Ender 3 S1 Pro 5015 Fan Cooler and MPU 9250 Holder -Sprite Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Better cooling performance, better looking, easy to print. Compitable with all sprite extruder releated 3D printers.
- Ocena
- 4,5 / 5
- Polubienia
- 140
- Pobrania
- 653
- Wydruki
- 5
- Wyświetlenia
- 5407
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Update:
v2
Offset mod for Touch Sensor added. (Last photo)
Offset Values added.
Setup:
You can find pdf document in the attachments for this.
Printing:
You have to use PETG or a heat resisdant filament to work properly. You can choose any layer height. For supports: select ‘Support on buildplate only’ option. You can see the oriantation in the pictures.
Offset values for klipper or stock firmware.
Touch Sensor in the front:
x_offset: 0
y_offset: -55.15
Touch Sensor offset mod:
x_offset: -46.8
y_offset: -40.5
Note:
Since the leveling sensor is in a different offset. 2 cm end partition of the heat bed on the Y axis can not be measured due to moving limits. I never printed that big, so no problem for me. Even though, it will not be a problem if you want to print that big, since only thing will not be available should be bed leveling compensation.