P
PrintablesLAYDN
BIQU Microprobe Model - STL & STEP
BIQU Microprobe STL and STEP file. Found it on the BTT GitHub.
- Pobrania
- 1055
- Polubienia
- 34
- Ocena
- 5
Wyniki wyszukiwania: microprobe
Liczymy pasujące modele…
P
PrintablesEric San Mateo
BIQU Microprobe adapter
This is a simple adapter so that the Biqu Microprobe can be mounted on the mounting points made for a CR Touch or a BL Touch. It is essentially an extender, since the microprobe is significantly smaller in height than the usual suspects.…
- Pobrania
- 611
- Polubienia
- 42
- Ocena
- 5
P
Printables3Dwork.io
BIQU Hurakan - H2 / H2 V2S REVO / H2 V2S Lite - MicroProbe holder
To adapt our BIQU Hurakan to use H2 V2S REVO we need to adapt BIQU MicroProbe sensor using this universal BIQU MicroProbe for all H2 extruders series. Klipper configuration changes: [probe] ... x_offset: 4 y_offset: -32 ... [safe_z_home]…
- Pobrania
- 500
- Polubienia
- 51
- Ocena
- 4,75
P
PrintablesRahmah12
BugBu Biqu Microprobe Mount
Drop in and Adjustable only change I had to make was my X had to be Changed to -35 from the default -28. Just be sure to double check! Will need 2 x M2.5 x 10 and 2 M2.5 nuts for mounting.
- Pobrania
- 457
- Polubienia
- 34
- Ocena
- 5
P
Printablesdetos
Biqu microprobe ender 3v2 bracket +firmware
You can use a z offset like -2.30, it's a standard for this braket. The firmware is already compiled and you can flash the printer easy, dont forgot to flash the display, it's easy. all files is included. The model it's easy to print, i…
- Pobrania
- 411
- Polubienia
- 12
- Ocena
- 0
P
PrintablesPraetorianCZ
BIQU H2 V2S Lite BLTouch / 3D Touch /MicroProbe mount
Simple BLTouch/3DTouch/MicroProbe mount for your BIQU H2 V2S lite extruder. Assembly: Just use two washers between the fan and the mount (as seen in pictures) BL/3D Touch Offset: x: -32 y: +2 MicroProbe Offset: x: -29 y: +2 Printed…
- Pobrania
- 410
- Polubienia
- 37
- Ocena
- 0
P
Printablesdjos_1475
Voron StealthBurner Mount for Biqu / BTT MicroProbe
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a…
- Pobrania
- 381
- Polubienia
- 41
- Ocena
- 4,67
P
PrintablesFlubber2.0
Biqu microprobe adapter
this is a simple adapter from a crtouch/bltouch to a biqu microprobe. It uses the two m2.5x5 screws that come with the biqu microprobe and two m3x6-m3x8 screws. 4-20-2024 M2.5 screws didnt fit so i updated the design 4-20-2024 apparently…
- Pobrania
- 350
- Polubienia
- 31
- Ocena
- 5
P
Printablesmtczekajlo
Dragon Burner BIQU MicroProbe
Dragon Burner remix for BIQU MicroProbe. OnShape: https://cad.onshape.com/documents/60a28a4c34972125e94cdbc3 Offsets (from OnShape): X: 32.475 mm Y: -12.468 mm
- Pobrania
- 343
- Polubienia
- 60
- Ocena
- 5
P
Printablesscrith
BIQU H2 V2S Compact Mount for Ender 3 Pro and MicroProbe v2 or BL Touch
A compact mounting solution for a dual 5015 fan with clear nozzle view, and use of the original metal BL Touch bracket. I found the Pudgy fan duct and really liked the look of it but found that it could be improved in some areas. Part of…
- Pobrania
- 311
- Polubienia
- 45
- Ocena
- 0
P
Printablesaeropic
BTT/BIQU microprobe on QIDI Q1 pro
