Search results: sprite

Counting matching models…

Printables

Zero Y-Offset + 5015 Fan Backplate for Sprite Pro (With PTFE coupler)

Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…

Order a print of this model

Printables

Accelerometer Mount for Creality Sprite Direct Drive Extruder Kit

Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.

Order a print of this model

Printables

Calcifer, No Face, and Soot Sprites - Unique Christmas Ornaments

Un set di decorazioni natalizie ispirate ai classici dello Studio Ghibli. Ogni pallina è progettata per catturare l’essenza dei personaggi più amati come Calcifer, Senza Volto e i Nerini del Buio, rendendo il vostro Natale un tributo…

Order a print of this model

Printables

Sprite Nova Shroud Remix

Love this design, Have it on my machine, but found when the stock fan touched the back of the Motor would not work. So we extended it enough to make sure this doesn't interrupted operations. Its not pretty but it works. pictures coming soon

Order a print of this model

Printables

Ender 3 V3 SE KE Sprite Cable Relief

Just need a replacement? This is as simple as it gets.

Order a print of this model

Printables

Creality Sprite Extruder SE Filament Sensor - Z-STOP

Zůstala mi deska z-stopu a tak jsem předělal celí držák ….

Order a print of this model

Printables

Ender 3 Max Neo Sprite SE Adapter

Well... Creality sent me a bracket to mount a direct drive kit to my printer. The screw hold don't line up, and neither does the extruder. I have to have my friend print this fix because my printer in unusable. Version 2.0.0 - Updated the…

Order a print of this model

Printables

Creality Sprite Extruder SE Filament Sensor-Bowden uchycení drážky

Přidaní o matku pro uchycení bowdenu .....

Order a print of this model

Printables

Apogee FAT For Sprite Extruder SE, 4020 Fan, MK8 / Spider hotend

Key changes: Hotend mounts to the ender 3 v2 stock carriage. No nozzle offset vs stock. Should work with most mk8 replacement hotends like the Spider V3 that I have. Works with Sprite Extruder SE that also mounts to the stock carriage.…

Order a print of this model

Printables

MMU3 Undertale sprites (accurate proportions)

This is a project I have started at the start of 2026 and is still being worked on. In an unspecified amount of time, most, if not all, the most important characters present in the game will be published. Keep in mind that I'm currently a…

Order a print of this model

Printables

Ender 3 IDEX edition + Belt driven Z + Sprite extruder

i made some aesthetic tweaks to the parts including a hole in the covers for a motor visualizer, and left a folder with the parts without those mods (you will have to get the rest from the original post). for the main sprite extruder i…

Order a print of this model

Printables

BTT adxl345 V1.0.1 mount for Ender 3 S1 sprite extruder

BIGTREETECH ADXL345 V1.0.1 mount for Ender 3 S1 sprite extruder. You will need 2 x M3x5 screws to fix the accelerometer.

Order a print of this model

Printables

X45 Sprite Eddy Probe Mount v1.0 (Ender-3 S1 Pro and similar)

Mounting solution for a BTT Eddy probe on the Ender 3 S1 and similar Sprite extruder models. Only tested on Ender 3 S1 Suggest ABS or similar heat resistant material. Support will be required for the alignment guide. I printed my original…

Order a print of this model

Printables

Sprite Extruder Backplate

I was inspired by another model, but I drew it from scratch because it was without thermal bushings and was not aligned.

Order a print of this model

Printables

K3D Sprite Dual 5015 volcano

A little comparison, the red model is the original one I printed out a year ago. I shifted the nozzles so that they were in the center of the nozzle. I made the walls thicker I made holes for thermal inserts Redesigned the planes for fans…

Order a print of this model

Printables

Funnel for coca cola fanta and sprite perfect fit for them

funnel for coca cola fanta and sprite perfect fit for them

Order a print of this model

Printables

creality sprite - Fan Duct 4010 adjustable i guess (not tested xD)

With the OG model had to heat the model and bring it down a little, i made a remix, it should allow you to bring the fan duck up and down.

Order a print of this model

Printables

Cute Mushroom Forest Sprite – Chibi Toadstool Fantasy

This Cute Mushroom Forest Sprite brings charm and whimsy to your fantasy collection. With its oversized spotted toadstool cap, tiny rounded body, and simple expressive face, this chibi-style woodland character is perfect for collectors…

Order a print of this model

Printables

Mushroom Forest Sprite – Cute Fantasy Woodland Creature

Step into an enchanted woodland with this adorable Mushroom Forest Sprite. Blending natural elements with whimsical character design, this charming creature features a large mushroom cap as its headpiece, delicate elf-like ears, and a…

Order a print of this model

Printables

Undertale Flowey sprite keychain

You can color paint in the slicer based off the image. (DON'T MIX PLA AND PETG PLEASE IT WILL NOT WORK) also if you liked this model, please consider rating and uploading a picture!!!

