4,473 models
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Print approx. €0.85–€1.04 excl. taxPreliminary estimate for PETGSource material: PET
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Print approx. €0.62–€0.76 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Print approx. €7.33–€8.96 excl. taxPreliminary estimate for one variant
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Print approx. €2.22–€2.71 excl. taxPreliminary estimate for one variant
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for whole train 18 pcs - metal axis 30mm x 3mm 17 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
Bendy train track for non-standard curves
Print approx. €6.15–€7.52 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
This is a hinge to attach an acrylic glass door to a wooden frame. The provided objects are for a 10mm wood panel with a 5mm acrylic glass sheet, inset by 5mm. The model contains a spacer to compensate for this 5mm inset. If you have…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for PETGSource material: PET
Use these connectors along with plywood, MDF or other panel products to make modular, customizable and re-configurable furniture. You can make tables, shelves, foot stools, computer monitor stands or other organizers. These are great for…
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
I've designed two different print in place support free axle benders for pinewood derby cars. They are used to bend standard axles, 0.087 inches in diameter by 1 inch long. One is a hardware free version that bends a single angle ~ 3…
Print approx. €2.88–€3.52 excl. taxPreliminary estimate for one variant
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Night in the Woods ring. The inner diameter of…
Print approx. €13.14–€16.06 excl. taxPreliminary estimate for PETGSource material: PET
This model combines a square and a clamp. It would be use to assemble cabinetry, shelves, large boxes, etc. The marks are in centimeters on one side and in inches on the other side. The inside is 140mm x 140mm, the outside is 175mm x 175…
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 1 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
German: Dieser Adapter ermöglicht die Verbindung von Duplo-Steinen mit Holzeisenbahnschienen, ideal für den Bau von Brücken und Abhängen. Der äußere Zapfen wurde modifiziert, um auch auf einen Duplo-Stein zu passen. Verbesserungen:…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
A traditional wooden wagon that's easy to put together, extensible, takes up 2x3 in a 1" grid system, and features a rotating front axle - a fantastic addition to any tabletop campsite, town, dock, or really anywhere you need to liven up…
Print approx. €2.38–€2.90 excl. taxPreliminary estimate for one variant
Introducing the Wood Connector LTX, a heavy-duty solution designed to join rectangular wood pieces for creating robust and custom shelves. Engineered with precision, this connector features durable 3D-printed construction equipped with…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for PETGSource material: PET
Remix of Dom's Peanuts-Woodstock model for freestanding print display. Remix printed with Prusa Pineapple Yellow and Matte Black PLA; 0.20mm Layers; nice 15% infill; no supports. X and Y dimensions can be adjusted to fit display needs. A…
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for one variant
I always felt like most models used unnecessary amounts of filament, so I decided to try and create my own models with less material. It's still reasonably strong and prints quite fast and without supports. Recommended Settings: Material…
Print approx. €1.08–€1.32 excl. taxPreliminary estimate for one variant
Update 2024.01: Added the S-Connector and extra long version for those tracks that just dont fit. Newly designed to be a rapid print and low material version of the loved track sets. If you have these train sets, you know that these…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
A wood drill bit holder for handy storage on a wall.
Print approx. €11.14–€13.62 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have a Classic Wooden Slingshot for you. It is really authentic and shoots well with it. To assemble you need a rubber band and some leather to catch the projectile. You…
Print approx. €3.12–€3.81 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Size: The holes body: Length*Width=110*38 mm; Length*Width=70*20 mm; Easy install Click - NO Bolt, Nut, superglue!
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
I wasn't quite happy with all the existing options so I took ideas from several places and put them together to make just what I was looking for. I hope it fits your needs as well! I designed these to fit my Brio and compatible tracks, so…
Print approx. €8.74–€10.69 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Small, simple and practical holder for storing wooden spoons. Material used: PETG.
Print approx. €1.54–€1.88 excl. taxPreliminary estimate for PETGSource material: PET
V2 version updated added 2/19/2023. Adds a LOT of detail, print comes out much cleaner now.
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Printing: There are no special printing requirements, NO supports . For example 0,05mm layerheight, 2 perimeters, 100% infill. print max 3-4 layers.
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Wanted a simple featherboard for my workbench router and decided that it was better for me to print rather than buy. Fusion 360 files included (but it can get messy when resizing.) I probably could have made the model 1mm thinner and…
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Drill holes to mount to a vertical surface. Use pan-head screws.