This is : a support for BIQU/BTT microprobe to adapt it on the QIDI Q1 pro. a description how to install it on the printer a description of the modifications in the printer.cfg and gcode_macro.cfg files The QIDI levelling system works…
- Pobrania
- 298
- Polubienia
- 50
- Ocena
- 5
P
PrintablesFlubber2.0
Biqu microprobe ender 3 pro mount
I didn't get the original ender 3 pro mount because the reseller didn't have the option. I also couldn't find any good fitting designs made by others so I designed my own. i have the microprobe v2 and saw that the nozzle touched the bed…
- Pobrania
- 256
- Polubienia
- 12
- Ocena
- 5
P
PrintablesCiareCw455
Carcasa Artillery X4 PRO X4 plus con soporte microprobe v2
Nueva Version: https://www.printables.com/es/model/930869-mount-microprobe-v2-for-the-artillery-x4-pro-plus Carcasa rediseñada para artillery x4 pro y plus con soporte para sensor nivel microprobe V2. Mejorado sistema de flujo de aire del…
- Pobrania
- 242
- Polubienia
- 19
- Ocena
- 5
P
PrintablesCrooksUSA
BTT MicroProbe to BLTouch / CR-Touch Adapter
2/15/26 - UPDATE: Added an adapter to go from Creality CR-Touch to BTT MicroProbe, based off of user feedback (untested by myself). This is an adapter to mount a BTT MicroProbe in place of a BLTouch V3.1 (might also work to replace a…
- Pobrania
- 219
- Polubienia
- 15
- Ocena
- 5
P
Printablespellcorp
K1 BIQU Microprobe mount remix
BTT Microprobe mount for the K1 Use this model with my Simple AF project: https://pellcorp.github.io/creality-wiki/microprobe/
- Pobrania
- 218
- Polubienia
- 20
- Ocena
- 5
P
PrintablesNarddDawgg
Biqu Microprobe V2 - Ender 3
I needed a low profile mount for a Biqu Microprobe V2 on my current toolhead setup, this has been designed to fit behind my modified backplate for Bosco Lau's magnetic cooling duct . It should clear their original design as well. This…
- Pobrania
- 183
- Polubienia
- 15
- Ocena
- 0
P
PrintablesTeknikFrik
Sovol SV08 BIQU Microprobe Mount (Stock or Neptune 4 Max nozzles)
NOTE: The pin on my BIQU Microprobe unscrewed itself after several prints - probably due to vibration. The pin can be unscrewed (see photo) and some loctite applied to the threads before screwing it back in. I've tested this a while now…
- Pobrania
- 175
- Polubienia
- 40
- Ocena
- 5
P
Printablessouthernky3d
Biqu H2V2S Microprobe Fan Grille mount
After scouring the web i couldnt find a mount specific to my needs so I ran off to design it on my own, Designed 100% in Tinkercad by me. Printed in PLA+ and ZERO supports needed This mount will allow you to mount a Microprobe on the…
- Pobrania
- 167
- Polubienia
- 13
- Ocena
- 0
P
PrintablesEvgenius
Qidi Q1 PRO BTT MicroProbe mount
NEW version V2! Новая версия V2! This is a simple mount for the BTT MicroProbe. This mod first of all corrects the terrible mistake of QIDI Tech by placing an inductive sensor in the active thermal chamber without compensation for…
- Pobrania
- 160
- Polubienia
- 27
- Ocena
- 0
P
PrintablesDirtFarmerIndustries
BIQU/ BTT MicroProbe to CRTouch Adapter
Simple adapter to mount a BIQU / BTT Microprobe to your existing CRTouch bracket.
