine: PRO If anyone would like to support me and my work, please feel free…
A print-in-place puzzle box with a mysterious hexagon glyphs! https://youtu.be/MZP2tb3nzbc Customization The project comes in a multi-color and single-color variants. Both versions work the same way, the multicolor option just makes it…
Update: 27/10/2026 I have uploaded the version 4.2.3 face plates and the button bodies with the leaf spring system, I recommend printing the button body from a 60 to 70D TPU, if you have multi material system you can print the main part…
An unofficial 10-inch rack mount for the Ubiquiti Unifi UCG-Ultra | UCG-Max | UXG-Max. This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here . Updates 26 Nov 2024: The V2 of this rack mount…
I builded a 3D printer enclosure with the Ikea lack table. Finally I was not happy with the stability of the bottom one if you stack three Lack tables. So I have designed this angle bracket for improving the stability. For me it works…
A modular 19-inch rack mount for the Unifi UCG-Ultra, UXG-Max, and UCG-Max lineup. OBS.: The UCG-Max processor reaches 75~ 90 degrees Celsius for normal use, and the bottom can get REALLY HOT . So use filaments with higher temperature…
Update: 4/07/2026 Alert! PRO Version 2 Incoming: For anyone looking to build the PRO, please wait, I have Version 2 in coming, its fully complete, and much better than the first version, the case is now unified and supports…
Rackmount for UniFi Gateway Max (UXG-Max) . As the dimensions are identical, it will also work for the UniFi Cloud Gateway Ultra (UCG-Ultra) and the UniFi Cloud Gateway Max, but you won't see the display. Ports facing front, works for…
Update: 04/07/2026 Version 2 incoming, please hold off on printing this, the new one is better, I will be uploaded soon, I'm just short on time, but Ill try and get it up before the end of the weekend. Update: 27-03-2026 Ive added a…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…
Simple wall mount for the Unifi Gateway Lite (UXG Lite). You can face the ports either up or down, but not sideways. “-wide” has a wide hole pattern that has the same width as the old USG Gateway wall mount, making this wall mount a drop…
Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…
Use this stencil to create your pattern for the Duality HexGrid system. I created this model so you can have your pattern figured out before downloading the HexGrid system.
An unofficial wall mount for the Ubiquiti Unifi Cloud Gateway Ultra. It can be either screwed in place with two M4 screws or attached with a double-sided tape. It works for the UCG-Ultra | UCG-Max | UXG-Max. I've also shared the .step…
///////////////////////////////////////////////////////////////// Update: 2/10/2026 Uploaded files for the Thermalright 6.86" LCD Display Link to the product: https://link.amazon/B0j0CNDgn Link to the software setup for Bazzite:…
18/09/2025: I have some of these complete and ready to go on eBay if anyone is interested: eBay Listing Update 18/08/2025: Made some slight changes to the front case, giving the battery pack a little more room, approximately 1.5mm of…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d The Creality K1C is not a bad printer, and so far has been a pretty reliable work horse for the money, but…
This is a stable desktop stand designed for the Ubiquiti U7 Pro XG access point. Compatible with any AP using the Flagship AP Replacement Mounting System (SKU: U-PRO-MP), up to approximately 206 mm in diameter. Updates in V2: Reduced size…
Makita battery holder for four batteries. Works with 18V (LXT) batteries and 40V Max (XGT) batteries. A remix of Jerry's single holder. Supports only required from the built plate to support the joint tags. It can be done without supports…
I ordered the BexGears TL kit from Amazon (before price hikes) and ended up needing to update the Pruscaster model to make it work with the kit. Updates: Removed 5th Neck Hole Slightly Adjusted positioning of the Neck mounting holes…
Updated to V2 (Shown in CAD screenshot - pictures are the V1 design) - Changes include: Modified front with slightly thicker face/lip for increased rigidity Additional material creating a vent slot for fan intake and increased rigidity…
ROG Ally XG Mobile Cover remixed from https://www.thingiverse.com/thing:4906771
The Alpha-class XG-1 Star Wing is an imperial starfighter from Star Wars. It did not appear in any of the movies or shows. This is a replica at 1:270 scale with foldable, print-in-place wings. Its 37mm long and has a wingspan of 61.7mm.…
Im proud to release the version 1 of my universal chamber heater, the control system and power setup will be up to you, I will add these details later on the next version. BOM: 1 x 24v 7530 Dual Ball Bearing GDStime Blower Fan…
If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d 24/10/2025 I have had a few requests for a tray to suit a Raspberry Pi, the below image is what I have been working on,…
Makita battery holder with a secure fit. I designed it for a 2.5 Ah battery, as that’s the size I have. I’m not sure if it fits larger batteries. It prints without supports. V2 and V3 have flat sides for easier alignment or for aesthetic…
