Ender 3 v3 SE 5015 blower fan ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Left and Right 5015 blower fan ducts for the Ender 3 V3 SE. Best airflow I tested so far.
- Ocena
- 4,5 / 5
- Polubienia
- 195
- Pobrania
- 1325
- Wydruki
- 12
- Wyświetlenia
- 6936
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed 20mm, 3 walls and PETG. You need at least 2 M3X20 pan head screws to secure and stabilize the blower into the part. I used 4 because I wanted they super tight :)
I managed to print the left one without any supports and for the right one only on the extreme overhang, but I did it with good cooling using prototypes of the same duct, added images for good visualization :)
Hope you like it. These have the best airflow I tested so far for ender 3 v3 se with 5015 blowers. Thanks the author for the original model.
On a later date I will try to put honeycomb walls on these to improve aesthetics even more. Will run some tests before to ensure this doesn't harm efficiency.