Ender 3 V3 SE cooler mod with 5015 and 4010 / 4020 fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cooler mod for the Ender 3 V3 SE. It uses a 5015 and either a 4010 or a 4020 fan.
- Ocena
- 4,667 / 5
- Polubienia
- 28
- Pobrania
- 169
- Wydruki
- 3
- Wyświetlenia
- 791
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Revisions
v3: Has a more directed airflow and mounting holes for a BTT AXDL345 module. Allover better design.
v2: More robust mount system.
Features
While there are multiple pretty good cooling mods out there I missed one with all the features I want in one sturdy mount. This has been tested and is in daily use, hasn't failed me a single time.
Cooling
Hotend: 4010 _or_ 4020 fan
Part: 5015 fan for cooling from 3 sides (note: the intake faces away from the toolhead to attract cooler air)
Very small and light to minimize vibration added to the machine
Mounts on the toolhead with older and newer extruder motors
Note: I have printed a bunch of overhang and other print tests with this mod and they all came out almost flawless. I really am happy how much difference this made for me.
Needed for mounting
4 * M3x20 for the 4020 fan _or_ 4 * M3x10 for the 4010 fan
2 * M3x20 for the 5015 fan
2 * the original screw for the side mounting of the mod
Mounting the mod
Note: The screwholes are not threaded and are designed to be 2.8mm. This will make the M3's dig in. When mounting don't overdo it, thight is thight enough.
Screw in the original screw intothe hole with the countersink on the right side
Add 5015 to the mod and screw in the M3x20's
Add the 40xx and the mounting screws of your choice
Printing
Orientation: Just as is
Supports: Yes. Support on build plate only. I used organic/tree support.
Layer height: 0.2mm
Walls: 2
Infill: minimum of 10%. It doesn't really make a lot of difference as this has very little infills.
I printed it in PETG (235c tool, 80c bed) and it worked like a charm. Print time was around 2 hours.
Inspiration
I used a lot of the already available 5015 mounts that are available on here. Here are the ones I used for some time and inspired me for my own creation: