NexGen3D: Artic Freezer III AIO Hose Comb
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hose comb
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 199
- Wydruki
- 1
- Wyświetlenia
- 1139
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple AIO hose management clip, I designed this to suit the Artic Freezer III but should be fine with others.
I designed it to suit 13mm hosing as the Freezer has wires and nylon braiding over the 10mm hose, so I need them to have loose fit, its designed for the centre piece to be flexible so it can snap over the hose easily, then you insert the looking clip, also if you want, you can print the locking clip in a different colour if you want a accent to match your build.
If you need it smaller or larger, I suggest just adjusting the size in your slicer, should only take 10 to 15 minutes to print one and do a test fit.
Best to print in PETG, I used Matt White PETG-GF.