Order a print of this model

Printables

ender 3 adjustable x axes for sprite

ul need 2 m5 bolts and t nuts as it mounts to the 20/20 i got the sprite adpter and fan cover off printables from @Crazy . i made the adjustable x stop bracket.

Order a print of this model

Printables

Ender 3 Sprite Extruder CR Touch Mount

Not much extra info needed, other than it brings probe closer to bed by 1mm compared to original. here is the description of the original "This is a replacement backplate for the Creality Ender 3 S1/S1 Pro Sprite Extruder that moves the…

Order a print of this model

Printables

Sprite Extruder mount for Duender mgn9h

I recommend using ABS, ASA or at least PETG. You need to cut the tap which hits the endstop from the original mounting plate. Installing is also very simple. Screw the printed adaptor onto the linear carriage using m3 screws. Now bolt the…

Order a print of this model

Printables

Sprite Pro Plus (CPAP)

I figured I would mock Apple's naming scheme a bit. Next version will be the Sprite Pro Plus Max This is a heavily modified sprite pro. I wanted speed and good cooling, without buying an entirely new toolhead. At this point I may as well…

Order a print of this model

Printables

Messuhrhalter für Creality Sprite Extruder Pro Ender 3 v2

Es werden noch eine Messuhrverlängerung von 30mm benötigt und 3 M3 schrauben mit einer Gewindelänge von 10mm.

Order a print of this model

Printables

Ender 3 V2 Neo Sprite Pro TPU Profile - Orca

My Orca settings for TPU printing with Sprite Pro

Order a print of this model

Printables

BTT ADXL345 Sprite Extruder side mount

This is a remix of the BTT ADXL345 bed mount and positions the adxl345 on the side of the Creality Sprite Extruder.

Order a print of this model

Printables

Ender 3 S1 (Sprite) ADXL345 Fly USB mount

A mount for attaching the Mellow Fly ADXL345 USB accelerometer board to the Sprite hot end and clipping to the bed. Mounting to the hot-end is done using the two lower screws on the right-hand side. The mount should be flipped upside…

Order a print of this model

Printables

DuEnder Sprite pro mgn12 mount

same directions as MGN12 mount for the Creality Sprite Pro Extrude add 2x m3 thread inserts and screws for belt retainer I wanted this so I figured other people might want it too so here it is I am unskilled and doing the best I can so…

Order a print of this model

Printables

Sprite Extruder Pro Bracket for Mercury One.1

A remix of https://www.thingiverse.com/thing:6476036 by ethomasgt. Enhancements: Added support to eliminate flexing Lifted the tool head to reduce lever effects Shifted the CG towards the rail to reduce the overhang sags. Added a mounting…

Order a print of this model

Printables

Sprite Nova V2 remix 4020 fan for Ender 3 S1 Series

Creality CHA4024RL-20B fan variation

Order a print of this model

Printables

Extruder Cable Guide for Ender 3 S1 and CR10 Smart Pro by MAXPROBE - Strain relief for Creality Sprite extruder ribbon cable - Cable holder cable mount suits Creality CR10 Smart Pro Ender 3 S1 Pro

Extruder ribbon cable strain relief cable guide Fitting a cable guide to your printer allows the ribbon cable to flex gently over its length rather than bending all in one place - which can lead to broken wires. This unfortunately is a…

Order a print of this model

Printables

Slim X axis for ender 3 now for Sprite pro hot end

You will need M3 x 30 mm screws instead of the stock and I would recommend getting the chamfered ones Original creator of the model is @Turricanus 9/27/2023 I remade the model because the model a ton of holes in it because I just took the…

Order a print of this model

Printables

Fysetc Portable Input Shaper mount for Creality Sprite Pro

I recently remixed a portable input shaper mount, but after watching a Modbot video on the best location for input shaping decided to design a new one which lowered the Portable Input Shaper closer to the nozzle. Without removing the part…

Order a print of this model

Printables

Cableguide Ender 5 / Sovol SV05 X-Axis for flatband cables (i.e. Sprite Pro Upgrade)

Print flat on printbed without supports. Part can be comfortably made from PLA.

