TP-Link TL-SG1005D switch backplate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even…
- Ocena
- 1 / 5
- Polubienia
- 5
- Pobrania
- 130
- Wydruki
- 1
- Wyświetlenia
- 718
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Just a small backplate to secure the switch in place. You can use double-sided tape, a single 3x16mm screw or even cable ties.
I was originally going to mount on the underside of my desk but after printing figured I could just zip tie it to the leg of the desk. Despite looking fragile, it seems to hold up very well, without the pins breaking. You might just need to sand them a little bit depending on how your printer handled the last few layers
If you are looking to use it for something else, the holes should be spaced by 13cm, and about 5mm deep.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2mm
Infill:
10
Filament:
Prusament PLA
Notes:
Use 4 perimeters so the pins are solid and strong.
Category: Organization