Wyniki wyszukiwania: 5015

5015 Fan Nozzle Adapter

Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.

5015 Fan Swivel Mount

This simple fan mount attaches a 5015 blower fan to 2020 or 1515 extrusion frame. I prioritized making the whole assembly thin and compact while still allowing the fan to swivel (nearly) 360 degrees. You can use this model to improve…

Zero Y-Offset + 5015 Fan Backplate for Sprite Pro (With PTFE coupler)

Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…

Cooling fan 5015 intake with cone entry for delta P duct v2r22

This a new 5015 intake for the delta P duct v2r22 addon with a cone airflow entry. Did not like like the existing ones very much so I made this. On a bench test the inside cone improves cooling airflow by 3-8% (depending on cooler speed).…

Chimera piggyback 5015 part cooler

This is a part cooler for the E3d Chimera or Chimera+ hotend. It clamps between the heatsink and the fan. Separate versions are provided for the Chimera and the Chimera+, as they have slightly different dimensions. I only have the…

Simple E3Dv6 piggyback 5015 part cooler

Most 5015 part coolers are for a specific printer's carriage. This one simply piggybacks on the 30mm fan of an E3Dv6. In the second picture above, you will see 2 of these printed with the exact same settings. One with this installed and…

5015 Rapido UHF BL Touch Mount - Ender 3 Lightweight DD Overhaul & Linear Rail

A modified left mount that fits the BLTouch/probe on the inside of the mount. This reduces the distance from the nozzle, decreasing the x/y runoff needed to probe the whole bed. x_offset: -20 y_offset: -17

Modix Big60 Griffin Hotend 5015 Fan Upgrade/Adapter

There was an incident and three of the fan blades off of the original cooling fan were broken off. I didn't have an OEM replacement fan, and while I could order one and get it in a couple of days, I was also not a fan (pardon the pun) of…

5015 & 5020 duct for k1 with k2 plus hotend

In the second version I removed the ugly step :)

5015 Fan Rattle Killer (with cable hole)

A simple clip for 5015 blower style fans that limits / completely removes vibration and rattle. This remix also includes a hole for cable management as I needed to run the wires along the side. This did work for me with my fans but your…

Aperture Science 5015 cover

A remix of a 5015 Blower Fan Cover with a Aperture Science Logo, the original being made by BaGooN

Kobra 2 Max Print Head Upgrade Fan 5015 (Heatbreak/Cooling) Include LED Banner

The headprint was improved from last project as https://www.printables.com/model/1015224-xxx-3-fans-print-head-for-anycubic-kobra-2-series By 1. To change position of Model attached to Heat Sink that easily more last model 2. To add LED…

Elegoo Neptune 4: Optical Filament Runout Sensor Mount for SilencedFrost SF 3x5015 Neptune 4 Fan Mod Shroud - ECAS04 fitting

Credits: All credit goes to SilencedFrost , who has provided incredible add-ons for Neptune 4 printers. I just took this incredibel work and adapted it to my preferences. This custom mount integrates the optical filament runout sensor by…

3x5015 volcano fan duct for neptune 3 pro/plus/max (fly adxl345, cartographer)

Default model (stock probe) -- the probe position remains the same as in stock ; no offset correction is required. BOM : Default model (stock probe): heatbreak fan: 1xM2 16mm bolt + printed heatbreak fan-16mm-bolt-mount model fans: 2xM3…

NF-Wind 5015 Fan & 8mm Inductive Probe Mount

Bracket designed to allow for mounting of 5015 fan and 8mm inductive probe to NF-Wind (or clone of thereof) extruder. Mounting height is optimised for use with TriangleLab CHC Pro. 5015 fan to be mounted via 3mm screws with heat-set…

Ender 3 V3 SE cooler mod with 5015 and 4010 / 4020 fan

Revisions v3 : Has a more directed airflow and mounting holes for a BTT AXDL345 module. Allover better design. v2 : More robust mount system. Features While there are multiple pretty good cooling mods out there I missed one with all the…

Remixed 5015 Blower Duct for Original Cover of Ender 3 V3 SE

You will need to use other, slightly longer screws.

