1 / 7
Ultimate 5015 Part Cooling Dual Fan Duct for Ender 3 S1 (Pro) + Sprite Extruder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
5015 blower mount with dual exit designed to fit Ender 3 S1 (Pro) / Sprite Extruder (Pro)
- Rating
- 4.705 / 5
- Likes
- 592
- Downloads
- 4,213
- Makes
- 40
- Views
- 24,945
- Reviews
- 44
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
CHECK OUT MY NEW RELEASE → 5015 Hot End Fan Upgrade for Ender 3 S1 (Pro) + Sprite Extruder
Design:
I have created this model with the following considerations:
- dual, symmetrical airflow under the nozzle
- to be as light as possible- weighs @ 20 grams only
- snap-on mount 1x 5015 blower (24V)
- retain maximum printing visibility
- to have shortest & as straight airflow as possible
- clear CR Touch probe
- avoid magnetism of the extruder motor
- not to suck in strings from print
Printing instructions:
- printing orientation on bed as shown in pictures
- material: use PETG or better (avoid PLA, due to low heat resistance)
- layer height: 0.2mm or smaller
- enable supports → recommended to use PrusaSlicer 2.6 Alpha 3 or similar slicer to use Organic / Tree supports LINK https://github.com/prusa3d/PrusaSlicer/releases
- use at least 4 perimeters
- infill: any
- note: most of the model has 40°+ Deg overhangs
Fitting instructions:
- after clearing supports, use 2x M3 bolts (ideally 8mm length, or use nuts to shorten any longer bolts you may have)
- use 24 Volt 5015 blower and splice/solder/crimp onto a stock connector
_____
Version history:
v1.3
13.3.2023
- snap-on mount is now bigger and holds blower more secure
- screw openings are tighter = screws sit flat
- redesigned holder for less overhangs and easier printing

v1.2
23.2.2023
- stronger mounting arm to eliminate flex
- tighter screw openings with flat sides
- tighter snap-on fan blower mount
- flat outlet bottoms to allow for better bed clearance

v1.1
10.2.2023
- thicker duct-to-holder mounting points
- thicker air flow divider with smooth transition into ducts

v1.0
9.2.2023
- initial release
Please leave a comment with your feedback!