Print approx. €3.58–€4.37 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Assembly list of non-printed items for locomotive 2 pcs - metal axis 30mm x 3mm 2 pcs - sphere magnet 8mm If the top part consists of several parts, assemble them first. The top and middle parts need to be glued together. For a more…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Use ASA,ABS, PA6 , print with support easy installation with direct taping screws 2.5mm diameter and 3.5mm screws or epoxy glue
Print approx. €4.45–€5.44 excl. taxPreliminary estimate for one variant
This project is less refined than some. It is sort of a kit bashing project that comes completely from my brain to fill a space on my layout. It was drawn in Fusion360, but I have not included the file as it is very large and is not laid…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Here is my design of straightforward replacements for wooden dowels. I created them for the FFF process to print them using PLA or PETG material. If these dowels are printed with the described settings and in the correct orientation, they…
Print approx. €0.71–€0.86 excl. taxPreliminary estimate for one variant
These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes. They fit standard drill chucks, remember to use low speeds when polishing. The derby wheels I used have the following…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for PETGSource material: PET
No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)
Print approx. €0.84–€1.02 excl. taxPreliminary estimate for one variant
I designed this driftwood piece for my tree frog's tank. It has a natural, organic shape that adds awesome vertical structure to your pet's enclosure! I printed mine in two parts and orientated it vertically to minimize supports and…
Print approx. €9.86–€12.05 excl. taxPreliminary estimate for one variant
Printed with 0.4mm nozzle and layer thickness 0.2mm. No supports. It is the first published model that I have given some extra color by painting. The woodpecker and the spring are own designs, the tree trunk is a remix from Vegetation B -…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
This model allows you to expand or replace tracks in your LIDL/IKEA railway sets. The set includes straight tracks in various lengths from 35 mm to 180 mm and 90° curves. And set also includes curved tracks in various lengths and angles…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
This is a 1/2 standard height bridge for wooden/Brio trains. It can be printed on a Prusa Mini sized print bed and is a gradual enough slope that the trains shouldn't bottom out. Using the included piers, these can be paired to make a…
Print approx. €13.84–€16.92 excl. taxPreliminary estimate for one variant
12th Station of the Cross. Carved Wooden Cross Hackner Religious Art Company, La Crosse, WI. St. Rose Convent of the Sisters of Perpetual Adoration, La Crosse, WI.
Print approx. €2.73–€3.34 excl. taxPreliminary estimate for one variant
Díl spojuje dřevěnou vláčkodráhu a LEGO DUPLO. Přidává možnost postavit nádraží nebo tunel The piece combines a wooden train track and LEGO DUPLO. Adds the ability to build a station or a tunnel.
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
IKEA LILLABO - wood tracks with connector, does not fit BRIO
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
This is a miniature wooden plank bench for doll's houses and the like (...without text in the backrest, as in some of the photos). The bench and backrest are simply slotted together after printing. Print the bench in STL orientation with…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
This is an axle angle gauge for measuring the angle of pinewood derby axles after bending. This gauge is setup for bends ~0.375in from the head of the nail. Print Settings Material: PLA Nozzle Size: 0.4mm Layer Height: 0.2mm Perimeters: 2…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
This is an 8-way junction for use on Wooden railway track similar to Brio and Ikea. The finish is far from perfect but I'm sure it can be improved with changing the Ironing settings
Print approx. €5.98–€7.31 excl. taxPreliminary estimate for one variant
This is what I have made for my kids to play with. Simple design for connecting bambooskewers in diferent directions. You can cut sticks in different lenghts, I have cut them to 8 cm. It is smal part so use brim.
Print approx. €0.81–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a cute Wood Log on Fire keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.22–€0.27 excl. taxPreliminary estimate for one variant
Wheels for the HP OTTO robot using a standard O-ring as a tire. Includes 3 designs for different themes: fire, space, and wooden wheel. For the tire, I used 2× O-ring 50 × 3.5 mm (R29 from a Parkside set). Kola pro HP OTTO robota s…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
Needed to get my new lathe tools off the countertop so they wouldn't bang into each other. Figured I had a huge peg wall in my shop so I used MGX 's peg board program…. https://www.prusaprinters.org/prints/34992-pegstr-pegboard-wizard…
Print approx. €3.81–€4.66 excl. taxPreliminary estimate for PETGSource material: PET
Compatible with Lego bricks and IKEA / Brio wooden tracks. 15 different versions with different lengths and widths.
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
No support / FDM friendly If you have springing reduce the temperature of the nozzle to the maximum (205°c for prusament PLA ) (approx. 28 mm scale)
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for one variant
Measuring tool for wood screws using the imperial system (inch). Measures diameters from #0 to #16. One end of the ruler is chamfered for measuring flat head screws. and the other end is square for all other types. Print with a 0.4 mm…
Print approx. €2.04–€2.49 excl. taxPreliminary estimate for one variant
An organizer for 6 Kenwood food processor cutting disks. Print instructions Check-out the width of the slots for the disks you need to store and adapt them in the fusion 360 model. Print top surface on the bed. No support needed.