- Pobrania
- 154
- Polubienia
- 18
- Ocena
- 0
P
PrintablesVariant13
FBG6 BIQU Microprobe mount
To mount BIQU Microprobe to your Flying Bear Ghost 6 print this back cover and install it in place of the original. Print it from some heat resistant filament such as ABS. It is designed to be printed in a vertical orientation to make…
- Pobrania
- 153
- Polubienia
- 16
- Ocena
- 5
P
PrintablesStarCom Lab
MicroProbe v2 Adapter for K1 Series
What is this? Adapter (v5) for mounting in a standard place under the Lidar - table card removal probe from BTT BIQU MicroProbe v1/2. What is needed? 1. Auto-level sensor BIQU MicroProbe v2. ( https://sl.aliexpress.ru/p?key=k0b2Of8 ) 2.…
- Pobrania
- 152
- Polubienia
- 11
- Ocena
- 0
P
Printableslayer.shifted
Biqu MicroProbe v2.0 Adapter (Neptune 4 Series + LS Fanmod)
This Adapter adds support for the BIQU MicroProbe v2.0 to Neptune 4 Series Printers and is also compatible with LayerShifted-Fanmod for the N4 Series Printers. May be incompatible with the fanbar! The holes are pre-threaded in the file to…
- Pobrania
- 140
- Polubienia
- 24
- Ocena
- 0
P
PrintablesCiareCw455
Mount Microprobe V2 for the Artillery x4 pro / plus
Actualización 22-12-2024: añadido archivo step Nuevo soporte para cabezal de la Artillery X4 Pro y Plus. Se mantiene la compatibilidad de la carcasa original, eliminando el sensor inductivo original y añadiendo el sensor Microprobe v2.…
- Pobrania
- 134
- Polubienia
- 13
- Ocena
- 0
P
Printablesagio26
MicroProbe v2.0 BIQU B1 adapter
Nozzle-to-Probe offsets { X, Y, Z } NOZZLE_TO_PROBE_OFFSET { 0, -37, -0.45 } //example // the last value " -0.45" will depend on how low or high you will adjust the adapter with the screws But all the values can be found very easily. Make…
- Pobrania
- 129
- Polubienia
- 14
- Ocena
- 0
P
Printablesaadfg dsadg
Biqu MicroProbe for Creality K1 / MAX / C
klipper settings [gcode_macro PROBE_DOWN] gcode: SET_PIN PIN=probe_enable VALUE=1 [gcode_macro PROBE_UP] gcode: SET_PIN PIN=probe_enable VALUE=0 [output_pin probe_enable] pin: nozzle_mcu:PA8 value: 0 [probe] pin: ^!nozzle_mcu:PA9…
- Pobrania
- 124
- Polubienia
- 27
- Ocena
- 3
P
PrintablesVytautas Juodviršis
BIQU Microprobe bracket for Sidewinder X2
BIQU Microprobe bracket for Sidewinder X2 to mount it into original probe place.
- Pobrania
- 122
- Polubienia
- 17
- Ocena
- 5
P
PrintablesMichael
Biqu h2 fan duct and microprobe mount
Part cooling duct for biqu h2 and biqu microprobe mount. Need 2x m3x3x3.5 heat set inserts for fixing the 5015 fan and 2x m3x3x3.5 heat set inserts for fixing the probe. Added v2 for less supports when printing. Apply some glue to…
- Pobrania
- 116
- Polubienia
- 14
- Ocena
- 0
P
PrintablesJohn SC
Sovol SV08 MicroProbe mount
****************** UPDATE: I have published a redesign of this model at https://www.printables.com/model/985777-biqu-microprobe-mount-for-sovol-sv08 The redesign is far sturdier, and there are three versions for different length nozzles -…
- Pobrania
- 116
- Polubienia
- 45
- Ocena
- 5
P
PrintablesKanrog Creations
Rook 2020 MK2 CPAP & Biqu Microprobe
This is an optional Cooling duct for the Rook 2020 MK2 toolhead Using dual 5015 blowers. Theres Room for a Biqu Microprobe inside the cooler. 45cm long CPAP tube works great. Updated the position of the microprobe 02.11.24: Updated the…
- Pobrania
- 114
- Polubienia
- 36
- Ocena
- 4
P
PrintablesHash Bringer
Flying Bear Reborn 2 BIQU Microprobe mount.
Modified file from @Pixelmonster uploaded microprobe mount so it would fit CHC Pro volcano hot end. Proof of concept was printed in PETG, after-wards printed it in ASA (for use in enclosed printer), so strongly advise to prin in similar…
- Pobrania
- 111
- Polubienia
- 8
- Ocena
- 0
P
Printablestanel636
BIQU MicroProbe mount for H2 extruder.
Attatchment for MicroProbe to use with H2 type extruders.
- Pobrania
- 111
- Polubienia
- 18
- Ocena
- 0
P
PrintablesKanrog Creations
Stealthburner Microprobe Mount
Pretty simple little mount to put a BIQU Microprobe on a “stock” Stealthburner carriage mount. Goes in the same spot as the stock induction probe, and is adjustable about 10mm down to suit different hotend setups. Only tested on my Siboor…
- Pobrania
- 110
- Polubienia
- 27
- Ocena
- 0
P
PrintablesEvgenius
Qidi Q1 PRO BTT Microprobe mount V2
I've made a bracket like this before. Time to update it! Previous version More detailed instructions on connecting and changing the printer.cfg file are here!…
- Pobrania
- 107
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBuszmen
BIQU Microprobe EVA3 Mount - remix Mosquito & Dragon UHF
Recommended filament: ASA-CF, ASA, ABS. Infill 25-30, 0.2 mm layer.
