1 / 6
BIQU H2 V2S Lite Mount, Duct, BL Touch, Fil Runout for CR10 V2 V3 — zdjęcie 1
1 / 6

BIQU H2 V2S Lite Mount, Duct, BL Touch, Fil Runout for CR10 V2 V3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Full mount for Biqu BTT H2 V2S Lite high flow hotend for CR10 V2 or V3. Uses BL Touch, OEM Filament runout.

Ocena
0 / 5
Polubienia
12
Pobrania
103
Wydruki
0
Wyświetlenia
1314
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Modified the original backing plate by FHOGPHIL to include mounting for the OEM filament runout sensor from a CR10 V2 or V3. 

Modified the BTT supplied fan duct to work in conjunction with a new BL Touch mount and also allow access to the feed wheel blocked by the original design. 

Utilizes 624 ZZ U Groove bearings (optional) as filament guides to meet the runout sensor. It is recommended to disable filament unload in Marlin to prevent unloading into the sensor. 

Modified Marlin for CR10 V2 w/SKR 3 v3, H2 V2S Lite Hotend, TFT35 E3 v3, BL Touch:
https://github.com/dmarafino/Marlin2.1.2Hotfix-CR10-SKR3

S3DP Fan Breakout Board:
https://syracuse3dprinting.com/product/s3dp-fcm-fan-control-module/

Probe Offsets:
#define NOZZLE_TO_PROBE_OFFSET { 40.70, -24.86, -2.6 }

Fan duct remixed from:
https://github.com/bigtreetech/H2-Series/tree/master/H2%20V2s%20Lite

Backing plate remixed from:
https://www.printables.com/model/223469-biqu-h2-system-for-cr-10-v2-or-v3 
 

It is highly recommended to print these mounts in a high grade material like PETG, ASA, PC, or ABS

 

Required for installation: 

Tagi