Print approx. €8.16–€9.98 excl. taxPreliminary estimate for one variant
The dimensions of the cutting board slots are 18mm for wooden 9mm for IKEA cutting boards Update: I've added a second file for only the IKEA cutting boards. I hope you enjoy this remix!
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for one variant
1-2-3 blocks (metal blocks 1" x 2" x 3" in size, or metric 25mm X 50mm X 75mm) are commonly used in machining. Many woodworkers also use them as a convenient aid for spacing and supporting work. However, machinist 1-2-3 blocks are…
Print approx. €3.13–€3.82 excl. taxPreliminary estimate for PETGSource material: PET
Easy to make a cute Wood Log keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
Outdoor Bench (Dollhouse dimensions) Overview Real outdoor bench I made woodworking, scaled 1:12 for dollhouse dimensions. Incorporates wood texture. 3D Printing Info Material : PLA Infill : 20% Layer height : 0.2 mm Supports : None
Print approx. €1.38–€1.69 excl. taxPreliminary estimate for one variant
Technically this is a remix, but there are not yet printable files available as far as I know. Marius Hornberger (See Youtube) designed a rotary bowl sander to be made from wood. This one had worked very well for me, but I wanted to…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
This model was designed for quick batch printing in PETG with a .6mm nozzle and .4mm layer height, but should work fine with .4mm nozzles too. Tested when printed in PETG, it fits neatly but is still flexible enough for kids to clip and…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
This tool can be used to store the Ponal Express wood glue upside down to ensure that it is not drying and can be used right away when needed. Also it helps to unscrew the cap which tends to be quite immovable when not used for a longer…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Optimized to print well in batches on an FFF-style printer without post-processing. Note the use of sequential printing mode, which avoids inter-wheel strings and the associated surface defects. Also note the use of the ‘Archimedean…
Print approx. €1.35–€1.65 excl. taxPreliminary estimate for one variant
This is an adapter for the kenwood blender addon, where the kenwood machine connects with the blender through a connector with a plastic adapter inside. This is the adapter which is remodeled. It's best to print it in PETG because of…
Print approx. €0.40–€0.49 excl. taxPreliminary estimate for PETGSource material: PET
Simple gender changer for wooden train tracks (e.g. Brio brand)
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
A little bracket for mounting a Brook fighting board to a wood or plywood board. First, use wood screws to attach the 3D printed bracket and then use M3 screws to attach the Brook board to the bracket.
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
This is a miter box jig to hold derby axles that allows a groove to be scored in the nail heads using a hack saw. The is no hardware needed as the clamping force is provided by the user as they grip the handle. To release the axles the…
Print approx. €6.70–€8.19 excl. taxPreliminary estimate for PETGSource material: PET
The 4-in-1 wooden train storage box has four functions in one. It can be used … … to store wooden trains clean and safely, also for transport. … as display socket. … as bridge … as advanced track with dual “polarity” There are two tracks…
Print approx. €6.21–€7.59 excl. taxPreliminary estimate for one variant
Wood chisels holder for Stanley Bailey chisels
Print approx. €7.21–€8.81 excl. taxPreliminary estimate for PETGSource material: PET
Just a pen holder for Stabilo Woody, Allows to hold the pencils, even when they are worn. No support. Best result with ABS Ultrafuse Natural White
Print approx. €1.69–€2.06 excl. taxPreliminary estimate for one variant
This is a tunnel portal (tunnel door) for the existing tunnel elements . It can be connected with the given connectors. It is symmetrical. Connecting two tunnel portals creates a micro-tunnel. H0 Tunnel 1:87 works for Märklin C-Gleis and…
Print approx. €0.08–€0.09 excl. taxPreliminary estimate for one variant
Rectangular Planter with Wood Texture Dimensions: Width: 18 cm Depth: 11.5 cm Height: 10 cm Print Settings (Prusa Slicer 0.25 Structural Preset): Perimeters: 2 Infill: 15% Layer Height: 0.25mm Filament Used: Printed with SUNLU PLA Matte…
Print approx. €11.45–€13.99 excl. taxPreliminary estimate for one variant
Replacement plain 8mm dia. D-shaft knobs for Kenwood CK 405 range cooker. I assume they would work for anything else with that spindle! FreeCAD file included in case you want to add numbers or symbols. I'm still working out how to do…
Print approx. €2.60–€3.18 excl. taxPreliminary estimate for one variant
I bought a Harbor Freight Yukon 60in hardwood workbench for my 3D printer (don't let the raggedy/abused floor models fool you - the drawers work smooth and the bench is sturdy). It was on a great sale and it fit well in the walk in closet…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
I print lying down with supports. The track doesn't need to be supported, but the fibres may come loose.
