Prusa MK2/S Hotend fan adapter for 4020/4010 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotend fan adapter to upgrade from 30mm fan to 40mm. Including extra support from nozzle. See description.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 151
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this fan adapter to upgrade from loud 30mm standard fan to a bigger 40mm one.
Adapter has a hole at the bottom of 40mm fan flange for M3 bolt to thread into if you choose to use the included modified fan nozzle to add extra support.
When attaching adapter to the extruder housing space is pretty tight for the screws so I suggest you use threaded pins and nuts to make tightening easier.
I didn't have any pins laying around so I just left one bolt out and it felt sturdy even without the extra support from fan nozzle.
Filament: PETG
Layer: 0,2 mm
Infill: 20%
Perimeters: 4
Other:
- Adapter: Print with 40mm flange facing the bed and use tree supports under 30mm flange and inside the pipe.
- Fan nozzle: Supports under the arm.