Soundbar Mount (Majority Bowfell)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.45 – €2.99 net (excluding VAT)
For file: CE3_SoundbarHolder.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.72 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 3.5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A wall mount for a cheap soundbar we found on Amazon a while back.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 72
- Makes
- 1
- Views
- 745
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution
A while back we bought a soundbar, specifically this soundbar for the bedroom because even a cheap, lower quality soundbar is better than what comes baked into the TV. You can get these on Amazon for like 40 bucks or something.
Anywho, fast forward and now we have a ceiling mounted TV and a strange mounting requirement for the soundbar so, I made this.
Print with ABS, or PET as PLA is not flexible enough.