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
For sets like this: https://www.lidl.de/p/parkside-spezialbohrer-sets-psb-6-a1/p100359846004 I was tired of the drills flying all over the place. This one holds onto the countersinks with little nips and has space for the allen-key and…
Print approx. €6.37–€7.78 excl. taxPreliminary estimate for PETGSource material: PET
Replacement volume knob for the D700 with indicators for knob position. Printed in PETG with a color change. Supports along the outer edge only, not the center. Printed with 0.4 mm nozzle at 0.1 mm layer height.
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
This design is intended to create templates for crafting baby teethers from wood using a router. These templates can also be used to create accessories for a baby gym. However, please note : if 3D printed, these should not be used as baby…
Print approx. €11.07–€13.53 excl. taxPreliminary estimate for one variant
A co-worker wanted some handles for his fathers old hand planer. Printed from Prusament ASA with a 6mm steel rod stringer for the large handle.
Print approx. €10.02–€12.24 excl. taxPreliminary estimate for one variant
Pinewood Derby Car Stand I made this stand to showcase my son's champion pinewood derby car. The car already had a 1/8" hole drilled into the underside use for painting. So I simply fashioned a pin on the mount to hold the car to the…
Print approx. €2.70–€3.30 excl. taxPreliminary estimate for one variant
Case pro baterie 18650, které lze připojit k rádiu Kenwood TH-F7 místo nedostatkových baterií PB-42L. Do původního modelu doplněny mosty.
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
Model je navržen tak, aby byl snadno tisknutelný. Podpěry bude vyžadovat jen lucerna, “sklíčka” i tělo návěstidla jsou tisknutelné bez podpěr. K dispozici je i verze jednostranného návěstidla. Rovněž se snadno sestaví bez lepení. Sklíčka…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for one variant
Designed in fusion360, not much to say, relatively basic, just slice and print. You need to print both, the small and big ones, see pictures for reference. I've used some translucent blue PETG, sliced with default Quality profile, mostly…
Print approx. €4.30–€5.26 excl. taxPreliminary estimate for PETGSource material: PET
This acts as storage and also as toy, teaching our daughter fine motor skills and sorting things by color. Most of the time she's just sitting there moving the pens around and putting them into different holes, instead of actually drawing…
Print approx. €12.61–€15.42 excl. taxPreliminary estimate for one variant
A corner square for assembly of outside 90 corners using glue and nails or glue and screws, makes assembly quick + easy. Features: - Chamfers for sawdust to not skew alignment - Clamping holes - Screw holes for screwing to tablettop for…
Print approx. €12.54–€15.33 excl. taxPreliminary estimate for one variant
📝 Description 🌲 Abstract Minimal Animals – Woodland Power Duo (Low Poly) This set includes two powerful minimalist low-poly animals inspired by the wild woodland: Rhinoceros and Wild Boar . Both models are designed with strong geometric…
Print approx. €1.77–€2.16 excl. taxPreliminary estimate for one variant
Check your local rules to see if balancing can be done, or if there are restrictions on how to balance (such as adding or removing mass). The fixture will require the following additional hardware: Qty 2 - M5 hex nut 16mm or longer M5…
Print approx. €0.69–€0.84 excl. taxPreliminary estimate for one variant
My children often paint with the Stabilo Woody pens, but the supplied organizer is terrible. After seeing the Stabilo Woody 3in1 holder from JayS, which only hold 6 pens, I decided to design my own Penholder for 18 pens. And here is it. I…
Print approx. €14.26–€17.43 excl. taxPreliminary estimate for one variant
A remix of excellent Wooden railway bridge pillar by Honza Sokol. Here are Male-Male and Female-Female variants.
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for PETGSource material: PET
EN - Description Decorative Tissue Box Cover with Wood Pattern for standard tissue boxes, adding a stylish natural look to your home. The box was printed using wood-filled filament containing real wood powder. It provides a natural wooden…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
I saw lots of interesting projects on the internet that connected three wooden rods in a teepee tent style. If you come up with any other interesting ideas, please post a make. Some ideas that I found: sideboard table plant stand jewelry…
Print approx. €2.81–€3.44 excl. taxPreliminary estimate for PETGSource material: PET
Part of the Japanese little Oni mask series - see also Little Coral , Little Sakura , and the elemental series InfernOni , TyphoOni , OniKaze (Air, Wind) DISCLAIMER. It took almost as long to take the supports off this thing than to print…
Print approx. €3.07–€3.75 excl. taxPreliminary estimate for one variant
