NexGen3D: Bose TV Speaker and Soundbar Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple bracket to mount the Bose TV Speaker to the wall
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a simple bracket for mounting the common Bose TV Speaker to the wall, the bracket has a 5 degrees angle to direct the soundbar slightly downwards.
The model this is designed for: Bose TV Speaker
Print on its side for maximum strength, I would use 4 to 6 walls, depending on the material, mine was done in PC-CF, but PLA+ should be okay if your house is not that warm:

Parts Required:
- 2 x M5 x 14mm Button Head Socket Bolts (For the TV Speaker itself)
- For the wall side, use whatever floats your boat, holes are 6mm diameter, I just used some 8mm wall plugs with 5mm self tappers.
According to BOSE, this mount should also fit the following products, but you may need to print in ABS/ACA with more walls if the Soundbar is large, I have no idea how much heavier these are:
- Bose Smart Ultra Soundbar
- Bose Smart Soundbar 600
- Bose Smart Soundbar 900B
- Bose Smart Soundbar 300
- Bose TV Speaker
- Bose Smart Soundbar 700
- Bose Soundbar 500
- SoundTouch 300 soundbar
If you have a fear of your bar being to heavy, then let me know and I can beef it up for you.