Phone Sound Amplifier Stand (Mono, Dual, Low Poly)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created a Phone Sound Amplifier Stand (Mono, Dual, Low Poly) for everyone, who need practical stand for phone :-)
- Rating
- 0 / 5
- Likes
- 53
- Downloads
- 420
- Makes
- 0
- Views
- 2,821
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello there. I created a Phone Sound Amplifier Stand (Mono, Dual, Low Poly) for everyone, who need practical stand for Your phone :-)
I decided and I created this “easy printing” model for everyone.
I created entirely by myself and I did 1 universal size, similar to the most common phones on the market. Hole dimensions for phone is cca 79 mm x 14 mm. I did 3 versions of Phone Sound Amplifier Stand (Mono, Dual, Low Poly).
Versions:
- Mono - First model is intended for phones with one speaker on top or bottom side of phone.
- Dual - Second model is intended for phones with two speakers on top and bottom sides of phone. You must print both models - Phone Amplifier Stand Dual Left and Phone Amplifier Stand Dual Right.
- Low Poly- Third model is same like Mono model and is intended for phones with one speaker on top or bottom side of phone, but look little different in Low Poly style
After printing You don't have to use any sandpaper or something like that. If You will print it from Brown filament, You will achieve a “wooden” effect on the print. But if You want the niccest surface, You can use a primer and then repainting.
This models are easy prints, so You don't need to use glue, screews or anything like that.
But if You need some different sizes, You can take my model “Phone Amplifier Stand Mono” or “Phone Amplifier Stand Dual” and resize it as You need.
I personally didn't print it, because I don't need it (I have subwoofer).
I hope You like it :-D
Print settings
Printer Brand:
Prusa
Printers:
i3 MK3S+
Rafts:
No
Supports:
Yes
Distinction:
0.20
Filling:
10 %
Thread Brand:
Prusa
Thread color:
I prefer a Brown, because this color will do “wooden” effect on print
Fiber material:
PLA