Dell Soundbar SB522A Support / Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support / Mount for the Dell Soundbar model SB522A
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 2006
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Support / Mount for the Dell Soundbar model SB522A
Made for the monitor dell P2419H ( which has an angle at the bottom, 19 degrees ) but you can change the step file for the monitor you have. I used a 10 x 4 neodymium magnet to make the soundbar attach to the mount but you can use an iron plate or other kind of magnet. To hold the mount on the monitor I used double sided 3M tape.
The worst part is designing the hole that the soundbar magnet holds onto the mount / monitor, but it's done! Enjoy
Print like as shown on the 3mf file, use the specified side as a base.
Print details:
- Material: PETG
- Layer height: 0.2 mm
- Supports: I used but maybe you don't have to.
- Infill: 15%