Order a print of this model

Printables

G-Force Sensor Bracket for Sprite Pro

An adapter to mount the Creality Nebula Pad G-Force sensor to a Sprite Pro. Screws into the existing CR Touch bolts.

Order a print of this model

Printables

Sprite Extruder 0 Y Offset and 5015 hotend fan Remix

This back plate had 2 remixes so I merge two of them. Best of two worlds right. This one having a trim from the Cr-Touch mount and reinforced mounting point.

Order a print of this model

Printables

Sprite pro reverse bowden holder

Simple model of reverse bowden bottom support for 4mm PTFE tube. Build instructions : I build it from PETG-PTFE 10% - becouse I have it and it is black so it fits to sprite extruder well. I build standing as will be used on extruder and…

Order a print of this model

Printables

Creality Sprite SE direct drive extruder mount for Elegoo Neptune 3 og

You'll probably have to swap the center wires of the included cable to make this work, but otherwise, it runs great after tuning E steps. Check my youtube channel for a video on installation with the Neptune 2 (almost the same machine,…

Order a print of this model

Printables

Creality Sprite SE extruder v2 for Elegoo Neptune 2/2S

The Elegoo Neptune 2 had two variations of the X axis carriage plate. One had swept radii across the top, one had 50 degree angles. This is for the swept radii version. The other version I uploaded is for the angled plate. Installation…

Order a print of this model

Printables

Sprite Extruder Mount for EnderXY

This adapts the stock EnderXY mounting plate to attach a Creality Sprite Extruder. Print in the provided orientation with supports. Print with lots of walls for strength and rigidity. High temp material like PETG recommended, but I used…

Order a print of this model

Printables

CR-6 SE/Max direct drive Sprite SE

CR-6 SE/Max direct drive Sprite SE mounted on the strain gauge. 5015 part cooling on the right side to obtain perfect overhang print at 70° ! stock hotend or Phaetus dragonfly BMS stock 3010 hotend cooling or 4010 fan mounted on the cover.

Order a print of this model

Printables

HeroMe 7.4 Creality Sprite (SE) feeder mount

This is for Creality Sprite feeder without hotend. Original collection didn't have such mount so I made my own. Added screenshot of how I placed it in slicer, I gor smooth results on Creality K1. Can be printed with anything including PLA…

Order a print of this model

Printables

Creality Sprite Extruder Fanduct Replacement

Print with PETG or higher temp resistant materials. Enjoy!

Order a print of this model

Printables

Ender 3 Pro (Sprite Extruder) Side Cooling VOLCANO REMIX

Just adjusted the height for volcano in fusion 360 (im a total noob at it, so its not perfect).

Order a print of this model

Printables

Ender 3 S1/Pro/Plus Sprite hotend fan 5015 - stock CRTouch

Version Slim y mejorada

Order a print of this model

Printables

V2 Slim X axis cover Ender v2 and Sprite pro hotend

You will need M3 x 30 mm X4 countersink screws instead of stock This is V2 this one includes a camera mount and instead of chains this is just a clip option which I prefer for ease of maintenance here are the wire clips that you see in…

Order a print of this model

Printables

Ender 5 Plus Sprite Pro Cooler for Dragonfly BMS

Finally burnt up the tips on my original cooler and designed this one to work with the Ender 5 Plus, fitted with a Sprite Pro extruder and a DragonFly BMS hotend. The cooler arms mount to the side of the Sprite extruder with 4 - M3 x 10mm…

Order a print of this model

Printables

ENDER3V2 / S1 SPRITE UPGRADE DUAL 5015 FAN MOD

I installed this setup on my S1 it is a GREAT MOD! I went to put it on my v2 sprite upgrade and realized it wasn't going to work so I added the endstop mount . You can use this on a S1 as well i made the parts a little thicker and…

Order a print of this model

Printables

5015 Parts Fan for Sprite Extruder with E3D REVO (Reindeer Shroud)

Two versions, one uses 2 screws to mount like the original. The second version uses 3 screws to mount to the motor. The CRTouch fits in the original location with this fan duct mounted. From the original designer: "My take on the 5015 fan…

Order a print of this model

Printables

Ender 3 Pro 5015 Sprite Pro Fan Shroud

Minimalist style Ender 3 S1 5015 part cooling and 2510 hotend fan duct with easy to install magnetic mount made by Maxim

Order a print of this model

Printables

5015 fan & 8mm camera mount (Sprite Extruder)

