BIQU MicroProbe mount for Mercury One.1 EVA 2.4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount for the MicroProbe to fit the Mercury One.1 EVA 2.4 toolhead
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 475
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a mount for the BIQU MicroProbe made to fit the Mercury One.1 ZeroG mod.
It uses the short screws and nuts that comes with the probe to mount it.
The probe offsets are as follows:
x_offset: -35.5
y_offset: 5.0
z_offset: 1.390
Z offset is based on JP's Revo Voron mount. Calibrating the offset is always recommended.
https://www.printables.com/model/449902-eva-24-revo-voron-faceplate-heat-set-inserts
UPDATE:
A “thick” and “thicker” version has been added which should be more resistant to bending in case the probe hits a curled overhang or blob on the print surface. This might damage the probe instead though.