255 models
I designed this angled stand for my Samsung T650 sound bar. The soundbar located below the TV and needed to be angled so that to hear the sound better. Updates: Added 2 files: 10 Degree and 20 Degree angles
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
I wanted to mount my Dell soundbar on top of my monitor, so I designed this mount. Soundbar model is AX510. My monitor is Dell E2214H. Should fit most of the Dell monitors. Print instructions Print with supports from build plate only.
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
On the odd chance anyone else has a 50" Vizio TV and 36" Vizio Soundbar. Mounts using OEM leg holes and screws. Print instructions Print with Prusa Slicer defaults and supports everywhere. In Slicer place one onto print bed, place onto…
Print approx. €11.63–€14.21 excl. taxPreliminary estimate for one variant
A while back we bought a soundbar, specifically this soundbar for the bedroom because even a cheap, lower quality soundbar is better than what comes baked into the TV. You can get these on Amazon for like 40 bucks or something. Anywho,…
Print approx. €2.45–€2.99 excl. taxPreliminary estimate for PETGSource material: PET
Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
legs for a soundbar of grunding (DSB 950) Print instructions I've got a soundbar of grunding (DSB 950) and I didn't want to hang him on the wall, In addition it needed to be raised because of all the other elctronic devices. Hardware: 2…
Print approx. €9.97–€12.19 excl. taxPreliminary estimate for PETGSource material: PET
Uchwyty jako półka dla Soundbara
Print approx. €2.55–€3.12 excl. taxPreliminary estimate for one variant
Are you looking to mount a Dell Slim Soundbar SB521A to Dell 24in P2419H Monitor ? Well, Dell doesn't have one. Sure, duct tape, rubber bands, and string could work… but do you really want something that trashy in a world full of 3D…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for PETGSource material: PET
Print the same twice, don't mirror. Not very fancy, but works universally well for weird-shaped soundbars.
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for PETGSource material: PET
Držák na uchycení- SILVERCREST Soundbar Stereo 2.1 - na vrchní část Tv samozřejmě je nutné si první ověřit rozměry vrchní části Tv. Základní rozměry jsou na fotkách, pokud máte například tencí Tv bude chtít držák doupravit ať už úpravou…
Print approx. €1.91–€2.33 excl. taxPreliminary estimate for PETGSource material: PET
This adapter goes in place of the factory supplied stand/feet for the TV. In my case I wanted to mount the soundbar under the TV and the hardware I had wasn't optimal. Remove the feet and bolt on these adapters. There are M8 mounting…
Print approx. €2.69–€3.28 excl. taxPreliminary estimate for one variant
Quasi-Universal Top Mount Soundbar Mount Bracket. Modified bracket to have slide-able M4/M5 screw mounting hole. Most soundbars only have mount holes on the bottom for some reason. This does both top and back. Fits up to ~100mm depth…
This is a printable wall mounting bracket for a Samsung soundbar. Instructions for installation: Attach brackets to soundbar using M4 socket head screws. Hold soundbar centered, beneath tv, 1" lower than where you expect to have the…
This is a Bracket I designed to mount my RCA Soundbar to the wall.
I quickly drew these up to raise my sound bar above my desk so wires can run under it. Print instructions Print it on its side. No supports and I didn't need a brim on my Mini+ with a smooth steel sheet. I also made it ~50% thick to speed…
I want to put my rear speakers on the wall, without spend money in an official rear mount. And I need that wall mount should be easy to remove the speakers. Then I made it. Is necessary put the bottom to avoid torque in the mount. Maybe…
Support murale pour la Samsung Remote AH56-02692C (Peut-être compatible avec d'autres modèles de télécommande samsung)
I designed this mount so that I could hang a Dell AC511 soundbar from the VESA mount on the back of the Dell U4021QW ultrawide LCD monitor. This mount won't work with the Dell monitor stand. See my other models for a version of the mount…
Samsung speaker stand. HW-Q930C soundbar. Steel tube with a diameter of 19mm.
Wall mount brackets for the Samsung C400
These are an improved version of the wall mount brackets for a Vizio soundbar. These are based on the mounts that came with model SB36512 but will probably work for other models. The original brackets had an open back which dug into my…
A quick and easy way to move your soundbar to above your tv.
A vesa mount to mount your Creative Stage soundbar to your monitor. Can be printed without supports and requires 4x M4 screws to mount. I removed the feet and wall brackets from the back to be able to slide the brackets on. I also…
Low cost stands for Bose Soundbar 700. I wanted it to be raised so i could place it closer to my TV. printed it without supports and with 15% infill
DELL ac511 soundbar mount. DELL ac511 držiak na zvukovú lištu
I've developed a wall-mounted remote holder designed to neatly organize up to three remotes for your TV, light, and soundbar. The holder is crafted for optimal durability and flexibility using PETG material. For easy installation, it's…
I needed something to fit my bose solo soundbar on my desk, without wasting to much space. So I designed this simple stand and it looks pretty good. I can fit my soundbar under my ultra wide 42" screen and a USB-C dock underneath.
