1 / 17
Artillery Hornet dual 5015 print head + cooling duct — zdjęcie 1
1 / 17

Artillery Hornet dual 5015 print head + cooling duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Updated version of dual fan duct for Artillery Hornet

Ocena
5 / 5
Polubienia
88
Pobrania
681
Wydruki
11
Wyświetlenia
3676
Oceny
11

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Version 2.0 is ready now!

This is a more “Hornet-style” implementation with the triangles and sharp edges. Also the BLTouch probe is a separate part as not all owners use ABL.

All parts are to be printed as set in .stl files. Use supports for overhangs and bridges.

There are two probe mount configurations. The included 3D renderings show differences.

Offset for 2.0:

X - 70.00 mm

Y - 0.00 mm

Z - User defined

 

Offset for 2.1:

X - 23.00 mm

Y - -50.00 mm

Z - User defined

 

Please note that the print head model does not have holes for nuts like version 1.0. The holes are sized in such a way that an M3 (M3 x 20 is recommended) bolt will self tap into the hole if you slowly screw it in. Don't over tighten or risk of stripped threads occurs.

 

Necessary hardware:

2 x 5015 fans (24 V)

2 x M3 x 20 bolts

Tagi