This mount contains 3 parts: main mounting plate: screws onto the stepper motor using original screws of the 4010 blower fan fan mount: to mount a 5015 blower fan. Requires additional M3x20 screw. Slides into the main mounting plate…

Order a print of this model

Printables

ADXL345 holder for Sprite Extruder CR-Touch mount

Material and layer height doesn't really matter because the part is so small, but if you want to ensure maximum accuracy for testing, you can print it with a smaller layer height and with better filament. Also print hot enough for enough…

Order a print of this model

Printables

Cable Strain Relief for Sprite Pro Extruder and Sovol SV01 Pro

After upgrading my stock Sovol SV01 Pro extruder to the Sprite Pro, I needed to print this to get some cable strain relief. I attached this to part of the carriage on the left side of the printer, where the previous extruder's cable snake…

Order a print of this model

Printables

Sprite Extruder Accelerometer holder

Simple-ish model to mount various compatible accelerometer board to the Sprite extruder pro! Made it in 2 pieces for ease of print & potential modularity, some assembly required though. Mount tested with ADXL345 (GY-291) & MPU-6050…

Order a print of this model

Printables

BTT ADXL345 mount for Sprite SE

BTT ADXL345 mount for Sprite SE Tested on Ender-5 S1

Order a print of this model

Printables

Creality Sprite Extruder Pro 5015 part cooling fan mod

Replace the stock fan with a more powerful 5015 blower. Use the same mounting and screws from the stock fan. You'll need an M4x25 mm screw to mount the 5015 fan. Print using ASA (I suggest 0.2 mm layer height, 5 walls, 10 top and bottom…

Order a print of this model

Printables

Sprite 5015 part cooling

Cool your parts with a more effective 5015 fan instead of 4010!

Order a print of this model

Printables

Ender 3 V2 Sprite X axis filament guide

I have an Ender 3 V2 with Sprite extruder. Needed a ptfe tube guide, but couldn't find the perfect one so I made a new for myself. Material: PLA, PETG, ABS doesn't matters Recommended print properties: Layerheight: 0.2 mm Walls: 3…

Order a print of this model

Printables

VK E3NG Sprite EXTRUDER

VK E3NG, a humble model that connect many things I wanted in my recent E3NG build. - X carriage from v1.2 - Dragon Burner compatible - Recycle Creality SPRITE extruder - CRTOUCH - Recycle of a spare VORON AFTERBURNER pcb ENJOY EXTRA INFO:…

Order a print of this model

Printables

Extruder visualizer for the Creality Ender3 S1 Pro with a Sprite Extruder

Reduced the hole to fit the 5mm diameter shaft of the Sprite extruder. I recommend printing in TPU and scaling the X and Y to get a snug fit. If you like my designs and want to send me a tip, you can do so via PayPal ….. Thank you and…

Order a print of this model

Printables

BLTouch/3DTouch Mount for Creality Sprite Pro Extruder

This is a remix of JohnTran_309510's Ender S1 Sprite Extruder CR-Touch Mount, for use with sensors other than the Creality CRTouch probe. There are two versions of the mount itself. The file named “BL2CRTouch_Mount.stl” has a provision…

Order a print of this model

Printables

Sprite Extruder + BTT Micro Combo

Sources i used : https://www.thingiverse.com/thing:6766639 , https://www.thingiverse.com/thing:6674744 . Summary Hello, i just got the BTT Microprobe today! Very excited as its my first ever ABL tool, and this would be my first remix…

Order a print of this model

Printables

Sprite Nova - Sprite Extruder Shroud and Dual Fan Duct Ender 3 S1 Series

– Update -- V2 now available here with improved design and swoppable face plates https://www.printables.com/model/1261604-sprite-nova-v2-customisable-sprite-extruder-shroud I was not satisfied with the fan duct options available for the…

Order a print of this model

Printables

Lego Austin Healey Sprite 1958

Order a print of this model

Printables

BigTreeTech EDDY Sensor mount for Creality Sprite Extruder Pro

Small piece, so I used 100% infill . Printed in ABS (2.36g). Fasteners 2x M3x8 2x M3x16 (comes with the eddy sensor) Version 3: Has holes correctly sized to fit brass M3 threaded heat inserts for fixing the Eddy sensor. Version 2:…

Order a print of this model

Printables

adapter for ender 3 filament runout sensor to work with sprite pro extruder

I'm putting this on pintables cuz it took me forever to find and I hope putting it here helps some people

Order a print of this model

Printables

Zero Y-Offset + 5015 Fan Backplate for Sprite Pro (With PTFE coupler)

Update 11/15/24: It was made aware that I did not include the PTFE connector that was used/fits with this adapter. Please see this amazon link:…

Order a print of this model

Printables

Ender 3 V3 KE Sprite Cable Lock

Replaces stock clamp if you loose it or want to add color.

