1 / 20
Voron StealthBurner Mount for Biqu / BTT MicroProbe
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mount is designed to allow the MicroProbe to be mounted in the same location is an inductive probe
- Ocena
- 4,667 / 5
- Polubienia
- 41
- Pobrania
- 381
- Wydruki
- 3
- Wyświetlenia
- 2036
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (2)Kolekcje (50)Powiązane
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a print head crash.
Compatibility:
- I've designed this to work in all the official Voron StealthBurner X carriage mounts, including my own Ender 3 / Mega Zero version.
Instructions:
- Print both parts in ASA or ABS with the normal Voron settings for a 0.4mm Nozzle
- As per the pics, remove the "Ears" from the MicroProbe. If you use care and a jigsaw blade, it will not damage it. Then file the sides flat.
- While the MicroProbe is a press-fit into the mount, I recommend a dab of Super Glue on the top and sides of the probe to ensure it will stay in place when the parts all get warm.
- Installation is essentially the same as the Inductive probe, as per pages 59-60 of the StealthBurner manual.
- Make sure you use the short M3 Heat-Set nuts for the Probe Mount.
- For Klipper users, I've included my
probe_MicroProbe.cfgfile as an example config
Probe Off-sets:
- X = 0
- Y = 20
CAD file has been included for remixing.