1 / 4
Wheel Tuning Clamps for Pinewood Derby Cars — zdjęcie 1
1 / 4

Wheel Tuning Clamps for Pinewood Derby Cars

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These are some chucks to hold the inner and outer portion of a standard pinewood derby wheel for tuning purposes.

Ocena
4,667 / 5
Polubienia
31
Pobrania
246
Wydruki
3
Wyświetlenia
959
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These are some chucks to hold the inner and outer portion of a standard pinewood  derby wheel for tuning purposes.  They fit standard drill chucks, remember to use low speeds when polishing.

The derby wheels I used have the following dimensions:

  • OD of my wheels was 1.185in or 30.099mm

  • ID was 1.045in or 26.543mm

Print Settings

  • Material: PETG

  • Nozzle Size: 0.4mm

  • Layer Height: 0.2mm

  • Perimeters: 4

  • Infill: Gyroid 15%

Required Hardware

  • 2X M3 Hex nut

  • 1X M3 x 20mm SHCS

  • 1X M3 x 25mm SHCS

Encouragement

If you like what I'm doing consider buying me a coffee:

 

Buy me a coffee

Tagi