Counting matching models…
I'd like to share my deshroud mod for the ASUS GeForce RTX 3070 DUAL graphics card. It holds two 120mm fans (120x120x25) with standard mounting holes. I printed it with a wall count of 3 and 40% cubic infill. It may not look very stable,…
Please print the lid with the round part stuck on the build plate! enjoy!
- Toy style two-piece dual color version of Lockheed Martin's Blackbird SR-71 and F-35. - Easy to resize, easy to print (no supports) and to be used as giveaway, toy, or design object - ideal with the small optional stand for a table. -…
Give some extra color to your bike with these dual color handlebar plugs. These plugs have total diameter of 32mm so they match better with lock on or really thick grips. Thanks to Single - Extruder Dual - Color technique, you don't need…
Remixed from my hex hole remix of the original dual HDD stand by orax, reduced height for two slim SSDs.
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
This magnetic keystone dual jack mount designed these to go with 10 mm diameter x 2.65mm high screw in magnets. These use M3 countersunk screws and 4 mm high heat set inserts. Magnets: https://www.amazon.com/gp/product/B09ZLFNZ4S Inserts:…
I made this so i can easily route two spools filament from my Creality Space Pi Plus to my Creality K1 max. Layer height 0.2. used 5 walls , just use as many as you would like Its a small piece so wont take much time so better make it…
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
4x m3x8mm (or 6mm) screws are used. The screws go directly into the plastic (modelled as 2.9mm holes). FreeCAD and Step files are available if anyone wants to modify it, e.g. add heat-set inserts. Stand consists of two feet, so print file…
A Multiboard dual snap that allows you to create 90° corner tile multiboards without using brackets. This minimizes filament use and space required (can be placed on tight corners, walls etc). Also keeps the tiles available for other…
Unlike other designs it does not integrate dovetail mounting and therefore is completely generic, working in any form of tool post from quick change to standard. May limit the size of stock that can be trammed in on mini lathes due to…
For mounting behind walls, these holders are designed to securely support one or two 16mm flexible conduit tubes. Each slot includes an inner lip to ensure the conduit remains firmly in place. Including a drilling template for the dual…
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This stand is similar to the other Playstation 5 Dualsense Controller Stand I posted but this one has a cut out in the back that uses less filament. It also has the PS5 title. If you have any issues or questions please feel free to reach…
These are replacement Tetrimino pieces for the Tetris Dual game. I had bought this game at a charity shop, but there were a few pieces missing. It was playable without them, but made it a slightly unfair game. I decided to model the…
Works with Bambu Lab X1, X1C, and P1P printers. The Bambu Dual USB with Switches is for the Bambu Lab 3D printer. It utilizes the 24v provided by the Bambu Bus Cable to power the two USB Ports. It uses 4-pin Molex cable connectors to…
UPDATE Dec 21,2024: I was asked to provide a dual 120mm edition . I have uploaded the files (fanstack120 + tpu-gasket120), but i have not tested these myself . If someone can offer some feedback, that's be awesome ! The screws to mount…
Adapters that slide over the arms of an Apple Vision Pro to enable the attachment of a second Dual Solo strap. The arms have to be detached from the body using the special pin that was shipped with the AVP. I printed the adapters…
2 versions de suport antenne pour JeNo 5". Une version pour les antennes SMA et une version classique. Les deux versions s'impriment debout avec juste un petit tree support sous la partie deversante horizontale à l'arrière.