5015 fan motor stepper Ender 3 S1

ABS

Print Head Cover With 5015 Blower Fan Duct

Sceoan Windstorm S1 dual 5015 blowers

After faffing around with the original fan and a variety of fan ducts to fit the original fan I ended up designing a whole new hotend cover to utilise two 5015 fans that I had knocking around from my now redundant ender 3. Pros: Insane…

Remixed Chiron Dual 5015 fan Volcano MGN12H

Wanna's Chiron Dual 5015 fan Volcano remixed for use with MGN12H linear rails. It was made to pair with the FYSETC 3D Printer All Metal E3 V6 Volcan Dragonfy adapter that was originally meant to mount the Chiron hotend to the standard…

Dual 5015 ducting for Snippi-Me (Mini-Me for Spider V3)

Press fit and/or glue the dual 5015 fans into the shroud. Requires only the M3 screws you would use to mount the heat break fan.

Reinforced Elegoo Centauri Carbon 5015 Fan Adapter

I printed the original model but struggled with the strength of the mounting arm for the fan (due to poor layer adhesion on my end). I kept the same base plate design but made new mounting arms that now sit behind the fan and also utilize…

K3D Sprite Dual 5015 volcano

A little comparison, the red model is the original one I printed out a year ago. I shifted the nozzles so that they were in the center of the nozzle. I made the walls thicker I made holes for thermal inserts Redesigned the planes for fans…

Voron 2.4 Under-bed Chamber Heater 5015 Blower Fan Mounts

Mounts for 5015 blowers for Voron 2.4 350mm bed printer with kinematic bed mounts installed. Without the kinematic bed mounts, there probably isn't enough clearance under the bed, so either use a lower fan tilt angle or a different mount…

Evantis 5015(M) Goliath Orbiter 2 Hotend Mount

Evantis 5015(M) Goliath Orbiter 2 Hotend Mount. The Goliath Mount in the files didn't line up with the Orbiter 2/2.5 holes so i moved them in a little bit. If you're feeling generous: https://buymeacoffee.com/lascius3d

5015 fan duct remix for Tronxy XY 2 pro

I hope I helped someone because I couldn't find any 5015 fan duct for Tronxy XY 2 pro. layer height 0.2; infill better more than 25%; in your printer bad at overhang(like mine) i recomend to cut model at 5.10mm or 25 layer and use…

Prusa XL 5015 Fan Mod / EASY MOD V2 (Project Mastodon)

Things you have to buy : 5015 FAN (MX Research) or any other 5V 3PIN 5015 fan. I got mine from Amazon . Connecter (you also can take it from the stock fan) I recommend to print it in PC-CF, Nylon or at least ASA. For printing the 5015…

strongerst cover Ender 3 V3 SE Single 5015 Fan by nora

strongerst cover Ender 3 V3 SE Single 5015 Fan by nora

Dual 5015 Fan Duct with BL Touch and Laser Mount

I love this fan duct, made originally by Eric Anastas, but with a Ender 3 V2 edition by Alex Krush. But when I purchased a laser, I was struggling to get it to mount under my direct drive extruder. Many of the other mounting options did…

Remix for 5015 with a smaller air outlet

I slightly redesigned the model for my creality HI fan, maybe it will be useful to someone.

Ender 3 V3 SE Silent Cooling Upgrade – Noctua + 5015 Fan

Hello, here is my small tutorial on how to assemble this new printer head Everything you need: 2x Connector JST 1,25mm 3x M3 x 6mm Countersunk Head 2x M3 x 25mm Countersunk Head 4x M3 x 20mm Hex Socket Head Sunon 5015 fan 24V (this is the…

ldo kraken 5015 motor cooler

picture of screen is with one installed and one not installed to show effectiveness. made for the ldo kraken motors. 2x m4 heat inserts and screws needed

Creality K1C/K1MAX silent covers 5015 Fan

Захотел поменять вентилятор системы охлаждения на 5015, пересмотрел все варианты в сети не нашел ничего, что было бы функциональным и эстетичным одновременно. Я взял за основу модель Stanislau Shchahliak и полностью переработал дизайн и…

