1 / 6
v2.0 MAKITA ROUTER PACKOUT INSERT (40V XGT & 18V) — zdjęcie 1
1 / 6

v2.0 MAKITA ROUTER PACKOUT INSERT (40V XGT & 18V)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Makita 40v XGT and 18v palm router insert . This model fits Milwaukees packet compact organizer.

Ocena
4,667 / 5
Polubienia
73
Pobrania
362
Wydruki
1
Wyświetlenia
4357
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

 There are two versions, the first version is standard and can be cut to fit smaller printers if needeed  ( in slicer cut recommended ) 

 

The second version is modified to fit Bambu P1 and X1 or printers with the sane print volume without cutting or support . Note  (This is the one I recommend if it fits in your printer ,the surface finish is better with this print orientation.)

 

 There is a tracksaw track compatible router base plate that fits in this packout insert fond here 

https://www.printables.com/model/964503-v20-makita-track-router-base-plate

 

Print settings recommend 

  Wall loops.  2 

   Infill. 

        5% to 10% ( I found 7% grid to be the best for the V2 1P  model )

   Filament. 

  PETG , PCTG , PLA*.              * pla may not be the best if the box will be in the sun.        ( heat reasons ) 

Other.  use only 4mm brim on V2 1P model to make it fit on the build plate. 

Tagi