- Pobrania
- 107
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLeivasDesign
Microprobe V2 Mount for NG extruder (Ender 3)
Made a Microprobe V2 mount that has the same offsets that the BLtouch mount had: X: -46 Y: -10.5 Decided to switch to the Microprobe V2 because BLtouch was giving me issues, may have been the underlying cause of bigger printer issues I've…
- Pobrania
- 107
- Polubienia
- 5
- Ocena
- 5
P
PrintablesRené Schleritzko
BIQU Microprobe mount for Elegoo Neptune 4 Max
Btt Microprobe V2 to ZNP K1 V2.0 a Dupont connector with 10K Ohm resistor as pullup for Z- end stop, yellow from the servo goes to sensor from level PA11, red+ and black- from the servo somewhere to x/y end stop, white PC3 and ground to…
- Pobrania
- 104
- Polubienia
- 21
- Ocena
- 0
P
Printablesmetalinspired
Ender 3 v2 BIQU Microprobe mount
BIQU Microprobe mount with two screws for Ender 3 v2
- Pobrania
- 103
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJohn SC
BIQU MicroProbe mount for Sovol SV08
PLEASE READ THIS NEXT PARAGRAPH CAREFULLY!!!!!!!! WARNING: You will need a M2.5x12mm Nylon screw with a washer and nut to install this mount. The attachment to the print trolley has changed, and one of the attachment points is directly…
- Pobrania
- 102
- Polubienia
- 15
- Ocena
- 4
P
Printableslochej
BCJ K1 MAX CFS upgrade kit with Microprobe
Quick demo: successful filament swaps Youtube link: https://youtu.be/2iw93cpaT3o FULL print demo video from start to finish PETG Youtube link: https://youtu.be/BmRtqx__UgM CHANGELOG 05/12/2025 - Added box_v3 and gcode_macro_v2 config…
- Pobrania
- 99
- Polubienia
- 22
- Ocena
- 5
P
PrintablesEvgenius
Fan duct Qidi Q1 PRO for microprobe BTT
Fan duct Qidi Q1 PRO for microprobe BTT Microprobe mount
- Pobrania
- 98
- Polubienia
- 12
- Ocena
- 5
P
PrintablesNixz_Leon
Sv08 Microprobe mod
change the x offset to 14.31 mm, and the y offset to 7.67 mm, and calibrate your nozzle offset accordingly Link to the probe https://biqu.equipment/products/microprobe-v1-0-for-b1-printers-h2-extruders-ender-3
- Pobrania
- 96
- Polubienia
- 31
- Ocena
- 0
P
PrintablesChris Floof
BIQU MicroProbe mount for Mercury One.1 EVA 2.4
This is a mount for the BIQU MicroProbe made to fit the Mercury One.1 ZeroG mod. It uses the short screws and nuts that comes with the probe to mount it. The probe offsets are as follows: x_offset: -35.5 y_offset: 5.0 z_offset: 1.390 Z…
- Pobrania
- 86
- Polubienia
- 7
- Ocena
- 0
P
Printablesbutre
SV07 Plus Biqu Microprobe mount
includes optional cable clip, use as shown chop the two sets of wires they sent you with the microprobe to an appropriate length and solder them together or buy a cable with the appropriate microblade connectors. this plugs in where your…
- Pobrania
- 82
- Polubienia
- 12
- Ocena
- 5
P
PrintablesChinstrap777
BTT (BIQU) Microprobe Mount for "The 100 v1.1" printer (v2.1)
Updates to V2.1 Changed the mounting holes for the microprobe from 2.8 to 3mm. Opened the X axis of the hole for the probe by 0.2mm to make it easier to insert the probe. This is an update to my previous v1.0 model. Since there wasn't a…
- Pobrania
- 80
- Polubienia
- 10
- Ocena
- 5
P
PrintablesDurtymaxNova
BIQU Microprobe V2 HMG7 mount
Made a quick mount for BIQU microprobe v2. Was hard for me to find a good solid mount so I just made up my own real quick let me know what you think or if you have any ideas. This one is setup for m2 heatset inserts but I can upload…
- Pobrania
- 79
- Polubienia
- 4
- Ocena
- 0
P
PrintablesP’tite tête
SW2 BIQU H2 V2S REVO Carriage Mount, fan duct 5015 and BiQu MicroProbe