Ender 3 V3 corexz toolhead with 5015 blower fan

This is a remixed and modified toolhead design for the Ender 3 V3 CoreXZ, optimized for a 5015 blower fan upgrade. I couldn’t find a ready-to-use solution that fully matched my needs, so I combined and redesigned parts from existing…

Biqu B1 Dual 5015 fan duct (Improvement)

Must be printed in PETG as a base minimum ABS/ASA or Nylon Carbon preferable Be careful when installing the cables/fans in order not to short the board There is no need running these at 100% (Only 20% is enough for the most job)

Ender 3 5015 Micro Swiss

Simple single piece fan shroud for ender 3. Designed to be printed without support material. If you only print with pla the fan shroud can be printed in pla. If you have an enclosure I recommend to print it in petg or abs. Fits with the…

Ender 3 S1 part cooling fan duct - for 5015 Fan - clear view of the 1st layer

Edit: I made a version for two 4020 fans. You can have a look here: https://www.printables.com/model/1118528-ender-sprite-extruder-air-duct-dual-4020-fan-ender With most cooling duct, the problem is that you cannot see the nozzles and…

Simple 5015 Fan Mount

This simple fan mount attaches a 5015 blower fan to 2020 or 1515 extrusion frame. I prioritized making the whole assembly thin while still allowing multiple fan orientations. You can use this model to improve airflow anywhere you like. It…

HEPA Filter Mount for 5015 Fan

This project combines a 5015 blower fan and a HEPA filter normally used with robot vacuums and mounts to 2020 extrusion. The single fan version uses a filter that has been cut in half, and the double fan uses a whole filter. The filter…

Ender 3 S1 DUAL 5015 Fan - Y 0 offset

Edit: I made a version for two 4020 fans. You can have a look here: https://www.printables.com/model/1118528-ender-sprite-extruder-air-duct-dual-4020-fan-ender Edit - Due to several requests, I modified and added the version where the BL…

5015 blower rotatable fan cover with handle

I use this to seal the auxiliary part cooling fans installed on my printer enclosure when printing in ASA/ABS. When I wish to print in PLA (or another low-temp material) I simply grab the handle and swing the cover down to un-obstruct the…

EVA 2.4 5015 blower mounted side ways at rear of Y carriage

All the parts for the carriage these are to suit the Biqu H2V2 in one of my other models. I modded the top to remove the limit stop “Extruder_X_Limit_Top_MGN12 MOD”

5015 Fan Blower Mount - Ender 3 V3 SE

This replaces the stock 4010 Fan with a 5015 Blower. Pushes more air, but be advised, noise level will increase. You'll need (2) M3x20 Flatheads with Nuts to mount the Fan and (2) M3x20 Pan Heads to mount the Shroud. Fans I used:…

Sprite Extruder 0 Y Offset and 5015 hotend fan Remix

This back plate had 2 remixes so I merge two of them. Best of two worlds right. This one having a trim from the Cr-Touch mount and reinforced mounting point.

Neptune 4 / Pro 3x 5015 fan Printhead - Threaded Inserts + More

Features: M3 threaded Inserts (ADXL spacing 15mm) Improved the heatbreak duct curvature for better airflow. Improved heat-break fan fitment + fan alignment (new). Improved LED PCB clearance/fitment Reinforced mounting lugs Hex Key access…

Bentobox v2.0 5015 Pull Vertical orientation for Creality K1/K1C

This is another remix of Bentobox, but this version using 2x5015 fans to fit on Creality K1. The original version of Bentobox uses 2x4020 axial fan. This fan don't have much static pressure to move air through the filters. Radials fans…

Ender 3 v3 SE 5015 blower fan ducts with g-sensor mount

Combination of duct and g-sensor mount

ULTRA EFFICIENT DUAL 5015 FAN DUCT FOR ELEGOO NEPTUNE 3 PRO/PLUS/MAX

Full Credit to makss70 for creating an incredible design This is a remix of the original model. The original model was great but lacked some holes for mounting which caused me to have problems installing it, so I fixed it to make it one…

