1 / 7
Ender 3 4020 Fan Shroud Diverter (V2)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mod to optimize airflow for the Ender 3 using a 4020 fan and the stock hot-end shroud.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
- Drill holes all the way through the fan shroud in the threaded nuts where the stock fan mounted with a 1/8" drill bit (see pictures).
- Install M3 heat-set insets on the side that faces the hot-end. (I used 10mm long inserts)
Printed the V1 version in the pictures with a generic brand of black ASA.
