1 / 4
SW2 BIQU H2 V2S REVO Carriage Mount, fan duct 5015 and BiQu MicroProbe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of the model to take into account the BiQu MicroProbe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 986
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (7)Powiązane
This is a redesign of the model to take into account the BiQu MicroProbe.
You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery.
The assembly is planned for a 5015 blower.
For the attachment on the cover, you will need a rubber band of the same thickness as the original one.
Printed in PETG in 0.16mm.
If Probe you need a
M851 X0.0000 Y-50.0000
Update 26/02/2023
- Change blower position so that the air flow is centered at the outlet.
- Lowering the Fanduct to 2mm above the nozzle.
List of parts needed for the 3D model :
- Insert with Head, M3X4.8 (2 units, 2 for the fanduct)
- Insert with Head, M2.5X5, (2 units, 2 for Bltouch)