Ender 3 S1/Pro/Plus Sprite hotend fan 5015 - stock CRTouch

Version Slim y mejorada

Support ventilo 5015 pour FLSUN SR

Permet de mieux refroidir le filament sans necessité de les pousser à 100%, 70% suffit amplement. Vis (x4) et cylindres (x2) imprimés en 0,12mm d'epaisseur, avec jupes. Les platines en 0,20mm, sans support (mettre à plat sur le plateau,…

Creality K1 Max Toolhead 5015 Fan Cover

This toolhead cover allows to install a 5015 fan on Creality K1/K1 Max, greatly reducing noise and vibrations compared to a stock fan. Personally I use Sunon MagLev MF5015VX-1L01C-S99 DC 24v 4-pins fan. You will need JST 1.25 4pin…

Ender 3 v3 SE dual 5015 fan ducts

Let me introduce my own project, it was created to eliminate cheap 5015 fan rattling problem mounted perpendicular when X-axis move. To solve that I place both fans parallel to X-axis, also move it ale the way up that they can take cold…

Ender 3 V2 - HGX Lite Extruder - TZ E3 Hotend - Satsana - 5015 - BL Touch

This is my current setup for my Ender 3 V2. It has: TZ E3 hotend HGX Lite extruder Satana shroud 5015 fan BL touch I designed the Extruder mount/adapter plate and modified the Satsana to fit the TZ hotend Category: 3D Printer Extruders

Ender 3 v3 se upgrade to 40mm and 5015 fans +KE hotend option

This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…

Kingroon KLP1 230 fan duct mod for 5015 fan

Kingroon KLP1 230 fan duct mod for 5015 fan Print without supports

5015 Fan Nozzle Adapter

Adapter for 5015 5V fan to round pipe. Sized for 10mm ID PVC piping. Epoxy or glue in place Decrease layer height for better quality. Print nozzle facing down to eliminate support requirements.

Ender 3 v2 Neo Dual 5015 spider hotend shroud

I upgraded my hotend for my Ender 3 v2 neo, but the cooling wasn't good enough to keep up with the newer print speed (I use klipper). I was running the Neo Solo shroud (before the hotend upgrade), and its excellent. However, I needed a…

Ender 3 v3 dual 5015 fan

Due to the thermal stress on the parts, I recommend the pet-g material. For better printing, I recommend cutting the model into two pieces in a slicer

ENDER3V2 / S1 SPRITE UPGRADE DUAL 5015 FAN MOD

I installed this setup on my S1 it is a GREAT MOD! I went to put it on my v2 sprite upgrade and realized it wasn't going to work so I added the endstop mount . You can use this on a S1 as well i made the parts a little thicker and…

Ankermake M5C 5015 Fans Holder

If you've printed the " AnkerMake M5C part cooling fans upgrade " you can use this to stabilize your fans. https://www.printables.com/model/607759-ankermake-m5c-part-cooling-fans-upgrade Uses friction fit on the top fan screw hole and…

5015 Parts Fan for Sprite Extruder with E3D REVO (Reindeer Shroud)

Two versions, one uses 2 screws to mount like the original. The second version uses 3 screws to mount to the motor. The CRTouch fits in the original location with this fan duct mounted. From the original designer: "My take on the 5015 fan…

Ender 3 V3 KE Modular Dual 5015 Fan Mount - KeModBurner

The KeModBurner is an alternative extruder cover and fan mount for the Ender 3 V3 KE. KeModBurner Features Inspired by alternative extruder covers and fan mounts like the FatBurner (…

Ender 3 Neo Dual Duct 5015 Blower Fan

Values: Filament: Any Quality (Layer Height): 0.2mm Wall Loops: 3-4 Infill: 15% or more Infill pattern: It doesn't matter (I used gyroid) Supports: As shown in pictures.

Adjustable 5015 Fan Mount

Adjustable 5015 Fan Mount using M3 hex nut and M3 bolt. You can then use a 3 mm screw to mount the 3d print to some surface.