This is a redesign of the model to take into account the BiQu MicroProbe. You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery. The assembly is planned for a 5015 blower. For the attachment on the…
- Pobrania
- 78
- Polubienia
- 4
- Ocena
- 0
P
Printablesmtczekajlo
EVA 3 BIQU MicroProbe Adjustable Mount
x_offset: +33.42 mm # positive = right of the nozzle y_offset: -11.89 mm # negative = in front of the nozzle OnShape: https://cad.onshape.com/documents/257f2d8f5473ec8420c4a889
- Pobrania
- 77
- Polubienia
- 5
- Ocena
- 5
P
PrintablesPrintux
Qidi Q1 PRO BTT Microprobe mount V2 offset fixed
For more information please check original model: https://www.printables.com/model/1360216-qidi-q1-pro-btt-microprobe-mount-v2
- Pobrania
- 77
- Polubienia
- 12
- Ocena
- 0
P
PrintablesPiro Fyre
BTT/BIQU MicroProbe holder for the Qidi Q1 Pro
For operating and using a BIQU MicroProbe on the Qidi Q1 Pro, please click here for the modified printer.cfg and gcode_macro.cfg files along with instructions on how to wire and setup the MicroProbe with the printer. Thanks to aeropic for…
- Pobrania
- 72
- Polubienia
- 12
- Ocena
- 5
P
PrintablesBrynD
Thunder 7, Ender 7 Toolhead (Ender7, LGX Lite, E3D Revo CR hotend, BIQU Microprobe)
02.12.23 Rev2. Probe Mount Face raised 0.66mm. New remix version with E3D Revo CR hotend & BIQU microprobe in place of Bambulab hotend & CRtouch. Note: See original CRtouch version for remaining files. Ender 7 replacement toolhead with…
- Pobrania
- 71
- Polubienia
- 12
- Ocena
- 0
P
PrintablesSM Prints
mini Satsana dual 4010 light with BIQU MicroProbe mount
I love this Mini Satsana style fan shroud but needed one that I could mount a BIQU Micro Probe v2. Hopefully this works for you. I am using a spider hot end rather than stock so your mileage may vary. I assume most hot-ends are shorter so…
- Pobrania
- 71
- Polubienia
- 6
- Ocena
- 3
P
PrintablesP’tite tête
SW2 BIQU H2 V2S REVO Carriage Mount, fan duct 5015 and BiQu MicroProbe Mount back
This is a redesign of the model to take into account the BiQu MicroProbe. You will find the whole project to be able to mount the BIQU H2 V2S REVO on an X2 artillery. The assembly is planned for a 5015 blower. For the attachment on the…
- Pobrania
- 69
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAshyukun
The Claw/Vampyre Biqu H2 Fan Duct with Biqu Microprobe & ADXL mounts
I have been really happy with the Biqu H2 extruder on my Tronxy X5SA-400, but had some issues with the mount for the CRTouch and on a print it actually got knocked out of place, caught the probe on the model, and bend the probe pin. When…
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 5
P
PrintablesDaboh
MicroProbe Mount Reborn 2
Mount for BIQU MicroProbe for the Reborn 2 without any lose of printspace. Offsets: x_offset: 39.0 y_offset: 0.0
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
Printablesshishu94
H2V2S Revo Microprobe holder.
Microprobe support for the Biqu H2V2S Revo.
- Pobrania
- 65
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFredrik
XOL Toolhead Biqu Microprobe mount
With the "reboot" of the Mantis XOL 2 Toolhead by Armchair-Engineering it's now modular and quite simple to add mounting brackets for a wide range of probes. I needed one for the Biqu Microprobe so i threw something together for the…
- Pobrania
- 62
- Polubienia
- 10
- Ocena
- 0
P
Printablescrosser525
Biqu Microprobe V2 Holder for Biqu V2S Revo Extruder Revo
Ich habe einen Halter für eine Biqu MicroProbe V2 entworfen. Versatz in X ist -36 und in Y 0. Der Halter ist passend für einen Biqu V2S Revo Extruder. Sie benötigen 2 M2,5x8 Schrauben und 2 M2,5 Mutter um die Sonde am Halter zu finden.
- Pobrania
- 61
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMaxim A.
