1 / 4
Wheel Tuning Clamps for Pinewood Derby Cars — image 1
1 / 4

Wheel Tuning Clamps for Pinewood Derby Cars

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes.

Rating
4.667 / 5
Likes
31
Downloads
246
Makes
3
Views
959
Reviews
3

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

These are some chucks to hold the inner and outer portion of a standard pinewood  derby wheel for tuning purposes.  They fit standard drill chucks, remember to use low speeds when polishing.

The derby wheels I used have the following dimensions:

  • OD of my wheels was 1.185in or 30.099mm

  • ID was 1.045in or 26.543mm

Print Settings

  • Material: PETG

  • Nozzle Size: 0.4mm

  • Layer Height: 0.2mm

  • Perimeters: 4

  • Infill: Gyroid 15%

Required Hardware

  • 2X M3 Hex nut

  • 1X M3 x 20mm SHCS

  • 1X M3 x 25mm SHCS

Encouragement

If you like what I'm doing consider buying me a coffee:

 

Buy me a coffee

Tags