Ender 3 Pro 5015 Sprite Pro Fan Shroud

Minimalist style Ender 3 S1 5015 part cooling and 2510 hotend fan duct with easy to install magnetic mount made by Maxim

5015 fan & 8mm camera mount (Sprite Extruder)

This mount contains 3 parts: main mounting plate: screws onto the stepper motor using original screws of the 4010 blower fan fan mount: to mount a 5015 blower fan. Requires additional M3x20 screw. Slides into the main mounting plate…

Neptune 3 pro volcano 5015

Printhead shell for Elegoo neptune 3 pro (mb others if fits) with volcano hotend and 5015 fans.

Mammoth - Dual 5015 Part Cooling for CHC Pro and E3D V6

Lightweight parts cooling system with two powerful 5015 radial fans and E3D radiator mount. The ducts provides excellent layer cooling for high flow printing and ability to print steep overhangs and long bridges. CHC/CHC Pro and V6…

Neptune logo front cover - Hero Me Gen 7 Neptune 3 Pro/Plus/Max Dual 5015 Cooling Shroud

Front cover for Hero Me Gen7 part cooling for Neptune 3 Pro/Plus/Max shroud. Replace stock fans with dual 5015s. I got an idea of putting astronomical symbol of neptun into it. So, there it goes.

NSK UltraLight Effector for Rapido UHF and 5015 Fans (BOWDEN)

NSK UltraLight Effector for Rapido UHF and 5015 Fans (BOWDEN)

E3DV6 compatible Anycubic i3 Mega hotend housing endstop / sideplate with integrated 5015 Fan Duct (slightly adjustable)

Getting fed up of having to use multiple parts that kept falling off or were ill fitting, I integrated a 5015 fan holder and fan duct into this tinkercad abomination. Cooling function is slightly better than stock. Height is tuned for a…

5015 snap in fan duct for E3D V6 on Anycubic i3 mega

Shortened version of snap-in 5015 fan duct to fit with E3D V6 or clone (if used without spacer). Also improved airflow and printability of the part by adding some corners. Can be printed with no support (some overhang failure but came out…

5015 Fan Swivel Mount

This simple fan mount attaches a 5015 blower fan to 2020 or 1515 extrusion frame. I prioritized making the whole assembly thin and compact while still allowing the fan to swivel (nearly) 360 degrees. You can use this model to improve…

7530 to 5015 Fan adapter

Wanted to see how a 7530 fan would effect my print. At 100% my E3d Chimera+ cannot get above 190C. So suffice to say it works really good. I probably need to adjust the aim of my part cooler, but this Thing does what it needs to do. The…

ELEGOO NEPTUNE 3 PRO PLUS MAX DUAL 5015 FAN UPGRADE "THE PINCER"

This upgraded cooling system is not only one of the lightest options available for the N3 Pro but also optimizes airflow, directing it precisely where it’s needed—right at the material, not the heat block—while fully leveraging the larger…

5015 Double Trouble Kobra 2 Adapter

This simple project allows to use 5015 blower fans in @ DrewDeeDoo 's Kobra 2 Dual Fan Duct (Double Trouble) ( https://www.printables.com/model/787261-anycubic-kobra-2-dual-fan-duct-double-trouble ).

5015 mount with stabilizer

print it upside down with supports only on build plate. ABS is recommended

5015 heatbreak fan adapter for Neptune 3 Pro/Plus/Max

Update 1.1 – print optimization and minor fixes You'll need 2xM2 6mm bolts for duct and 1xM2 16mm bolt for fan mount. Designed for Sunon fans, Younuon fans also fit fine. Fan should be installed at a 10° angle (see last picture) and…

Endoscope mount for SF 3x5015 Neptune 4 fan mod shorund

Small parametric bracket for holding an endoscope camera The base model was made for a cheap aliexpress one with a diameter of 7.2mm, but you can change that slightly in the model with a maxium of 8mm same goes for the offset from the fan…

Creality Sprite Extruder Pro 5015 part cooling fan mod

Replace the stock fan with a more powerful 5015 blower. Use the same mounting and screws from the stock fan. You'll need an M4x25 mm screw to mount the 5015 fan. Print using ASA (I suggest 0.2 mm layer height, 5 walls, 10 top and bottom…