stuff needed: possibly a drill to drill the mounting holes on the 4010 turbines to fit M3 bolts, because I can't be bothered buying M2.5's; 8 M3x6 bolts, possibly M3x8 with a washer; 8 6x2 or 6x3 magnets; superglue to secure the magnets;…
Controller stand with Xbox logo and gridfinity support (w/ magnets placeholder). Perfectly fits: Xbox ONE Controller; Xbox Series X|S Controller; Compatible (check pics): Playstation dualshock 4 (PS4) Playstation dualsence (PS5) Print…
UPDATES: 28/07/2026 New flywheel cage! This now consists of one printed part, and 2 metal plates to mount the motor. Plate .step file included, can be cut via JLCCNC or sendcutsend. Removed sub250 1304 motors as an option and replaced…
Print with PLA or PETG, only 1mm of clearance so warping could prevent fitment. Update: Redesigned for 5x3mm neodymium magnets, just glue them in place (they have to sit flush with the contacting are). 5x1mm magnets weren't strong enough……
I couldn’t find a choke tube holder that seemed practical for field use, so I designed this. These holders are made to fit 12-gauge shotgun choke tubes. The dual version has holes for attaching it to a lanyard or similar, and both…
(v6), (v6+), and (v6e+) models now available to choose from! This simple card holder takes 5 minutes to print (on my P1S), and uses just 1.6 grams of filament! It's a perfect “last meter” print that comes in handy more than you think. To…
Tokyo Marui Dual Stainless Holster with Tactical SF XC1 Flashlight To fix the lock, it needed a piece of a paper clip 37mm. And you can make a hook on the clip to a better fix. Suggested config print: layer height: 0.2 wall loops: 6…
Astronomical telescope dual focuser 4:1 knob v2.0 For M4 steel shaft. < Filament > anything. < BOM > 676zz(mr106) 2ea 6704zz 1ea M3 hex sockethead cap screw 20mm 3ea M3 hexagon nut 4ea M3 socket set screw 8mm M4 socket set screw 8mm M4…
Works only on Ender 5 Pro with Core XY (without the wheels) Here is the list of stock parts it uses: - ender 5 pro 2 z axis extrusions (NO CUTTING NEEDED) - 2 linear rods - lead screw - all z drop brackets with no need to order new -…
With the arrival of the Core One I had some difficulty reaching the power switch in the back of either the XL or Core One. I made this box to house two remote switches I bought from Amazon (link below). It uses 4 M4 nuts & bolts to secure…
I made this to adapt an old speaker/mic to my QMX. The spacing between the 3.5mm audio plugs is 12mm. It will only plug in one way because the other way the power cable will block it. The 3.5mm plugs I used have 7.9mm ends which depending…
a loop to replace tape or fastener to keep the batteries stay in the GoPro Dual Battery Charger . I need to charge the battery during riding. it helps keep the batteries falling out of the charger.
For Avatar HD Pro dual antenna, mount perfect for ERA Frame For 25mm Standoffs (middle to middle) I printed this in TPU, also PETG, PLA,……
Description This is a fully 3D-printable enclosure for a dual-output laboratory power supply, designed for makers, hobbyists, and engineers. It provides two independent power outputs: Fixed Voltage Line: Adjustable via an internal…
The 90-degree elbow reducer is used for hot air heating from 3.5" to 2.5". PA-cf recommended for temperature resistance
I haven't had the chance to try it yet. Just a little edge reinforcement using the Shell tool.
Still relatively new to the CAD side of things. Made this simple toothbrush holder in Tinkercad. I recommend printing this on its side (a brim may be helpful if you don't have great bed adhesion). It should work without supports, but you…
Dual support designed for the KWS-AC301. Modeled in 3D to provide a practical and functional solution, ideal for securely organizing and mounting the device. Dimensions: 80x120x42mm. Features a cover fixed with M3x8mm screws and includes…
Multi Dock - Dual Phone and Watch or Tablet Stand November 2025 update : added Magsafe stand suitable for newer phones with large camera bumps on back and also watches with single strap. See other models. May 2025 update : added Magsafe…
This printable mounting bracket is designed to hold two multi-outlet extension cords (power strips) back-to-back. The component features precise slots that capture and align the ends of the power strips, locking them in place without…
Introducing the 'Individual Scale' model, perfect for cosplay enthusiasts and DIY crafters. This triangular, textured piece boasts a precise, patterned design ideal for creating lifelike armor or accessories. Elevate your creative…
Want to try dual idler and it looks fun, if you did any test compare with single idler please let me know. 2 ver 4 bearings or 6 bearings. Original plan was to use 672ZZ(2mm ID) bearing but too hard to get, switch to 681XZZ(1.5mm ID)…
Since I started working on small scale solar power plants, I continued to search for ways to increase the energy yield of the two to four solar modules. The “Sunchronizer D1" Dual Axis Tracker is a solar module holder with which…
https://youtu.be/s_dC-w5gyA0?si=XXUXzHBmlcngIpb- please do post pictures of makes and remixes i would love to see them and also please tell me if theres any modifications i should make for durability or handling. 2212 motor, 120 A esc, 9g…
English Adjustable 3D-Printed Stand for iPad Pro M4 & M5 11” (2024 & 25) – Dual-Color Modern Design with Integrated Apple Pencil Charging Key Benefits: • Multi-purpose versatility: Three optimized angles (85°, 50°, 25°) perfectly suited…
🇬🇧 English This holder allows the Benq Screenbar to be used on a monitor mount with two screens. The clamping ring with a diameter of 35 mm can be mounted on the bracket shaft of the monitor mount, while the three coupling rods with a…
This is a strong and practical dual spool holder for 3D printing filament. It supports either two standard spools or one heavy 3kg spool . The center includes a removable spacer disc , allowing you to easily switch between dual spools or…
Nothing fancy just keeps your spare Canon NB-6L or NB-6LH batteries together. Best printed with the scollop side down so the retaining bumps are pointing up. Example printed in PETG at .28
I created this model to hold my Canon LP-E10 batteries in place on the charger because the spring would push the battery up and prevent it from charging. This Model was created in Fusion 360. Enjoy!