Microprobe Mount for Microswiss NG
Microprobe Mount for Microswiss NG
- Pobrania
- 60
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJohn Stäck
BTT Microprobe mount for Stealthburner, low height
The “mounting ears” need to be cut off the Microprobe, I used side cutters and trimmed it with a knife. Disconnect the cable from the probe, insert it through the hole in the mount, connect it to the probe, then push the probe into place…
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 0
P
PrintablesÖmer Talha Başoğlu
BIQU MicroProbe Face Plate for The Diamond Mount
This is a crude part for mounting BIQU MicroProbe face plate to The Diamond Mount from @laurienzudesi_249338. Not my finest work but fits very good. Logo of The Diamond Mount litte bit strechted and bottom of it is a little bit thin so…
- Pobrania
- 60
- Polubienia
- 8
- Ocena
- 5
P
PrintablesLepresean
Flsun v400 mount for BIQU MicroProbe V2.0
After ruining a few factory probes I decided to look into upgrades. I haven't purchased one yet but in case anyone else would like to try here you go.
- Pobrania
- 60
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSilencedFrost
SV06+ (Plus) Biqu microprobe mount
Been looking for a biqu microprobe mount for the SV06+? It's right here! Built extra beefy that's meant to last, minimize any possible deflection to give accurate probe readings Uses provided hardware so all you need is the printed mount!…
- Pobrania
- 58
- Polubienia
- 7
- Ocena
- 5
P
PrintablesBen Hechis
Ender 7 / Biqu Microprobe Mount
Einfache Halterung für Biqu Microprobe, sitzt rechts hinter dem Hotend, kein Verlust von XY-Weg, hab sie in Kombination mit einer angepassten Lüfterhalterung in Verwendung. 100% Infill
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
PrintablesElohel_models
E34m1 mercury one.1 BIQU microprobe mount
E34m1 mercury one.1 BIQU microprobe mount be carefull with the mounting screws its not the strongest mount due to the placement
- Pobrania
- 56
- Polubienia
- 11
- Ocena
- 0
P
PrintablesMaxgames17
Biqu microprobe V2 ender 3 pro Volcano CHC Pro mount
New version here: https://www.printables.com/model/1375025-biqu-microprobe-v2-ender-3-pro-volcano-mount-v2-ch Mount for the biqu microprobe V2 (should be the same for the V1) for the ender3pro (and other printers with the same cover) with…
- Pobrania
- 54
- Polubienia
- 5
- Ocena
- 0
P
PrintablesRST Designs
Eva 2.4 MicroProbe
This is a mount for the Biqu MicroProbe on the EVA 2.4 on my Mercury One.1. Mounts on the left side as shown. If needing a right side just mirror this. Needs 2x-m2.5 heatset inserts. The hotend im using is a Triangle Labs Dragon V6. (5 mm…
- Pobrania
- 52
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGol de Señor
Artillery Genius PRO/SideWinder X2 Biqu Microprobe v2.0
This is an adapter to use BIQU Microprobe: https://github.com/bigtreetech/MicroProbe/blob/master/MicroProbe%20V2%20User%20Manual_20231115.pdf In our artilleries (because Artilleries BLTouch is too inacurate) Just print it in PLA or PETg…
- Pobrania
- 51
- Polubienia
- 6
- Ocena
- 0
P
PrintablesBrynD
Thunder 7, Ender 7 Toolhead (Ender7, LGX Lite, Bambu Lab hotend, BIQU Microprobe)
New remix version with BIQU microprobe in place of CRtouch. Note: See original CRtouch version for remaining files. There is also a E3D Revo CR remix version. Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh…
- Pobrania
- 50
- Polubienia
- 13
- Ocena
- 0
P
Printables828RM
Biqu Microprobe Mount for HMG7
Basic mount for a Biqu Microprobe which stacks into the mount holes for the 10mm cable management tower.