The dangling power brick of my fancy 10GBE switch annoyed me, so I designed a wall mount for it. Two countersunk screws are used to screw it into place. I added a version for the UniFi Lite 8 POE's slightly bigger power brick, so you…
There are 4 new screw holes, specifically for the U7 Pro XGS / XG. A sleeve was added to access the recessed screw hole. I use M3 bolts + nuts to attach the base plate to the wall mount arm. See pictures.There are 4 new screw holes,…
I made this specific for the BC250 Micro-Fit connectors, as there was no way to lock them into place, and this also stops you from mixing them up, so you can connect all 6 pins on each without worry about crossing them over. I made this…
This model barely fit in the mk3 bed size, and may be a bit flexible but having support under helped You will need 6 8mm m3 screw and 6 m3 square nuts to bolt the part together. The switch is meant to slide from the front, and be locked…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl Key Features: -Non-slipping 16mm clamps with TPU inlay -Rotatable in three…
///////////////////////////////////////////////////////////////// Update: 11/8/2026: I have created an assembly guide for this mount here: https://github.com/NexGen-3D-Printing/SteamMachine/discussions/72 If you have any questions, you…
Moved some parts from @marsf_1338819 and removed fillets to fit 1 more keystone Keystone are on the Right, but could make a Left version if requested. Should fit in any 10 inch rack that has at least 213mm inside spacing
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl This is part of my new SCROG system MXG_2 “The Hook” Features: - Integrated…
Update 11/10/2024: I will be uploading an updated version of this model this weekend (After I fully test everything), I have a new rear battery cover with a built in power switch, as the soft off for the V3 still chews power, and I have…
buy @Mauker a coffee ! https://ko-fi.com/A623L7G ☕ added versions with zero and one keystone. added version with vents also see my version with PoE adapter mount: https://www.printables.com/model/1215636
UPDATE Guitarv2.stl now has the Bridge and Pickups lowered by 12mm to fit the BexGears kit better. The 4 holes used to attach the neck are in totally different areas. PrusaCaster mod for BexGears Electric Guitar Kits…
There are two versions, the first version is standard and can be cut to fit smaller printers if needeed ( in slicer cut recommended ) The second version is modified to fit Bambu P1 and X1 or printers with the sane print volume without…
This is another version of the ROG Ally Z1/Z1E dock port cover (XGm port) with a snug fit so it doesn't accidentally fall out. There is some risk involved so make sure your printer has good calibration for an accurate fit. There are 2…
Detailed Description Bring your walls to life with this high-tech, modular lighting system. Designed for those who want to blend art with technology, these hexagon-shaped LED bars allow you to create your own unique geometric light…
UFO-style stand for the Unifii U7 Pro XGS access point. Both standard and skeletonized designs. The design with cut-outs may help with airflow heat dissipation. I'm not sure if this will fit the other AP models, but it should be good for…
The UXG lite does not come with any wall mounting options, so I remixed a wall mount based on an USG design. Print settings Print in the default orientation No supports needed Functional print, so use perimeters/walls and fill accordingly…
Solidworks files included.
Having always been a fan of the design of the Apple G5 case and always having boring generic cases I wanted to make something unique inspired by the G5 case. There are quite some parts to this build, so don't think about printing this…
The Idea I've always found myself needing shelving solutions that fit exactly the space and purpose I have in mind — not some fixed-size product from a store. The HexGrid Modular Shelf System was born from that frustration. The core idea…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi USW-Flex-XG. This mount is part of a 19-inch modular rack mount system I designed, you can mix and match the modules with other mounts. Take a look at my models here to find out…
Fits this kit as of May 2024: https://www.amazon.com/gp/product/B082ZG8FS7 These adjusted files better fit the neck and electronics box. Otherwise you'll have issues with both. Highly recommended you print the small 25g neck-fit test…
This is a rackmount that can be screwed onto the side of a Sophos XG / XGS 106/107 device. It will likely fit on a few of the other smaller variants too. It sits pretty close to the rack side, and thats for a reason - its made to work…
Remix of adrians design to be used with N scale, in my case Minitrix. Uses a M3 Nut and Screw. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: [ Generic PLA…
A 10-inch rack mount for the Ubiquiti Unifi USW-Flex-XG 10G switch. Add this sweet 10G switch to your 10-inch rack with this mount! This model is part of a series of 10-inch rack mounts I've designed. You can check out the others here .…
A mount for the Ubiquiti UniFi Switch Flex XG (USW-Flex-XG).
