1 / 16
LiteBurner KE - Ender 3 V3 KE Dual 5015 Fan Shroud — zdjęcie 1
1 / 16

LiteBurner KE - Ender 3 V3 KE Dual 5015 Fan Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ender 3 V3 KE Dual 5015 Blower Fan Shroud

Ocena
5 / 5
Polubienia
489
Pobrania
1439
Wydruki
19
Wyświetlenia
16 626
Oceny
10

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

LiteBurner KE

 

Join my discord! https://discord.gg/uYBuFXUmcU



I couldn't find anything I liked , so I made my own design. It accommodates 2x 5015 blowers and is designed to be printed without supports. On the right side, there's a slot for a 24V LED light. I purchased 5 LEDs for $4 on Aliexpress. It can be powered by tapping into the hotend cooling fan's power supply. The lighting is very bright and works well. 

 

The design also allows space for a 4020 fan in the center, using an adapter. I'm currently using this one for my setup:
(https://www.printables.com/model/718283-ender-3-v3-se-25-40mm-fan-bracket-low-profile) 


Check https://github.com/iamlite/liteburner for information about the LED ring. 
 

Links


 

Assembly Instructions

 

1. Connect the ducts to the main body pieces.

2. Attach the 24V LED to the right body piece.

3. Use two M3 x 4 screws to attach the body pieces to your assembly. Insert the faceplate before tightening the screws, as it is held in place by the pressure from both sides.

4. Once the left and right body pieces and the faceplate are in position, secure everything with 2x M3 L10 screws and attach your fans.

 

Bill of Materials (BOM)

  • 2x M3 L4 Flat Head Screws
  • 2x M3 L10 Screws
  • 4x M3 L20 Screws
  • 2x 5015 24V Blowers
 
Optional:
  •   1x 24V LED
  •   1x 8Bit WS2812 LED Ring

 

Print Settings

  • Material: Ideally use something other than PLA; I used PETG.
  • Supports: None required. If using Orca slicer, the auto-orient feature does all the work for you.
  • Walls: Use at least 3 walls.


 

Tagi