Order a print of this model

Printables

eddy adaptor for sprite pro

This adaptor can be used to mount the eddy probe WITHOUT HOUSING to a sprite extruders original mount for the bl-touch Print Settings Printer Brand: Creality Printer: Ender-3 Max **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 15…

Order a print of this model

Printables

Creality Sprite Eddy mount

Wanted a mount that I can use that puts the center point of the probe to where the CR-Touch goes to and fit where the CR-Touch goes to. I upgraded my sprite extruder pro to my Ender3v2. No need to re-measure you off-set from your…

Order a print of this model

Printables

SpriteBurner Ender 3S1 Cooling duct based on StealthBurner (tested CHCB-OT hotend)

There is a newer version v2 - https://www.printables.com/model/1106005-spriteburner-v2-ender-3s1-cooling-duct-based-on-st I really love the StealthBurner look and wanted to make a cooling duct that has that cool turbine look for my ender…

Order a print of this model

Printables

Sprite SE Bracket (Ender-3 V2 NEO)

Works with M3 and M5 screws. Recommended to print in PETG , ABS , or ASA . 100% infill, 0.2 resolution.

Order a print of this model

Printables

Ender 3 S1 or Ender 3 with Sprite Pro w Volcano 5015 Shroud

Shroud modified from several of the 5015 Shroud mods by Maxim.

Order a print of this model

Printables

Creality Sprite Extruder cover

Tapa para proteger el cableado del hot-end y prevenir desconexiones involuntarias. Disponible en dos versiones, una limpia y otra con el logo S1. Imprimible en PLA o PET-G. Sin soportes. Cover to protect the wiring of the hot-end and…

Order a print of this model

Printables

Ender 3 Linear Rail Creality Sprite Direct Drive Extruder Mount Hero Me Gen 7

Additional 7mm added for mounting to duct

Order a print of this model

Printables

Ender 5 Addapter Plate for Creality Sprite Pro Extruder - REMIXED

You can fabricate these mountings with the DXF file using CNC machining, laser cutting, or waterjet cutting, resulting in a much more durable assembly. For example, the plate can be fabricated from a 2.5mm thick aluminum sheet. Also:…

Order a print of this model

Printables

Creality Sprite Pro - Wanhao d12 Adapteur

I made an adapter to fit the Creality Sprite Pro on a Wanhao D12 230 printer. The issue is that the Wanhao D12 has a 2040 aluminum extrusion on the toolhead axis, whereas the Sprite Pro is designed for a 2020 extrusion. P.S.: I'm not a…

Order a print of this model

Printables

Pneumatic Coupler Clip - Reverse Bowden for Sprite Pro Extruder

This Remix allows a M6 nut to slot in the clip, for threading a PTFE coupler.

Order a print of this model

Printables

Enclosed Heartbreaker MK5 - Dual 5015 Fan Cooling System for Sprite Pro/S1/S1 Pro

Having tried a number of dual 5015 cooling ducts for the Sprite extruder, the Heartbreaker MK5 is far and away my favorite. It's an excellent design that moves a good volume of air and adds the option for a bore camera focused on the…

Order a print of this model

Printables

Shine Sprite

This Shine Sprite was designed in FUsion360 and printed in Inland Silk Gold PLA at .25mm layer height and 15% infill (both the front and back). The eyes were printed in Inland Black PLA+ at the same settings. I printed all my components…

Order a print of this model

Printables

Ender3 S1 SpriteBurner Backplate 4020 Fan 0 Y Offset and PTFE holder and Filament Cutter

A brand new design of a backplate for ender 3 s1 sprite extuder. Mainly designed to be used with my SpriteBurner cooling duct v2. New update has a filament cutter for my hopefully upcoming multi filament build. Uses a 4020 hotend cooling…

Order a print of this model

Printables

SpriteBurner V2 Ender 3S1 Cooling duct based on StealthBurner

I really love the StealthBurner look and wanted to make a cooling duct that has that cool turbine look for my ender 3 s1. This is my second attempt at this. Much learned from my first v1 attempt. This improved version fixed a lot of the…

