4010 Fan DIN Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy snap-on DIN mount for standard 4010 fans. Will probably work for any 40XX fan.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 286
- Wydruki
- 5
- Wyświetlenia
- 1306
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Based on the ingenious design by [jwags55](https://www.thingiverse.com/jwags55). This remix is designed to fit standard 4010 fans (with or without built-in nut traps). It should be a tight fit on 35mm DIN Rails and hold the fan securely. Use 2-4 M3 16mm Bolts and nuts to secure the fan to the mount. *Note: It's really easy for me to tune the parameters so if it's too loose/tight let me know in the comments and I can make some adjustments.*
**Features**
* Snap fits to DIN rail
* Works with PLA
* Mount the fan in either direction
* Includes nut traps (will also work with fans that have built-in nut traps)
* Easy and fast to print (No supports, not even for the inset nut traps)
**Printing Tips**
* Use 4 perimeters
* 4 Top/Bottom layers
* 20% Gyroid infill