A simple 10º angled stand for the Vizio SB2020N-J6 soundbar, it has a bumped corner to align the equipment's front side, I've added clear rubber pads on the bottom to prevent the stand from sliding. Printed on: PLA Infill: 15% Fil. Brand:…
Simple Z-shaped stand for Samsung HW-Q700A soundbar. Raises soundbar center unit 220mm above media cabinet to get it closer to ear level. The stand is attached on each side to mounting hole with M4x10 screws that came with soundbar. You…
Small L-Bracket to mount a Samsung Sound Bar models HW-K360 or HW-KM36 or HW-KM36C. Print in quantity 2 in your favorite material. Add the screws from underneath (M4x0.7), mark where you want to mount it to the wall, screw it to the wall…
I've remixed rpanachi's great design which uses the screw holes previously used with the TV's feet. I've adapted it to fit my TV and Soundbar. I've also added cable management loops that snugly fit my HDMI and power cables. The dimensions…
I wanted to mount my rear speakers high up, but angle them downwards. This is a nice and sturdy mount that uses the existing mounting hardware that screws into the back of the speakers. Category: Electronics
As I didn't find a mount for the Bose TV Speaker online, I made one - may someone else needs it too. Saved 25€ and the shipping time. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 1 Infill: 100…
Balance the weight out with two screws! Recommend printing on the oval face (lying down) for strength, and increasing perimeter count. Installation instructions to get both screws in for both sides: place the two sides on the extreme ends…
After having used my first bose soundbar mount for the CHIQ Television for some weeks, the TV broke. Now I bought a new LG TV which is not having any possibility to mount some self printed part directly to the TV without drilling any…
Designed this bracket, designed to print in a pair, that holds my soundbar across the top of my TV down at a slight angle towards the couch. Printed in PETG at 25% infill. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
I decided to buy a Dell Soundbar because it looked perfect for my desktop setup. I found out they're only supposed to clip onto Dell monitors. I've got an HP monitor. (Specific model for width checking: HP Pavilion 23xi) 3D printing to…
I wanted an easy way to place a holder for Samsung remotes on any of the shelves in my living room. The design uses 10x4mm cylinder magnets under a TPU or other flexible filament cover. Glue was used to secure the cover on top of the…
This is a small shelf with adjustable legs designed to go on top of a TV. You can use it for, remotes, set to boxes (appletv, roku, etc…) I have prented 2 and use them to hold up my ound bar.
After VESA mounting my TV on the living room wall I needed a way to hang the soundbar also. I decided the best way to attach it was to print a pair of brackets that would snug fit the soundbar between them using the existing screws and…
This mount holds a Vizio Sound Bar under my TV stand to hide it out of sight. One version has holes, else use VHB tape. I printed it using PLA and did 3-4 walls and no top of bottom layers to expose the infill. When Using VHB tape, sand…
Wall Holder for the VIZIO - 5.1.2 M-Series Soundbar Remote. It uses double-sided mounting tape to hold to a wall. The bottom surface is also flat so you can use it to adhere to something else like a table or self. No supports are not…
This is a bracket to mount a Vizio 38" soundbar (model SB3820-C6) on a Vizio 55" TV (model M55-D0). The mount fits by friction into the vent on the back of the TV. There is a screw hole for the mounting screws on the soundbar. Maybe…
Support designed for Samsung Soundbar HW-K360 to fit on stand holes of TV Samsung 49KS7000. It's a very tight fit, so it holds the soundbar weight without problem. Category: Household
I really like my Edifier M200 soundbar. Has USB signal/charging & bluetooth so it's perfect for my setup, using with the PC & laptop in my home office. But…i wanted a way to get it right under my monitor, so it won't get in the way on my…
Recently purchased a Vizio soundbar/ subwoofer system and wanted to mount the soundbar to our 55" Vizio tv so that it would be directed at us when we move the tv away from the wall. Because the tv stand inserts are near the edge of our tv…
I use my creative stage air v2 via usb c to my desktop under my monitor. The soundbar needed to be raised a bit to allow for keyboard wire to pass under it also so that the monitor base could fit under it. I push my soundbar all the way…
Remote Control Holder - fits LG smart TV holder + soundbar remote controler.
