1 / 1
Hemera (and XS) 5015 Parts Cooling Fan Duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Part cooling fan duct for the Hemera (and XS)
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 635
- Wydruki
- 6
- Wyświetlenia
- 3305
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (2)Kolekcje (71)Powiązane
This is not my design, this is a copy of https://www.thingiverse.com/thing:4091776 that I wanted to migrate to Printables, and I've also designed and included a Hemera XS mount to go along with it.
Use a piece of filament to secure the fan duct to the mount (see the small hole on the side)!
Print using either .2 or .3 layer size and PETG or ABS (for heat resistance). If you DON'T print with a heat resistant material you can expect the duct to sag and eventually bump into your prints :)