thank you too AB Quintic for the base model, this is a double sided Diessell choke barrel, with a riffled segment in between. improves accuracy and distance of the half darts.
These are the printable pieces to accommodate two OneWheel GT chargers in one box. Only the box needs modification (side holes drilled and IEC jack). Features… - Space for two GT home chargers - Cooling channels around the chargers - 40mm…
Dual 21700 Box Easy and Fast Print, No Support, No Problem :) Buy me a Coffee https://www.paypal.me/obuluto
There are Two parts to print ; 1. The back cover (I printed in several parts then glued) 2. The hose connection, here I choose to make the same design than the orgininal, but you could design what you prefere (I glued it too). The device…
I'm not a fan of travel cases, no matter how small I think they're too bulky. Just slip this minimal dual purpose stand over your OneBlade and go. An opening on the bottom lets the stand slide onto the shaver’s head, gripping it securely…
Simple AWD Y Mod for the Ender 3 V2, the mod requires a custom length belt.
A new belt tension system for the single motor dual z axis gantry lift system I created. Two 3D model parts printed and put together with 4 Dragon 608 flanged bearings. Mounts to inside and outside of the 3030 frame with M4 screws and…
This is a protector for your PS4 controller (i.e., the Dualshock 4). It covers both analogue sticks, all buttons, and also includes a shroud for the triggers. It is kept in place with a simple strap that is printed flat without any…
XL Cubic Build Surface + Dual-Purpose Cuboctahedral Base (Expansion for the Endless Design Blocks Intro Kit) This upload introduces a large cube-shaped build surface designed to work seamlessly with the blocks from the Endless Design…
The Apollo Automation R PRO-1 PoE mmWave Multisensor (LD2450 and additional LD2412 add-on option) is our most advanced presence sensor. Designed for power, precision, and reliability, the R PRO-1 is a compact PoE mmWave sensor built for…
Frame X Dji 04 Pro Air unit Dual Antenna Mount And XT60
Bracket to adapt dual 80mm fan holes to a 120mm fan. Made for a RAIDMAX Scorpio 868 case. Screw the fan to bracket first then screw the bracket to the case. Printed in PETG.
2CH USB Charging Port Module is: https://www.ebay.com.au/itm/176571343175 https://www.aliexpress.com/item/1005007038056734.html https://www.amazon.com.au/Dlb0109-Converter-Charging-Libertine-high-Performance/dp/B08SKDKVQB Replace both…
Crashing my Volador VX3 FPV quadcopter repeatedly caused my camera to change angle or get damaged, so I designed this thing. It fits Walksnail Moonlight with filter, or any other 19 mm FPV camera at fixed angle of 30°. Integrated lens…
I used this parametric box to make this model, I sized it for two inhalers and also added a white logo that is on the lid
Compact Case for MMDVM Dual Hat (PCB-Only) Give your MMDVM Dual Hat Hotspot the perfect standalone home! This case is designed exclusively for the HS Dual Hat PCB — the Raspberry Pi is not housed inside . I run my Dual Hat connected to…
YOU NEED A BOARD THAT SUPPORTS 2 STEPPER MOTTORS ON ONE DRIVER (LIKE BTT SKR MINI E3 V3) What you can expect after the upgrade: The structure supports the bed on the other end, so it cant flex up and down freely like it does in the…
I often switch my small Kiox screen with my Bosch SmartPhone Grip to use my smart phone as a navigation… but this was not working lately. The heavy phone, my driving style or the bumpy road was often to much for the single mount arm of…
A holder to hold the Orico M.2 Enclosure in the gridfinity system.