- Pobrania
- 50
- Polubienia
- 9
- Ocena
- 0
P
PrintablesStanlyP
2. Artilleri X4 PRO / PLUS - Upgrade new Belt X + Microprobe V2 (model repair)
Upgrade new Belt X: ( It was tested on Artilleri X4 plus ) Models were printed from ASA (PETG) Precision 0.12 mm Speed 150mm/s Material used for X4-Belt tensioner:…
- Pobrania
- 48
- Polubienia
- 9
- Ocena
- 0
P
PrintablesRST Designs
Stealthburner MicroProbe
This is a mount for the Voron Legacy to Stealthburner toolhead mount for use with a Biqu Microprobe. 2pc m2.5 self tap into the print. will probably modify later to take heatsets and reprint from ABS. I will update this with that option…
- Pobrania
- 47
- Polubienia
- 7
- Ocena
- 0
P
PrintablesNiftyStudioMX
HeroMe Gen 7 mount for Biqu Microprobe ABL Sensor
This mount comes from the left side flat mount for ABL sensors
- Pobrania
- 47
- Polubienia
- 4
- Ocena
- 5
P
PrintablesFlo
![Biqu Microprobe V2 Mount for Anycubic i3 Mega X-Carriage [MK4]](https://media.printables.com/media/prints/852717/images/6558540_0344410d-7992-4372-a6d4-9858277e0923_d1687d00-027e-4db6-8ab7-567d8b00bfe8/render.png)
Biqu Microprobe V2 Mount for Anycubic i3 Mega X-Carriage [MK4]
This is a remix of the Anycubic i3 Mega X-Carriage [MK4] to use Biqu's Microprobe instead of a BLTouch
- Pobrania
- 46
- Polubienia
- 5
- Ocena
- 0
P
Printablescheapassfernie
K1 BIQU MicroProbe Mount with Adjustable Height
print solid. add super glue to nuts to prevent them loosening over time.
- Pobrania
- 45
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDiabeto
BIQU MicroProbe V2.0 mount for Voron Stealthburner / Prusawire
Description Biqu microprobe V2 mount for X-carriage used in Prusawire / Stealthburner Hardware needed Biqu microprobe V2 2x heated insert M3 (4.6mm x 5.7mm) 2x M2.5 screws (short) and 2x M2.5 washers delivered with the microprobe V2 2x…
- Pobrania
- 44
- Polubienia
- 11
- Ocena
- 0
P
PrintablesKanrog Creations
Sentinel BIQU Microprobe
Put a BIQU Microprobe on your Sentinel! The spacer is there if your fan is like mine and sticks out slightly. All files are ready to print, no supports needed. No heatsets, I use M3x6 to attach the probe, the M2.5 that comes with the…
- Pobrania
- 44
- Polubienia
- 10
- Ocena
- 0
P
PrintablesPhantom16361
BTT Microprobe bracket for Ender3 V2
Meant to use on a Ender 3 V2 that runs Davinci2000's Ender 3 LED Mosquito cooling mod to attach the BTT Microprobe. Probe offset: x_offset: -42.5 y_offset: 3 Config when using BTT SKR mini E3 V3: [output_pin probe_enable] pin: PA1 value:…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
Printablesbluebyte79
Flying Bear Reborn 2 Biqu Microprobe Mount
I remixed the mount for the microprobe because the pin of the probe is very short which made it impossible for me to get the right distance to the printing bed. So I made the height of the mount adjustable. Use a washer with the original…
- Pobrania
- 43
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGattone
BLTouch Microprobe Support
This is a support for microprobe and BIQU TC extruder specifics
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
Printablesigez
Stealthburner Biqu Microprobe Mount
Biqu Microprobe mount, it have clearance with nozzle when deployed approx ~2.5mm, print using standard voron settings Layer height: .2mm Infil: 40% Wall: 4 Top & Bottom surface: 5 Klipper probe setting: x_offset: -44.8 y_offset: 2.64…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 0
P
PrintablesBootStrap
MicroProbe mount - DragonBurner - Rear
Dragon Burner - with a BIQU Micro Probe Mounted to the back Height for Voron Revo Nozzle If you are using the EBB36 Tool Board - Brief Instructions on how to wire as well as the Klipper Code included. Make sure you know the version of…
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSplashD
Xol Toolhead Biqu Microprobe mount (HF version)
This model will mount the Biqu Microprobe on the Xol toolhead, for use with HF hotend types. This version will present the probe ~8mm higher than Fredrik's UHF version. The fit of the Microprobe mount ‘ears’ with the x-carriage has close…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
PrintablesSeturian
Flying Bear Ghost 6 Biqu microprobe mount v2
For optimal results, you must use the original model text. Additionally, the layer height should be set to 0.12. Use supports. Use engineering plastics starting with PLA and stronger, as the part operates in hot conditions. PETG and PLA…
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 4
P
Printablesgeb
Elegoo Neptune 2 Biqu microprobe mount
I used this model as a base https://www.thingiverse.com/thing:4851820 . Probe offsets should be about the same as the regular bltouch mount offset for the neptune 2 e.g NOZZLE_TO_PROBE_OFFSET { 32.55, 3, 0 } in marlin. Z offset will…
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 5
P
PrintablesNick Husby
Rogue Orbiter MicroProbe Mount
A customized probe mount for the BIQU MicroProbe on a Rogue Orbiter toolhead equipped with a Volcano nozzle. Tested with Biqu MicroProbe and Triangle Labs CHC Pro V6 Volcano hotend.