New version of this here: https://www.printables.com/model/1017019-nexgen3d-meshtastic-atak-heltec-t114-case-v2 Note: I have ordered in some Beofeng clips, so when they arrive I will redesign the back cover to support them, so if your…
Mount backplate for Ubiquiti Unifi U7 Pro XG or XGS APs Mounting system. 1. Two original landing sizes - square 50x50mm and square 85.6x85.6mm. For M3 screws, for M4 you'll need to drill mount for head probably. You can use these mounting…
Simple AIO hose management clip, I designed this to suit the Artic Freezer III but should be fine with others. I designed it to suit 13mm hosing as the Freezer has wires and nylon braiding over the 10mm hose, so I need them to have loose…
Desk or shelf stand for unifi u7 pro xg/xgs. The u7 pro xg is quite heavy, so this is designed with large sections to be stiff and not bend over time even if printed in pla/petg, and without using a lot of filament. The ap is mounted to…
Stealthburner printhead for Phaetus DropEffect XG hotend
Makita battery holder with a secure fit. I designed it for a 2.5 Ah battery, as that’s the size I have. I’m not sure if it fits larger batteries. It prints without supports. V2 and V3 have flat sides for easier alignment or for aesthetic…
This will probably fit other models with the smaller rack ears but you will need to verify that. I have included Fusion 360 file if needed.
27/09/2025: Had some clearance issues with the DXC extruder, so I made some slight tweaks and reuploaded the riser, the previous one is fine if you run the stock extruder. 26/09/2025: New and improved version of my K1/K1C Lid riser, I…
Just a simple buck converter case, has cable tie points, max size is 6mm x 2mm, requires 4 x M3x6mm SHS or BHS. Buck converter is the LM2596S. Thank you to LxL3D for the use of the LM2596S Dummy model, which I used to make this case,…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - no magnets needed, but u can isert some - add a fleece or whatever u want…
Top loading and slightly more structurally robust/rigid remix of Alex's model.
Update 2025: I just uploaded a Version 2 of these and the Step file if anyone wants to make changes to them. Update: Just added some alternative feet for those that would like to angle the speakers back, also added 2 mock-up 3D files so…
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
Remix of the middle piece with the following modification: Bridge holes: 3 holes for the model of the bride with 3 holes 24.75mm appart Aligned the bridge holes for the bridge to be centered (it was slightly off in the original model)…
Modeled with onshape, feel free to remix, link to my drawing is below. https://cad.onshape.com/documents/52dd3a7b840d64e9c8ea258c/w/a0fd00a7e60ab31e420b362e/e/53f1746f45fafb936a6825e7?renderMode=0&uiState=65be84c66471622ccbb0cf19
i suggest printing this in tpu with a 0.2mm nozzle, use variable layer height at quality preset for the best results, your minimum layer height can be 0.06mm or less.
Makita 40Vmax XGT track saw arbor dust cover, snag fit. I use PLA, should be ok with PTEG as well. It is not load bearing so feel free to use whatever quality to print. Support is needed for this version, but you dont need to remove it…
I took David's original model and modifed it by mirroring the side without the extra connection, ie just a 2x holder version. This suited my needs as I have a space where I can fit 2wide and several below, and wanted the softer edges on…
Revised version of my 3D Printer Chamber Heater: With my ongoing work on my NXG-3D3 printer, I wanted to add my chamber heater system, so I thought I would clean it up and make some changes to the original . This one does not require any…
If you like the model, I would appreciate if you leave a ❤ like. Rack Mount Bracket for UniFi UXG Max / UCG Ultra / UCG Max This bracket is designed specifically for the UniFi UXG Max / UCG Ultra / UCG Max gateway, offering a clean and…
Others have done this for the Bexgears kit already, but this is my version. Aligned bridge mount, deepened pickup cavity, adjusted neck holes, etc.
UPDATE 2026-01-10 Added 18 degree version
4020 fan housing for cooling XGSPON ONU Stick SFP+ (8311 WAS-110) rack mountable for UDM Pro/SE/MAX XGSPON ONU Stick SFP+ Link1 , Link2 Fan model: 4020 Requires support: Tree Slim What you see in the image was printed with Creality…
Simple stylish cover to hide cables on your 120mm fans inside your PC. Simple, print and install… I just use some support for the counter sunk holes, I print with the side that shows, facing down to get that nice PEI texture finish.
