1 / 20
Voron StealthBurner Mount for Biqu / BTT MicroProbe
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mount is designed to allow the MicroProbe to be mounted in the same location is an inductive probe
- Rating
- 4.667 / 5
- Likes
- 42
- Downloads
- 384
- Makes
- 3
- Views
- 2,047
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This Voron StealthBurner Mount for the Biqu / BTT MicroProbe is designed to allow the MicroProbe to be mounted in the same location is an inductive probe. As a result no X offset is needed and the probe is well protected in the event of a print head crash.
Compatibility:
- I've designed this to work in all the official Voron StealthBurner X carriage mounts, including my own Ender 3 / Mega Zero version.
Instructions:
- Print both parts in ASA or ABS with the normal Voron settings for a 0.4mm Nozzle
- As per the pics, remove the "Ears" from the MicroProbe. If you use care and a jigsaw blade, it will not damage it. Then file the sides flat.
- While the MicroProbe is a press-fit into the mount, I recommend a dab of Super Glue on the top and sides of the probe to ensure it will stay in place when the parts all get warm.
- Installation is essentially the same as the Inductive probe, as per pages 59-60 of the StealthBurner manual.
- Make sure you use the short M3 Heat-Set nuts for the Probe Mount.
- For Klipper users, I've included my
probe_MicroProbe.cfgfile as an example config
Probe Off-sets:
- X = 0
- Y = 20
CAD file has been included for remixing.