Order a print of this model

Printables

sprite extruder se adaptor for ender 3 neo series

For ender 3 neo and ender 3 v2 neo. It is recommended that you've already upgraded to have dual z rods

Order a print of this model

Printables

BD Sensor mount for Sprite Pro

Description BD Sensor mount for Ender Sprite Pro Stock Extruder. Replaces original CR-Touch Sensor. For software installation, please refer: https://github.com/markniu/Bed_Distance_sensor Applicable Printer All Creality 3D Printer which…

Order a print of this model

Printables

Accelerometer Mount for Creality Sprite Direct Drive Extruder Kit

Use M3 x 10 bolts try to use flatter heads on the bolts for easier usage. The Indented version is for my specific hot end that I printed so you may only need it if you have the same one.

Order a print of this model

Printables

Hot End Cable 90 degree holder for ender 3 V3 SE Sprite Extruder

I didn't like how the cable was held so i found a model for the spirit extruder but i had to change a lot to make it fork for the ender 3 V3 SE. PLA works but PETG is better.

Order a print of this model

Printables

Ender sprite extruder air duct dual 4020 fan. Ender 3 S1.

Update - added LED Bar for nozzle lighting. Hi, this is my newest part cooling solution for the Ender 3 S1 (Sprite Extruder). In this version, I focused on making the model much sturdier while keeping the unobstructed view of the nozzle.…

Order a print of this model

Printables

Creality Sprite Extruder Lever handle with cutout for 5015 fan

Modified original lever to fit the 5015 fan plate. Onshape file is available here if you want to make your own mod. Printing: Prints with hole side down with no supports on my machine. Recommend a brim to ensure bed adhesion. PLA seems…

Order a print of this model

Printables

3D EDGE Creality Sprite Extruder Housing Hex nuts version

Artem Makarov generously provided the step files of his Sprite housing version with a piercing needle as an alternative to PTFE tube. That's the mimimal remix of his model with hex nuts instead of the hot melt inset nuts. Filament…

Order a print of this model

Printables

Calcifer, No Face, and Soot Sprites - Unique Christmas Ornaments

Order a print of this model

Printables

Fortnite Water Sprite

This cute water sprite is small and hand held. I tried to make an air sprite but I just can't get it correct but I feel like if you print this in white it would work. The eyes can be painted or done with an MMU I personally used paint. If…

Order a print of this model

Printables

Laser Mount for Proper Printing's Sprite Toolchanger

This is a Creality Laser Module mount for ProperPrinting's sprite toolchanger . I kept switching between laser cutting and 3d printing, and I was getting tired of screwing and unscrewing the extruder. Then I found this sprite toolchanger.…

Order a print of this model

Printables

Sprite SE Bracket Remixed to Full Support

This remix features an extruded design on the roller sides, providing enhanced support and functionality for the direct drive system. The modification improves overall stability and allows for the addition of washers, ensuring a more…

Order a print of this model

Printables

Ender 5 Plus Sprite Pro Extruder Dragon UHF hot end solution

I recently upgraded to a Phateus Dragon UHF hotend and needed to change up my mounting system and cooling options. I decided to go with a more modular design so future upgrades only required minimal parts design/swap. This is the fruit of…

Order a print of this model

Printables

Filament Funnel for Sprite Pro Extruder

I wanted an easier way to hot swap filaments in my E3S1 Pro. It may work on the standard Sprite extruder also.

Order a print of this model

Printables

Sprite logo

The Sprite logo

Order a print of this model

Printables

BTT ADXL245 V2.0 Mount for Creality Sprite Extruder Pro.

Mount for the side of the Creality sprite extruder pro. Parts Needed: 2 M3X16mm screws 4 M3 washers (for the 2 16mm screws as a small spacer) (Can just use a M3X15 or 14 and just eliminate the washers) 2 M3X8 screws (for the actual…

Order a print of this model

Printables

Creality Sprite Extruder Pro / Ender 3 / S1 / S1 Pro BTT Eddy adjustable Mount

BTT Eddy is a tricky unit to get right. The requirement of the probe to be sitting 1.5-2 mm above the nozzle is a hard window to hit for different nozzle and hot-end configurations available for ender 3 (sprite extruder) models. I have…

Order a print of this model

Printables

Sprite Extruder Filament Cutter

Adapted from the work of @kens96 at the ERCF Community Discord, who in turn based his model off of @TechnikGegg base modules. Accepts the stock Sprite Extruder cooling block and hotend. Modeled with reference from the Kingsidorak Sprite…

Order a print of this model