v2.0 MAKITA ROUTER PACKOUT INSERT (40V XGT & 18V)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makita 40v XGT and 18v palm router insert . This model fits Milwaukees packet compact organizer.
- Rating
- 4.667 / 5
- Likes
- 73
- Downloads
- 359
- Makes
- 1
- Views
- 4,338
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
There are two versions, the first version is standard and can be cut to fit smaller printers if needeed ( in slicer cut recommended )
The second version is modified to fit Bambu P1 and X1 or printers with the sane print volume without cutting or support . Note (This is the one I recommend if it fits in your printer ,the surface finish is better with this print orientation.)
There is a tracksaw track compatible router base plate that fits in this packout insert fond here
https://www.printables.com/model/964503-v20-makita-track-router-base-plate
Print settings recommend
Wall loops. 2
Infill.
5% to 10% ( I found 7% grid to be the best for the V2 1P model )
Filament.
PETG , PCTG , PLA*. * pla may not be the best if the box will be in the sun. ( heat reasons )
Other. use only 4mm brim on V2 1P model to make it fit on the build plate.