Radial Fanduct for Original Housing 5015

Impresso com PETG. Com suporte para contato com mesa de impressão. Deitado de lado. all credits Ixylon3D

fan 5015 flsun v400 chc

aimant 6*3

KP3S — Modular 5015 Fan Shroud — [STOCK] CPAP TUBE 15mm — Kingroon

Fan shroud for 15mm CPAP hose. You need to cut the rubber end off the CPAP hose and connect the raw hose directly to the inlet. Added custom beam and clamp to help secure the CPAP hose. Use 2x 6mm M3 screw to secure the clamp to the beam.…

Ender 3 Neo 5015 Fan Duct

Update: 9 March 2025 (v1.1) I just reduced the thickness of the attachment part for the nut and bolt so that the bolt head does not interfere with the hotend fan. --- This fan duct is for a 5015 blower which uses the original mounting…

Sprite 5015 part cooling

Cool your parts with a more effective 5015 fan instead of 4010!

Anycubic Chiron Dual 5015 fan /V6 volcano

design for fun and no cable holder

Mellow Fly ADXL345 Mount for Evantis 5015(S) Toolhead (UHF)

Version 1: Added two mounting holes to support a Mellow Fly ADXL345 USB. BOM: M3 screws x2. M3 Washers x2 (Optional) Credit: Sir_Wash

5015 Bento Trident base

little stronger mounting and a hole for a chamber temp thermistor. Used a pair of wagos to connect the fans.

artillery genius sidewinder fan duct 2 x 5015

improve air flow over the output.

Ender 6 5015 fan shroud

IMPORTANT: -Turn on Print Thin Walls in your slicer (just for the fins inside the duct). -Make sure you set up the supports so you can get them out easily. For the duct, best to either manually add the supports or block generation near…

5015 Toolhead KLP1 230

This is just a new toolhead cover I designed for use with a 5015 fan for KLP1 230. No supports 2 M3 screws 2 heatstake brass inserts 5015 fan If you are using the THR board you will need to cut and splice the original fan wire to connect…

Ender 5 NF-Crazy Plus - DirectDrive, BMG, BLTouch, Dual 5015 Blower Fans Cooling Duct Mounts

This is a custom cooling solution for an NF-Crazy Plus hotend on an Ender 5 Pro. The NF-Crazy Plus is a Mosquito clone that is wider than the original Mosquito, but also mounts using the stock Creality mounting solution rather than the…

Ender 3 S1/ S1 Pro Extruder Upgrade: 5015 layer fan + 3010 HS fan + V6 hblock (Optional) + all other adapted parts needed

This MOD replaces the stock 4010 fan with a 5015 layer fan,a 3010 for heatsink cooling and an optimized fan duct. 5015 Fan improves air flow and air volume. It's adjustable in height. 3010 fan, replaces the crappy and noisy one that needs…

Microswiss NG Revo 5015 fan with EZABL mount

its a remix of the Microswiss mount for the NG Revo edition that uses an EZABL

FatterBurner - Ender 3 v3 SE Dual 5015 fan cooling shroud

I really liked the fatburner so I modified it to fit on SE model. You can follow along the tutorial on the original design since fatmax did a great job with photos and descriptions. You will need 3 longer m3 screws to fit trough base and…

Compound 5015

For remote cooling solutions This will not increase the fluid flow rate but will increase the static pressure this system will be able to produce. Compatible with 5015 silencer Installation You will need: Appropiatly sized screws in…

Bracket for a 5015 blower for FLSUN SR Sherpa/Orbiter Housing heat sink

i added a bracket for a 5015 blower fan for the heat sink, because i got heat creaps from time to time. this solves the problem for me. For this housing: https://www.printables.com/model/271144-flsun-sr-sherpaorbiter-housing

Dual 5015 Fan Shroud for Micro Swiss NG

Its kinda ugly and there really isn't a clean way to deal with the wires but it works. It's a modification of the original design from Micro Swiss. I've personally been using one printed in matte PLA for almost 2 years now and haven't had…

Nautilus v2 for K1 heater 5015

5015 blower fan upgrade for sovol sv06 upgraded using heater from Creality K1. Design is not perfect, but it does the job. Kudos to original creator.