Bicycle chain tensioner and guide, helps to reduce chain bouncing on mountain bikes when hitting rough terrain. Upper part needs to be printed from TPUI, lower half and pulley should be printed from PETG-CF or ABS, in my case I used…
After buying K2 Pro and finding out that there is a ridiculous amount of stress placed on the stock couple being applied by the filament buffer and the CFS, I decided to fix the problem properly. I found someone had already started this…
This is a bit holder that fits the Makita XGT 40V max. drills DF001G/HP001G (U.S.: GFD01/GPH01). Holds 6 standard ¼" hex bits securely with 5x2mm magnets. Please read the following guide before printig. German version below. Hi! This bit…
I made a dongle to align a UniFi Building Bridge antenna using a commercial, off the shelf laser pointer. I used a cheap one from Amazon (< $10) and it worked great, but you could probably use almost any standard laser pointer. The one I…
This is a v1 of a model I made for SFF cases and the ASUS 10g networking card. It works great for me and the screw holes are a perfect size for the ones that unscrew from the metal full size bracket. Feel free to reach out if this model…
Please Note: This needs a printer with a 300mm x 220mm build area minimum, I designed it to take advatage of the K1 Max printer. Simple wall mounting system for the Surface Pro Tablet. I have tested this with the following tablets:…
Since I got a printer over a year ago I wanted to tackle this print. Outlaw Star is an amazing anime and is definitely worth checking out ( https://outlawstar.fandom.com/wiki/Outlaw_Star_(ship)#Gallery ). build notes- Mid-On the bottom…
If you like what I do here, come visit my (German) Discord or my Facebook group. Discord: MX-creations Facebook: 3D printed Grow Tools & Accesories - free .stl - v1.0 is used for coupling 100/125/150mm - v1.3 is used for coupling…
Halterung für den Xgimi Beamer Halo+ Als Schrauben habe ich M5x40mm schrauben verwendet und Gewindeeinsätze für den Lötkolben. Update 1.5.25: Uploaded STEP file
ROG Z13 got a big XGM slot. I not sure it come with any cover or not because i dont see one. so i made one. I Print it with TPU because it not easy to break . I scare any plastic break inside the slot so I suggest you print with TPU aswell.
Glove Box for Wallmounting / Box für Einmalhandschuhe Latex oder Nitril (Boxgröße wie beim Discounter, z.B. "Aldi") There is a discount store in Germany that sells these gloves for hygiene etc. This box fits in here. 2 variants, measure…
Here's the real horror, the reason you don't let Isolde get close. This isn't a beast she tamed; it's a warrior she made. This is what happens when she hits you with her Unwilling Transformation. It's some poor sod from a rival crew, his…
"The Connector" V1.3 – Upgrade This is the first major upgrade of my modular The Ring/Connentor connector system MXG_3 . Please use the original V1.0 page as the main reference for the basic system explanation, printing notes and general…
READ ME There are a few important considerations/tips/changes you'll have to make to accommodate the BexGears kit. This applies to both the original BexGears Prusacaster model as well as this remix: The BexGears bridge is ~6mm closer to…
Yet another custom Creality K1/K1C door handle. I felt like the original stock handle is ugly, but most of the designs floating around are either not really that different from the original, or sacrificing too much usability for…
Upgrade for: Strongsnap-MXG_1 This adapter is designed to fit 180mm fans like the SilverStone-Air Penetrator , but it's versatile enough to also work with 120mm, 140mm, and even 200mm fans . It comes with two spacers to ensure a snug fit…
All of the parts and instructions that are needed to mount the Phaetus APUS extruder and DropEffect XG hot end using the EVA 3 system. I printed all of the parts using ABS or carbon fiber glass filled filament.
No print support needed! For MGN12H Consider this experimental for now. it works but there is room for improvement, keep an eye on the bltouch. No issue so far with PLA and part cooling fan on at 100% Screw length (might be some small…
Brompton and trifold bicycle clamp spring parallelizer to hold the clamp plate in place print using TPU ease of print, print slow without support and brim
Unifi U7 Pro XG/XGS overheats a lot on the wall. That's why I created this model. It has a distance from the wall, has holes for air flow. And it is possible to install a 60x60mm fan with a 50x50 mounting hole spacing. I modeled it after…
a repaired file with no artifacting on the first layer
UXG-Lite mount with option for screws or screwless (using magnets). I found that some magnet holes were loose, and some fit the magnets snugly. So I made lots of holes to hopefully have enough working magnet slots that it will mount…
![[RE-REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max | 3 Keystones](https://media.printables.com/media/prints/adc6ccdc-6eff-4ddd-ac0f-4e95ccabe13a/images/9627747_37c38b0b-0449-4e4c-bd06-d9ab1999649f_1fc4f0c2-020e-40a5-b818-cb80370ed233/pxl_20250420_201749755.jpg)
![[REMIX] 10-inch Rack Mount for UniFi UXG Max | UniFi UCG-Ultra | UniFi UCG-Max w retaining screw](https://media.printables.com/media/prints/1215628/images/9122879_ee6d81c3-ef88-4d5a-ae83-562b8cf2c676_454d9de7-063b-42c7-91fd-92f32b565b2e/screenshot-2025-03-03-at-40157-pm.png)
![Ubiquiti Unifi U7 Pro XGS UFO Stand [u7-pro-xgs]](https://media.printables.com/media/prints/8d294a2f-166c-4294-9164-afa97368111c/images/10724954_8c122fdc-1e08-413e-b4a4-2da95fec3088_a8464d49-d763-4f49-ae13-76a072856495/ubiquiti_unifi_u7-pro-xgs_ufo_stand_screenshot.png)