Dual Z-Axis Upgrade for Anycubic Kobra 2 The dual Z-axis upgrade for the Anycubic Kobra 2 is a modification that adds a second lead screw and stepper motor to the gantry, providing increased stability and precision. This modification…
Capture the fierce combat style of a Demon Slayer with this 3D printable STL model of Inosuke Hashibira in a Dual Swords Pose. This dynamic character figure is perfect for fans looking to add an action-packed piece from the popular series…
Edit - This works but I stopped using it because I found that it's not needed when using a 610mm belt, with modified upper z-screw bearing blocks. The blocks are similar to the ones that come with dual-z screw kits, but modified to allow…
3D print your own supersized LED Clock or 7 segment display with this downloadable fully modular kit and ESP32 with LED strips. Use my arduino code or use WLED with a usermod. Create any format clock, numeric display with decimals, phone…
You'll need four 608 ball bearings, four M4 x 20mm button head screws & 2 hex nuts, plus the original M3 x 18mm screw used on the original filament guide. 2026-04-06: V2 addresses an issue reported by @mgranger114
I remixed this model to add ecas 4mm fittings then made it larger and longer to improve reliability.
The Detergent Funnel is a practical helper for washing machines installed in tight spaces, such as closets. It combines a measuring cup with a funnel , making it easier to pour detergent or conditioner directly into the machine’s drawer…
These models are based off of a Dual-lumen PowerPICC™ FT Catheter at Ann & Robert H Lurie Children's Hospital of Chicago. It's intended use is for medical education and fostering medical play opportunities. The model consists of three…
A remixed webcam mount with a perfect view of the nozzle.
dual level external holder, great if you have an dual extruder printer such as the H2 series or if like me you have many printers running side my side and need to maximize space this print does require a larger printer to print it one…
A trumpet mouthpiece with two holes so you can play two trumpets at the same time.
Esp32-s6 case with lid. It's a very tight fit might need some light sanding and pushing depending on the PCB cut.
I wanted to mount 2 UHP Power supplies and I didn't have tools to tap new holes in my Bakelite electronics bay base I used these as both a drill template and a mount. Drill 4 holes for one end (2 per power supply) and use the power…
I wanted to build my sister a simple, aesthetically pleasing, and great sounding pair of speakers for her living room. I found this ported enclosure for the Dayton PS95-8 full-range drivers by @ProjectsByBrian, and loved the design.…
This was my first attempt at a whistle that is compact, fast to print, and doesn't take much filament. I designed this because I'm printing and donating whistles to various groups around me in Chicago. This is pretty loud at around 100db,…
This is the second iteration of a compact and easy-to-print whistle that can also be batch printed due to being printed on its side. This takes less time to print and less filament than my first iteration , but you might like that style…
A minimalistic fan shroud for 60 mm fans with a Bitcoin logo in the center. The Bitcoin logo is embedded on the first layer. The fan shroud should be printed with the logo facing the printbed. The mounts towards the fan is also extended…
I wanted to make it easier to cut new hexagonal opening for PolyDryer Dual Port Adapter by @SparrowHawk_421862 (thanks for that design!). Original model has alignment hexagon template, but you need to position it carefully and secure it…
This is a very quick remix !! Topology isnt ideal, please DM me if theres any problem
A new 3D figurine generated by AI, The Three Wise Monkeys. I print my models on a slightly ageing printer. I try to find the best quality/time ratio for my prints. I print these models in fairly small formats, and the quality of the…
I was looking for a dual PCIe vertical GPU mount that could accommodate a low-profile network card as well, but I couldn't find any that suited my needs, so I designed one! BOM: - x5 M3x10 Flat head screws - x4 M3x16 Flat head screws - x3…
This is a top-mounted dual spool holder designed for the Bambu Lab A1 Mini. It attaches to the Z-column using the printer's existing hardware, providing a secure and integrated setup. The mount accommodates two standard filament spools,…
Use this stencil to create your pattern for the Duality HexGrid system. I created this model so you can have your pattern figured out before downloading the HexGrid system.
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
I wanted a dry-box with a rewinder system to pair with my ERCF V2. Filamentalist was the ideal choice that minimize space; however, I could not find a viable dry-box for it. I wanted a cheap solution for each spool to be individually…
for 80mm 10t fans u get around 5mm clearance from the side pannel to the fans so theres no turbulant noise uses m3 and nuts for fan mounting and m2 screws check m.2 ssd clearance u can use supports and print in one peice if u dont want…