I have my TV (Samsung UN40J5200AF) wall mounted. I wanted to have the soundbar (Samsung HW-M360) mounted under it in order to sound better when the TV gets pulled out and turned to the sides. This probably won't be of any use for anyone…
Wall Mount for lg Soundbar. This soundbarholder get your soundbar away from your wall so you can hide cables behind it. Category: Audio
Couldn't find any existing designs for my use case. I wanted to mount my soundbar to my LG widescreen monitor to free up desk space. sunny_raven has the only VESA mount I could find so I decided to build off of it. Specific changes:…
Instructions: Print 2 of the T-pieces, super glue at the spacing needed to fit in the mounting holes
Stand for my soundbar Creative Stage SE to angle it for better sound. 3 parts that can be connected. All parts fit on one plate of my p1p. Some indents for feets on the bottom.
Just a simple bracket for mounting the common Bose TV Speaker to the wall, the bracket has a 5 degrees angle to direct the soundbar slightly downwards. The model this is designed for: Bose TV Speaker Print on its side for maximum…
The stock wall mounts that came in the Samsung package made the unit sag down (yes, it was in a wall stud). So I made a custom mount that also has a couple Wii Sensor Bar slots to help free up my entertainment center. (Stud finding is…
Recently updated my living room soundbar, which meant I needed a new mount for the remote! Designed to be printed in PLA. There's a cutout on the rear to install double sided tape or similar adhesive strip and a countersunk hole for a #6…
The last of my remote control holders (for now.) This one's designed for the remote for a Bose soundbar from 2019. The remote in question is pretty generic rectangular membrane thingy though so I'd wager that it works for quite a few…
Mount your soundbar beneath your LG TV - no drilling required. This 3D-printable clip-on bracket set attaches securely using the same two screws as the TV’s legs , providing sturdy support for most soundbars and a sleek, wall-free…
Compatibility Note I'm not sure if the same stand mounts are used across the Hisense product lines, or if it is only a small subset of TVs. Other mounts (for another soundbar or different accessory) can be designed to attach to the same…
Support / Mount for the Dell Soundbar model SB522A Made for the monitor dell P2419H ( which has an angle at the bottom, 19 degrees ) but you can change the step file for the monitor you have. I used a 10 x 4 neodymium magnet to make the…
The feet fit into the existing mounting point of the Samsung HW-Q995GC (and maybe other models?). You need the original screws of the wall mounting. I reserved space under the feet for these rubber pads: X-Protector Antirutsch Pads 8…
Designed to hold your Samsung Soundbar remote, my remote is from my Samsung HW-Q700A, but it may work for others. The remote model is AH59-02767C for your reference. The remote fits very snug when printed at 100% scale, I'd suggest to try…
I added thin rubber to the bottom of the print, to keep it from sliding around
Made to mount my 2016 Samsung Sound Bar behind my new TV, and ran some Fusion tests on it, and turns out it can support upwards of 15 pounds when mounted properly. I recommend using two for redundancy and to support it better, but you…
Created this bracket for my Samsung HW-MM55C 39.8" 3.1 Channel Soundbar to mount it on top of the TV (a Samsung 55" LED set) because I didn't have space below the TV. Bracket fastens to the back of the TV using the same holes you would…
Made this angled soundbar stand for my Samsung HW-Q930B soundbar
Hanging mount for soundbar using VESA standard and original hanging points of soundbar. Designed with 32" TCL tv and Ultimea Poseidon D60 soundbar, but dimensions and shape are customizable for any VESA and soundbar. Go to OnShape…
TCL Roku TV & Alto 6+ Soundbar Wall Remote Holder… holds both remotes and mounts to wall with 3M adhesive. Enough said. :-)
Needed slimmer feet to fit it inside a tight space under my TV closet.
Remote holder for Samsung Remote AH59-02692P mit oder ohne Locher zum Schrauben
Angeled stand for soundbar or music box. Used it for Teufel Cinebar One. Printed with TPU Bambulab A1
Just a fast designed part to mount our BOSE soundbar directly under CHIQ TV which is mounted at the wall. I don't want to drill more holes into the wall so I decided to mount it directly under the television. Please print in PETG or…
Description: This set includes two rear speaker supports for Samsung soundbars. The Avatron Style is designed specifically for the Samsung Q930, matching the original Avatron support (see reference link). The Universal Pole Style is a…
i needed to lift my sound bar above my monitor stand after getting an new ultra-wide monitor. Super simple model. I printed in PLA with a 0.6 nozzle at 0.3mm layer height and 10% infill. These fit the rubber feet on the bottom of my…
I really hated the look of the raw JBL 5.1 soundbar with the two satellites detached, so I created covers for the main bar.
Needed to raise my Katana Soundbar over my monitor stand. Just in case its useful to someone else i've put it on here. Screws in as the originals do. Finish off with felt on the bottom to avoid scratching your desk. Ive also made a set of…
This is a bracket to screw on Samsung TV QN85 to sustain beneath it Samsung Sound Bar M450 M series.