- Pobrania
- 35
- Polubienia
- 5
- Ocena
- 0
P
PrintablesElias
BIQU Microprobe V2 Mount for E3NG
The original one was a bit short. Remixed it to make it have a bit of extra wiggle room. Cover images taken on iPhone 14 Made in Fusion 360
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJan M
BQ Microprobe for Apogee Toolhead
I remixed the original holder to fit the BQ microprobe
- Pobrania
- 34
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCosmin Dumitrescu
Biqu microprobe Eva3 Fan Shroud Mount.
The main issue i had with the model available is that it was on the side and always moved so i had to readjust offset. Warning! Do not recommend this with an enclosed printer or high temperatures, The Biqu microprobe seems to be very bad…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
Printableshappy3dth
X4 btt microprobe cover
slight remix of the X4 micro probe cover. adding a little strength to the area of the micro probe. Follow the instuctions in the original post.
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDK
BIQU MicroProbe Holder For BIQU H2 Series Extruders
BIQU MicroProbe Holder for BIQU H2 Series Extruders Compatible Probes: BIQU MicroProbe V1.0 BIQU MicroProbe V2.0 Compatible Extruders: BIQU H2 V2 BIQU H2 V2S BIQU H2 V2S Lite BIQU H2 V2S Lite Revo BIQU H2 V2S Revo BIQU H2 V2X Please give…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMrMysteryV
K1 BIQU microprobe v2 mount (lower offset)
Also allows the stock Lidar mounting bolts to be used.
- Pobrania
- 29
- Polubienia
- 4
- Ocena
- 0
P
PrintablesEvgenius
QIDI XMAX3 BTT MicroProbe mount
По сути это перерисованный кронштейн с моими изменениями. Оригинальную модель не удалось экспортировать в твердое тело и я просто оцифровал эту модель и изменил ее исправив некоторые моменты. Схема подключения выглядит следующим образом:…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 5
P
PrintablesDane
BL Touch Mount & Mount for MicroProbe v2
BL-Touch FanMount for Ender 3 V2 with Micro Swiss NG Extruder. I have addet a Mount for MicroProbe v2.
- Pobrania
- 29
- Polubienia
- 0
- Ocena
- 5
P
Printablesdavide Sgambetterra
Microprobe V2 mount for Artillery X4 Pro / Plus
I designed this mount to avoid printing a new extruder case. It attaches to the rear plate of the extruder using the same screw that holds the original inductive probe. No special parts are needed; it only reuses the original screws from…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesJohn de Almeda
Sunlu S8 BIQU Microprobe V2 adapter
Made to work with King Uni-t Shroud. Will need 24mm long M2 or M2.5 Bolts. Link below for the shroud. https://www.printables.com/model/288580-king-uni-t-shroud-universal-hotend-shroud
- Pobrania
- 28
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTobias Stanzel
Biqu MicroProbe Mount for Voron Micro+
A mount for the biqu microprobe and the voron micron+ including 2 leds. For the leds you need two of those: https://www.amazon.de/gp/product/B0B8D53RMS/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Pics with the part in red show my…
- Pobrania
- 27
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMaarten
BiQu BTT Microprobe mount for Kappy
This is a modified version of the original toolhead mount (from CAD) for Rolohaun Design's Kappy printer: https://www.printables.com/model/625544-kappy-3d-printer/files to support the BiQu (BTT) MicroProbe instead of the BlTouch.…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesWnrsm
E34M1 BTT MicroProbe ABL Mount for Rapido HF and Rapido UHF
Requires two hot melt inserts. I placed the wiring on the outside so that it is easy to reach and has a smaller x-offset for the probe. I printed mine with ASA at 100% infill.
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRadiant
MicroProbe V2 mount for Frank 2.0
Designed to only need the M2.5 hardware already included with the probe, as well as the same M3 threaded inserts used for the rest of the toolhead assembly. No supports needed. If the mount doesn't reach down far enough for your toolhead,…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0