Artillery Hornet dual 5015 print head + cooling duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Updated version of dual fan duct for Artillery Hornet
- Rating
- 5 / 5
- Likes
- 88
- Downloads
- 681
- Makes
- 11
- Views
- 3,676
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Version 2.0 is ready now!
This is a more “Hornet-style” implementation with the triangles and sharp edges. Also the BLTouch probe is a separate part as not all owners use ABL.
All parts are to be printed as set in .stl files. Use supports for overhangs and bridges.
There are two probe mount configurations. The included 3D renderings show differences.
Offset for 2.0:
X - 70.00 mm
Y - 0.00 mm
Z - User defined
Offset for 2.1:
X - 23.00 mm
Y - -50.00 mm
Z - User defined
Please note that the print head model does not have holes for nuts like version 1.0. The holes are sized in such a way that an M3 (M3 x 20 is recommended) bolt will self tap into the hole if you slowly screw it in. Don't over tighten or risk of stripped threads occurs.
Necessary hardware:
2 x 5015 fans (24 V)
2 x M3 x 20 bolts