Dell Soundbar SB522A Support / Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support / Mount for the Dell Soundbar model SB522A
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 77
- Makes
- 1
- Views
- 2,012
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Support / Mount for the Dell Soundbar model SB522A
Made for the monitor dell P2419H ( which has an angle at the bottom, 19 degrees ) but you can change the step file for the monitor you have. I used a 10 x 4 neodymium magnet to make the soundbar attach to the mount but you can use an iron plate or other kind of magnet. To hold the mount on the monitor I used double sided 3M tape.
The worst part is designing the hole that the soundbar magnet holds onto the mount / monitor, but it's done! Enjoy
Print like as shown on the 3mf file, use the specified side as a base.
Print details:
- Material: PETG
- Layer height: 0.2 mm
- Supports: I used but maybe you don't have to.
- Infill: 15%