Feel free to remix it as it's just a mounting part. You can: 1.print this,use some super glue to stick your stuff with the mount part and attach to the monitor 2.design your remix using this as a mounting part Print instructions Category:…
Vizio Soundbar Wall Mount Bracket This is a simple wall-mount bracket for a Vizio 3.1/5.1 Soundbar, offset from the wall to allow easier access to the rear ports, and to allow for some cable management. This is compatible with the older…
Invisible low profile wall mount to let directly attach the sound system.
Simple Feet for my Samsung T6 Soundbar. Lifts the soundbar up to go over my Samsung TV Stand. Made to fit screwholes on the bottom of the soundbar for a fixed position. Can be printed without supports.
This is a pair of support brackets that allow to mount a Lenco SB-080 soundbar just below the screen of a Sony Bravia KD-43XH81. The brackets mount to the TV where the stands would usually be, so obviously you will need to wall-mount your…
Dodaję podstawkę umożliwiającą montaż soundbar-a pod TV Philips model 7500, 55 Cali. Dodatkowo zapraszam do głównego projektu: https://www.printables.com/model/310442-projekt-magazynu-lg-ncm-e78-uklad-14s11p - Jeżeli chciałbyś zapoznać…
I picked up the Creative Stage V2 2.1 soundbar and subwoofer for my desktop PC. I won't leave any links because I'm pretty sure big companies like this can pay their sales force easily enough without me chipping in for free. If you're in…
Ikea Skadis holder for the flat remote control of the ‘Creative Sound Blaster X Katana’ soundbar. Should also fit other flat remote controls. The dimension of the bag is 43.5x7.5mm -------------------------------------------------- Ikea…
These should be pretty strong for their purpose. Mount to your soundbar with appropriate M4 screws. Mount to the Mantelmount frame with flat head M5 Screws, washers, and nuts, or equivalent. If you leave the M5 screws barely loose, you…
UPDATE 11/16/22: This print had creep over time and failed eventually. I printed it again with 100% infill and it snapped again eventually. I would not recommend using PLA for this. I ended up making a mount out of some angle iron from…
Bose Solo 5 mount for this tv stand: https://www.amazon.nl/-/en/gp/product/B07XRJ347J/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 The bolts feed through the two parts into the soundbar mounting threads. Onshape document:…
sound bar design I did up to make use out of an old pair of pc speakers that no longer worked I added a picture of the set of speakers i used but you could substitute your own speakers and amplifier board from amazon. there is even plenty…
LG soundbar S95TR rear speakers addon suitable for NorStone Finn edge speakers stands. Printed with: PETG 5 walls 50% infill (grid) I use this clips for cable managment. * You will need slightly longer screws than the ones that come with…
A simple set of stands that can be used to raise up a soundbar. It's specifically intended for the Sonos Arc, but will probably work with plenty of other soundbars as well. Requires a little bit of supports, but by positioning the model…
I made a holder for my LG Soundbar S60TR rear speakers to use the existing screws I had on the wall, that were 8cm spaced. It holds any 10.3 cm wide volume and theres a hole for wiring in the bottom The project can be fount at:…
This allows the soundbar to fit over some of the monitor stands having a V shaped front part, like the LG Gamer one my wife has. I uploaded two designs I made for the same purpose, maybe good for inspiration for other designs. I could…
Brackets for Denon soundbar mounting under hanged Phillips TV
This is for the Onn. Soundbar. It's designed to be extremely study and secure. Originally designed for in a camper to withstand bumps and jolts. This is the most secure wall mount for the Onn. Soundbar available. Slip onto the end of your…
A mount I designed for my moms Samsung TV and her Sony soundbar
So i recently bought a used soundbar for my tv and wanted it as slim as possible, so this is the mount i made. I found that it was possible to mount something to the TV on the back through these small holes. The screws used are M5 for the…
These raised, replacement TV feet provide some extra clearance under your Philips TV. They lift your TV high enough to place a soundbar under the TV, instead of in front of it. It saves some space and makes your setup look clean and…
Wall mount for LG SC9S Soundbar. System preset : 0,20mm Strength Infill 25% Pattern : Grid You need: 4x M6x40 screw for wall mount 4x M8x40mm wall plug 2x M4x20mm from soundbar secure
![Ultimea D60 soundbar VESA TV mount [CONFIGURABLE]](https://media.printables.com/media/prints/1235146/images/9259070_30c6d1de-34c7-40b2-943c-0a3d5c11e653_4b632cfc-2fc9-4b02-8671-f39221c494c4/large_display_side_1235146.jpg)
