NexGen3D: Bose TV Speaker and Soundbar Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple bracket to mount the Bose TV Speaker to the wall
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 93
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
Just a simple bracket for mounting the common Bose TV Speaker to the wall, the bracket has a 5 degrees angle to direct the soundbar slightly downwards.
The model this is designed for: Bose TV Speaker
Print on its side for maximum strength, I would use 4 to 6 walls, depending on the material, mine was done in PC-CF, but PLA+ should be okay if your house is not that warm:

Parts Required:
- 2 x M5 x 14mm Button Head Socket Bolts (For the TV Speaker itself)
- For the wall side, use whatever floats your boat, holes are 6mm diameter, I just used some 8mm wall plugs with 5mm self tappers.
According to BOSE, this mount should also fit the following products, but you may need to print in ABS/ACA with more walls if the Soundbar is large, I have no idea how much heavier these are:
- Bose Smart Ultra Soundbar
- Bose Smart Soundbar 600
- Bose Smart Soundbar 900B
- Bose Smart Soundbar 300
- Bose TV Speaker
- Bose Smart Soundbar 700
- Bose Soundbar 500
- SoundTouch 300 soundbar
If you have a fear of your bar being to heavy, then let me know and I can beef it up for you.